Connect to SEFOS

To configure the SEFOS software, you must first establish a connection to your system and then connect to SEFOS through Oracle ILOM.

1. Log in to the Oracle ILOM CLI.

   See Connect to the Serial Console for Initial Configuration.

2. Connect to SEFOS.

   ES2-> cd /SYS/fs_cli
   cd: connecting to Fabric Switch CLI
    
   ES2-72-primary SEFOS#
   ES2-72-primary SEFOS# show system information
    
   Hardware Version : 3.3.11_00306215
   Firmware Version : ES2-R72-2.0.0.1
    
   Hardware Part Number : 1-0-0
   Software Serial Number : 1-0-0
   Software Version : 7.3.2
   Switch Name : Oracle-ES2-72
   System Contact :
   System Location :
   Logging Option : Console Logging
   Device Uptime : 0 Days, 0 Hrs, 6 Mins, 51 Secs
   Login Authentication Mode : Local
   Config Save Status : Not Initiated
   Remote Save Status : Not Initiated
   Config Restore Status : Not Initiated
   Traffic Separation Control : none
   ES2-72-primary SEFOS#
   

   You are now connected to SEFOS, and you can begin to configure the SEFOS features.

Related Information

• Basic SEFOS Topology

• Disconnect From SEFOS