Identify Faulted Components

Language:

The fmadm faulty command displays the list of faults detected by PSH (Predictive Self Healing). You can run this command from the host or through the Oracle ILOM fault management shell.

From the Oracle ILOM prompt, start the fault management shell and type fmadm faulty.

This example shows how to check for faults through the Oracle ILOM fault management shell. You can also check for faults by typing show faulty at the Oracle ILOM prompt.

-> start /SP/faultmgmt/shell
Are you sure you want to start /SP/faultmgmt/shell (y/n)? y
 
faultmgmtsp> fmadm faulty
------------------- ------------------------------------ -------------- -------
Time                UUID                                 msgid          Severity
------------------- ------------------------------------ -------------- -------
2015-01-16/17:55:26 f4ee56c-9fdd-ca19-efb5-ae39675dfee3  SPT-8000-PX    Major
 
Problem Status   : open
Diag Engine      : fdd 1.0
System
  Manufacturer   : Oracle Corporation
  Name           : SPARC T8-2
  Part_Number    : 12345678+11+1
  Serial_Number  : 1238BDC0DF
 
----------------------------------------
Suspect 1 of 1
  Fault class  : fault.component.misconfigured
  Certainty    : 100%
  Affects      : /SYS/MB/CM1/CMP/MR3/BOB1/CH1/DIMM
  Status       : faulted
  FRU
     Status      : faulty
     Location    : /SYS/MB/CM1/CMP/MR3/BOB1/CH1/DIMM
     Manufacturer      : Hynix Semiconductor Inc.
     Name              : 8192MB DDR4 SDRAM DIMM
     Part_Number       : 70xx001,HMA4xxR7MFRxx-TFT8
     Revision          : 01
     Serial_Number     : 465769T+02xxx102WR
     Chassis
        Manufacturer   : Oracle Corporation
        Name           : SPARC T8-2
        Part_Number    : 12345678+13+2
        Serial_Number  : 1248DC140
 
Description : A FRU has been inserted into a location where it is not
              supported.
 
Response    : The service required LED on the chassis may be illuminated.
 
Impact      : The FRU may not be usable in its current location.
 
Action      : Please refer to the associated reference document at
              http://support.oracle.com/msg/SPT-8000-PX for the latest
              service procedures and policies regarding this diagnosis.
faultmgmtsp>

In this example, a fault is displayed that includes these details:

Date and time of the fault (2015-01-16/17:55:26).
UUID (f4ee56c-9fdd-ca19-efb5-ae39675dfee3), which is unique to each fault.
Message ID (SPT-8000-PX), which can be used to obtain additional fault information from Knowledge Base articles.

Use the message ID to obtain more information about this type of fault.
1. Obtain the message ID from console output (SPT-8000-PX in the example above).
2. Go to https://support.oracle.com, and search on the message ID in the Knowledge tab, or type the URL from the Action field into a browser.

Follow the suggested actions to repair the fault.

If necessary, clear the fault manually.
See Clear a Fault Manually.

SPARC T8-2 Server Service Manual

Identify Faulted Components

Related Information