Configure ASR on SPARC T5-8 Servers (Oracle ILOM)

To configure the Oracle ILOM for SPARC T5-8 servers, complete the following steps on each SPARC T5-8 server:

1. Log in to the SPARC T5-8 server Oracle ILOM.
2. Display the available rules:

   # show /SP/alertmgmt/rules

   This lists the rules available, similar to the following:

   1

   2

   3

   ...

   15

3. Pick one of the rules and type the following command to determine if that rule is currently being used:

   # show /SP/alertmgmt/rules/rule-number

   For example:

   # show /SP/alertmgmt/rules/1

   • If you see output similar to the following:

     Properties:

     type = snmptrap

     level = minor

     destination = 10.60.10.243

     destination_port = 0

     community_or_username = public

     snmp_version = 2c

     testrule = (Cannot show property)

     this rule is currently being used and should not be used for this exercise (the destination address shown would be the IP address of the ASR Manager in this case). If you see output similar to the preceding example, pick another rule and type the show /SP/alertmgmt/rules/rule-number command again, this time using another rule in the list.

   • If you see output similar to the following:

     Properties:

     type = snmptrap

     level = disable

     destination = 0.0.0.0

     destination_port = 0

     community_or_username = public

     snmp_version = 1

     testrule = (Cannot show property)

     this rule is currently unused and can be used for this exercise.

4. Type this command using the unused rule:

   # set /SP/alertmgmt/rules/unused-rule-number type=snmptrap level=minor destination=IP-address-of-ASR-Manager snmp_version=2c community_or_username=public

5. Log in to the ASR Manager server.
6. Activate Oracle ILOM for the SPARC T5-8 server:

   asr> activate_asset -i ILOM-IP-address

7. Repeat these instructions on Oracle ILOM for both SPARC T5-8 servers in your Oracle SuperCluster T5-8.
8. When you have completed these instructions for both SPARC T5-8 servers in Oracle SuperCluster T5-8, approve and verify contacts to the SPARC T5-8 servers on MOS.

   See Approve and Verify ASR Asset Activation for those instructions.

   For more information on the process, see ASR MOS 5.3+ Activation Process (Doc ID 1329200.1).