Install a PCIe Card or Filler
| Caution -
This procedure requires that you handle components that are sensitive to
ESD which can cause server components to
fail.
|
Note -
Always update optional PCIe card firmware to the latest supported version.
Refer to the PCIe card documentation for firmware update instructions.
-
Take the necessary ESD precautions.
See Prevent ESD Damage.
- Ensure that the server is powered
off and all power cords are disconnected from the server power supplies.
See Removing Power From the Server.
- Determine which slot to install
the PCIe card in.
If you are not replacing an existing PCIe card and need information
about deciding which slot to install the card in, see PCIe Card Configuration.
- Disengage the PCIe card slot
crossbar from its locked position by pulling it toward the interior
of the chassis.
The crossbar might already be disengaged if you removed a PCIe card or filler from that
slot.
- Install the PCIe card or filler into the card slot and return the crossbar to its closed and
locked position.
-
See these figures if you are installing a PCIe card.
-
See these figures if you are installing a PCIe card filler.
-
Return the server to operation.
See Returning the Server to Operation.
-
Verify that the card is properly installed.
See Verify a PCIe Card.
-
Configure the PCIe card.
Refer to the documentation shipped
with the PCIe card for information about configuring the PCIe card,
including installing required operating systems.