Go to main content

Oracle® X4 Series Servers Administration Guide

Exit Print View

Updated: April 2016

Set SP Clock Properties (Oracle System Assistant)

image:Icon for Oracle System Assistant

Use Oracle System Assistant to set the SP clock properties when your are configuring your system.

  1. Access Oracle System Assistant.

    See Accessing Oracle System Assistant for details.

  2. Click Configure Hardware, and then click the Service Processor Configuration tab.

    The Service Processor Configuration screen appears.

  3. Select Clock Settings from the drop-down list.

    The Clock Settings screen appears.

  4. View or modify the following clock settings:
    1. Date

      Use the drop-down list to select the month, day, and year.

    2. Time

      Use the drop-down list to set the time using 24-hour format.

    3. Timezone

      Use the drop-down list to select the time zone.

    4. Synchronize Time Using NTP

      Click the check box to enable synchronization with a Network Time Protocol (NTP) server.

    5. If you selected to synchronize time using NTP, add IP addresses for NTP Servers 1 and 2.
  5. When you are done, click Apply Settings.

    Oracle System Assistant either applies the changes or displays a message stating that the changes cannot be applied until the next boot.