Go to main content

Oracle® Server X6-2 Service Manual

Exit Print View

Updated: January 2021

Reinstall the Server Into the Rack

If you removed the server chassis from the rack, perform these steps to reinstall it.


Caution  - Deploy any rack anti-tilt mechanisms before installing the server into the rack.


Caution  -  The server weighs approximately 18.1 kg (40.0 lbs). Two people are required to carry the chassis and install it into the rack.

  1. Push the slide-rails into the slide-rail assemblies in the rack as far as possible.
  2. Raise the server so that the rear ends of the mounting brackets are aligned with the slide-rail assemblies that are mounted in the rack.
  3. Insert the mounting brackets into the slide-rails, and then push the server into the rack until the mounting brackets encounter the slide-rail stops, approximately 30 cm (12 inches).

    The server is now in the extended maintenance position.

    image:Figure that shows how to insert the server into the rack.
    Inserting mounting brackets into slide-rails
    Slide-rail release tab (green)
    Slide-rail lock

Related Information