Replace the Top Cover
- Place
the top cover on the chassis (panel 1).
A metal air baffle is attached to the rear inside surface of the top cover. When you place the top cover on the server, ensure that the air baffle does not catch on anything inside the server.
Set the cover down so that it is about 1 inch (2.5 cm) forward of the rear of the server.
- Slide the top cover toward the rear of the chassis until the rear cover lip engages with the rear of the chassis.
- Close the top cover by pressing down firmly on the cover with both hands, on the two locations
highlighted in green marked "Push here to latch", until both latches
engage.
Caution - Failure to completely secure the top cover may cause the server to malfunction.
- Return the server to its normal operating position.