Go to main content

Oracle® Server X6-2 Service Manual

Exit Print View

Updated: January 2018
 
 

Product Description

The Oracle Server X6-2 is an enterprise-class, one rack unit (1U) server. It supports the following components:

  • Up to two Intel processors. Processors with the following capabilities are supported:

    • 22-core, 2.2 GHz, 145W processors

    • 14-core, 2.6 GHz, 135W processors

    • 10-core, 2.2 GHz, 85W processors

    • 6-core, 3.4 GHz, 135W processors

  • Up to 12 DIMMs per processor for a maximum of 24 DDR4 DIMMs and a maximum of 1.5 TB of memory are supported in dual-processor systems. A maximum of 12 DDR4 DIMMs and a maximum of 768 GB of memory are supported in single-processor systems. RDIMMs (16 GB and 32 GB) and LRDIMMs (64 GB) are supported.

  • Four PCIe Gen3 slots in dual-processor systems: one slot, slot 4, is dedicated to the internal HBA. PCIe slot 1 is nonfunctional in single-processor systems.

  • Four Ethernet ports (NET0, NET1, NET2, and NET3 located on the rear of the server) are supported on dual-processor systems.


    Note -  Ethernet ports NET2 and NET3 are nonfunctional on single-processor systems.
  • Storage drive configurations include a DVD drive (optional) and up to eight hard disk drives (HDDs) or solid state drives (SSDs), with optional support for up to four PCIe-based NVMe (non-volatile memory express) SSD drives.

  • Two hot-pluggable, redundant power supplies.

  • An on-board Oracle Integrated Lights Out Manager (Oracle ILOM) service processor (SP) based on the Emulex Pilot3 chip.