Use the following commands and values to configure the VLAN interfaces in SEFOS4 used in the example topologies presented in this guide (VLAN 11, VLAN 3, and VLAN 4).
SEFOS# configure terminal SEFOS(config)# interface vlan 11 SEFOS(config-if)# shut SEFOS(config-if)# ipv6 enable SEFOS(config-if)# ipv6 address fec0::1111:0:4/96 SEFOS(config-if)# no shut SEFOS(config-if)# exit SEFOS(config)# interface vlan 3 SEFOS(config-if)# shut SEFOS(config-if)# ipv6 enable SEFOS(config-if)# ipv6 address fec0::3333:0:1/96 SEFOS(config-if)# no shut SEFOS(config-if)# exit SEFOS(config)# interface vlan 4 SEFOS(config-if)# shut SEFOS(config-if)# ipv6 enable SEFOS(config-if)# ipv6 address fec0::4444:0:1/96 SEFOS(config-if)# no shut SEFOS(config-if)# exit