Configure an Externally Accessible IP Address on the NEM (Ethernet and Web Interface)

1. In a web browser, type the IP address of the CMM in the location bar.

   The chassis view appears.

   
   
2. Connect to the NEM ILOM using either of the following methods:

   • From the left navigation bar, select the NEM that you want to connect to.

   • Scroll over the graphical representation of the chassis and select the NEM that you want to connect to.

   The NEM ILOM for that NEM appears.

   
   
3. Select Configuration from the first row of tabs.
4. Select Network from the second row of tabs.

   The Network Settings page for the NEM appears.

   
   
5. Configure the network settings for the NEM:

   • In the State field, select Enabled.

   • In the IP Discovery Mode field, select Static.

   • Enter the IP Address, Netmask, and Gateway information in the appropriate fields.

6. Click on the Save button.

Related Information

• Configure an Externally Accessible IP Address on the NEM (Serial Connection and CLI)

• Configure an Externally Accessible IP Address on the NEM (Ethernet and CLI)

• Connect to the NEM ILOM (Ethernet and Web Interface)

• Connect to the NEM ILOM (Ethernet and CLI)