|
|
|
|
|
/SYS/MB
|
FRU
|
General host system board FRU
|
|
|
/SYS/MB/CPLD
|
FRU
|
Mainboard CPLD/FPGA firmware version
|
|
|
/SYS/MB/NET[0-3]
|
FRU
|
Host Ethernet FRU
|
|
|
/SYS/MB/RISER[1-3]/PRSNT
|
Discrete sensor
|
PCIe riser inserted into PCIe slot
|
01h-ENTITY_ABSENT
02h-ENTITY_PRESENT
|
|
/SYS/MB/RISER1/PCIE1/PRSNT
|
Discrete sensor
|
Option card inserted into PCIe riser 1
|
01h-ENTITY_ABSENT
02h-ENTITY_PRESENT
|
|
/SYS/MB/RISER2/PCIE2/PRSNT
|
Discrete sensor
|
Option card inserted into PCIe riser 2
|
01h-ENTITY_ABSENT
02h-ENTITY_PRESENT
|
|
/SYS/MB/RISER3/PCIE3/PRSNT
|
Discrete sensor
|
Option card inserted into slot 3 of PCIe riser 3
|
01h-ENTITY_ABSENT
02h-ENTITY_PRESENT
|
|
/SYS/MB/RISER3/PCIE4/PRSNT
|
Discrete sensor
|
Internal HBA card inserted into slot 4 of PCIe riser 3
|
01h-ENTITY_ABSENT
02h-ENTITY_PRESENT
|
|
/SYS/MB/RISER1/PCIE1/PCIESW
|
FRU
|
Optional Oracle PCIe NVMe switch card, dedicated slot
|
01h-ENTITY_ABSENT
02h-ENTITY_PRESENT
|
|
/SYS/MB/RISER1/PCIE1/PCIESW/PRSNT
|
FRU
|
Optional Oracle PCIe NVMe switch card inserted into slot 1 of PCIe
riser 1, dedicated slot
|
01h-ENTITY_ABSENT
02h-ENTITY_PRESENT
|
|
/SYS/MB/T_OUT_SLOT[1-3]
|
Threshold sensor
|
Cooling zone chassis exhaust temperature, located behind the specified
PCIe slots.
-
Slot 1 – PCIe slot 1
-
Slot 2 – PCIe slot 2
-
Slot 3 – PCIe slot 3
|
Degrees Celsius
|
|
/SYS/MB/T_IN_SLOT[1-3]
|
Threshold sensor
|
Cooling zone chassis inlet temperature, located in front of the
specified PCIe slots.
-
Slot 1 – PCIe slot 1
-
Slot 2 – PCIe slot 2
-
Slot 3 – PCIe slot 3
|
Degrees Celsius
|
|
/SYS/MB/T_CORE_NET01
|
Threshold sensor
|
Gigabit Ethernet controller die temperature
|
CPU 0, NET 0+1 Degrees Celsius
|
|
/SYS/MB/T_CORE_NET23
|
Threshold sensor
|
Gigabit Ethernet controller die temperature
|
CPU 1, NET 2+3 Degrees Celsius
|
|
/SYS/MB/T_IN_SLOT[1-3]
|
Threshold sensor
|
PCIE slot input temperature
|
Degrees Celsius
|
|
/SYS/MB/T_OUT_SLOT[1-3]
|
Threshold sensor
|
PCIE slot output temperature
|
Degrees Celsius
|
|
/SYS/MB/T_IN_PS
|
Threshold sensor
|
Power supply unit (PSU) inlet temperature, located directly in front
of the PSU 0 air inlet.
|
Degrees Celsius
|
|
/SYS/SP
|
FRU
|
Service processor FRU
|
|
|
/SYS/SP/OK
|
Indicator
|
SP OK LED
|
Color: Green
Location: Front panel
On: SP is operating.
Off: SP requires service.
|
|
/SYS/SP/NET[0-1]
|
FRU
|
SP Ethernet FRU
|
|