Copy a Configuration File From a Remote Location to Flash

This task describes how to copy the backup configuration file from a remote location to the location of the default configuration directory path (/conf/sefos) for restoration. The remote location must be on a host connected to one of the 72 or 64 ports on the switch.

1. Connect to SEFOS.

   See Connect to SEFOS.

2. Copy the startup configuration file switch.conf stored in the host 12.0.0.100 to the current path (/conf/sefos).

   SEFOS-1# copy tftp://12.0.0.100/switch.conf startup-config
   SEFOS-1#
   

Related Information

• Copy a Configuration File to a Remote Location

• Copy a Configuration File From One Remote Location or Flash to Another Remote Location or Flash