|Skip Navigation Links|
|Exit Print View|
|Sun Datacenter InfiniBand Switch 36 HTML Document Collection for Firmware Version 2.0|
When you want to know if the voltages used by the various components within the switch are within nominal values, use the checkvoltages command. If a voltage deviates more than 10% of its nominal value, there is a problem. This check also reports if a battery has failed.
# checkvoltages Voltage ECB OK Measured 3.3V Main = 3.27 V Measured 3.3V Standby = 3.35 V Measured 12V = 11.97 V Measured 5V = 5.02 V Measured VBAT = 3.24 V Measured 2.5V = 2.52 V Measured 1.8V = 1.78 V Measured I4 1.2V = 1.22 V All voltages OK #