Go to main content
Index
A
- admin
- changing passwords
Add Users and Change Passwords (Enhanced PDU)
Add Users and Change Passwords (Original PDU)
- Admin/User fields
Add Users and Change Passwords (Enhanced PDU)
Add Users and Change Passwords (Original PDU)
- alarms
- checkbox
Send System Log Messages to Systems on the Network (Enhanced PDU)
- description
Monitor the Enhanced PDU (HTML Interface)
Monitor the Enhanced PDU (HTML Interface)
Color Descriptions of PDU Module Measurements
Current and Voltage Measurement Colors
- out of balance
Monitor an Original PDU (HTML Interface)
- parameter
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
- setting
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
- SNMP trap descriptions
Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
Types of PDU Metering Unit SNMP Traps (Original PDU)
- system log messages
- description
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- enabling
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- ampere measurements
Monitor the Enhanced PDU (HTML Interface)
Monitor the Enhanced PDU (LCD Screen)
Monitor an Original PDU (HTML Interface)
Monitor an Original PDU (LCD Screen)
- antistatic wrist strap, attaching
Prepare to Install a PDU
C
- cable mounting brackets, securing leads to
Install a PDU
- circuit breakers
- capacity, facility
Circuit Breaker Capacity and Characteristics
- positioning on a PDU
Install a PDU
- power off
Connect the PDU to the AC Power Source
- power on
Connect the PDU to the AC Power Source
- resetting after a fault
Circuit Breaker Overview
- CLI Commands
Understanding CLI Commands
- crossover cable
- diagram
Crossover Cable Pinout Diagram
- requirements
Prepare to Connect an Original PDU to a Static IP Address Network
- Current Measurement page
- color description
Monitor the Enhanced PDU (HTML Interface)
Current and Voltage Measurement Colors
- connecting PDU to network
Connect an Original PDU to a DHCP Network
- monitoring current
Monitor the Enhanced PDU (HTML Interface)
Monitor an Original PDU (HTML Interface)
- current, monitoring
Monitor an Original PDU (LCD Screen)
D
- date of manufacture
View Module Information (Original PDU)
- Daylight Savings Time, setting
Set the PDU System Time
- depth
- PDU
PDU Physical Specifications
- DHCP Enable checkbox
Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
Connect an Original PDU to a Static IP Address Network
Connect an Original PDU to a DHCP Network
- DHCP network
- connection
Connect an Enhanced PDU to a DHCP Network
Connect an Enhanced PDU to a DHCP Network
Connect an Original PDU to a DHCP Network
- disabling
Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
Connect an Original PDU to a Static IP Address Network
- permanently enabling
Connect an Original PDU to a DHCP Network
- temporarily enabling
Connect an Original PDU to a DHCP Network
- dimensions
PDU Input Leads and Outlet Groups on Three-Phase PDUs
PDU Input Leads and Outlet Groups on Single-Phase PDUs
- PDU
PDU Physical Specifications
- dladm command
Configure an Oracle Solaris System for a Point-to-Point Connection
E
- enhanced PDU
- installing
Installing PDUs
- monitoring
Monitoring Enhanced PDUs
- removing
Remove a PDU
- specifications
PDU Physical Specifications
- ESD grounding strap
- banana jack socket
Prepare to Install a PDU
- Ethernet
- crossover cable
Crossover Cable Pinout Diagram
Prepare to Connect an Original PDU to a Static IP Address Network
- port location
Connect an Enhanced PDU to a DHCP Network
- port, location
Connect an Original PDU to a DHCP Network
F
- facility power
- connecting PDU
Connect the PDU to the AC Power Source
- requirements
Facility Power Requirements
- factory-reset button
Restore the PDU to Factory Default Settings (Original PDU)
- firmware
Connecting PDUs to the Network- downloading new version
Update the PDU Metering Unit Firmware (SSH)
Update the PDU Metering Unit Firmware (HTML)
Update the PDU Metering Unit Firmware (Original PDU)
- information
View Module Information (Enhanced PDU)
View Module Information (Enhanced PDU)
View Module Information (Original PDU)
- update prompt
Update the PDU Metering Unit Firmware (HTML)
Update the PDU Metering Unit Firmware (Original PDU)
- updating
Update the PDU Metering Unit Firmware (HTML)
Update the PDU Metering Unit Firmware (Original PDU)
- version
View Status Information on the LCD Screen (Enhanced PDU)
View Status Information on the LCD Screen (Original PDU)
View Module Information (Original PDU)
G
- grounding strap
- attaching
- PDU
Attach a Grounding Strap
- disconnecting
- PDU
Remove a PDU
- location
- PDU
Attach a Grounding Strap
H
- HTML interface
- Admin/User fields
Add Users and Change Passwords (Enhanced PDU)
Add Users and Change Passwords (Original PDU)
- changing settings
Changing Interface Settings (Enhanced PDU)
Changing Interface Settings (Original PDU)
- Current Measurement page
Monitor an Original PDU (HTML Interface)
- factory-reset button
Restore the PDU to Factory Default Settings (Original PDU)
- Firmware-Update Filename checkbox
Update the PDU Metering Unit Firmware (HTML)
Update the PDU Metering Unit Firmware (Original PDU)
- HTTP enable checkbox
Enable and Configure SNMP (Enhanced PDU)
Enable and Configure SNMP (Original PDU)
- Login fields
Access a Metering Unit on the Network (Enhanced PDU)
Access a Metering Unit on the Network (Original PDU)
- module
- info page
View Module Information (Original PDU)
- information, viewing
View Module Information (Enhanced PDU)
View Module Information (Enhanced PDU)
View Module Information (Original PDU)
- name and location fields
Set the PDU Name and Location (Original PDU)
- monitoring current
Monitor the Enhanced PDU (SSH)
Monitor the Enhanced PDU (RS-232)
Monitor the Enhanced PDU (HTML Interface)
Monitor an Original PDU (HTML Interface)
- Net Configuration fields
Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
Connect an Original PDU to a Static IP Address Network
Connect an Original PDU to a DHCP Network
- NMS fields
Specify NMS Hosts (Original PDU)
- Param Configuration page
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
- SNMP Enable checkbox
Enable and Configure SNMP (Enhanced PDU)
Enable and Configure SNMP (Original PDU)
- SNMP settings
Enable and Configure SNMP (Original PDU)
- Syslog fields
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- Trap Host Setup fields
Enable and Configure SNMP (Enhanced PDU)
Enable and Configure SNMP (Original PDU)
- HTTP
- enabling through SNMP
Enable and Configure SNMP (Enhanced PDU)
Enable and Configure SNMP (Original PDU)
I
- ifconfig command
Configure an Oracle Solaris System for a Point-to-Point Connection
- incoming line to neutral voltage, measuring
Facility Power Requirements
- input lead cords
- connecting
Connect the PDU to the AC Power Source
- length
- PDU
PDU Physical Specifications
- metering unit relationship
Relationship Between Metering Unit Inputs and Outlet Groups on Three-Phase
PDUs
Metering Unit Inputs and Outlet Groups on Single-Phase PDUs
Relationship Between Metering Unit Modules and Outlet Groups on Three-Phase
PDUs
Relationship Between Metering Unit Modules and Outlet Groups on Single-Phase
PDUs
- module relationship
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- numbering
Relationship Between Metering Unit Inputs and Outlet Groups on Three-Phase
PDUs
Relationship Between Metering Unit Modules and Outlet Groups on Three-Phase
PDUs
Relationship Between Metering Unit Modules and Outlet Groups on Single-Phase
PDUs
- outlet group relationship
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- power source, disconnecting
Remove a PDU
- routing
- PDU
Install a PDU
- input relationship
- Relationship Between Inputs and Outlet Groups
Understanding the Relationship Between Inputs and Outlet Groups
- installation task overview (Standard PDU)
Task Installation Overview
- installing
- PDU
Tools
- IP address
View Status Information on the LCD Screen (Enhanced PDU)
View Status Information on the LCD Screen (Original PDU)
Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
Connect an Original PDU to a Static IP Address Network
Connect an Original PDU to a DHCP Network
J
- jumper cords
- avoiding overloading circuit
Connect Equipment Power Cords to PDUs
- disconnecting
Remove a PDU
- symmetrical load
Connect Equipment Power Cords to PDUs
L
- LCD screen
- background, changing
Adjust the LCD Screen (Enhanced PDU)
Adjust the LCD Screen (Original PDU)
- messages, understanding
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- module and outlet relationship
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- monitoring current
Monitor an Original PDU (LCD Screen)
- reading
Monitor the Enhanced PDU (LCD Screen)
Monitor an Original PDU (LCD Screen)
- resetting metering unit
Reset the Enhanced PDU Metering Unit (Reset Button)
Reset the PDU Metering Unit (Original PDU)
- rotating
Adjust the LCD Screen (Enhanced PDU)
Adjust the LCD Screen (Original PDU)
- status message
View Status Information on the LCD Screen (Enhanced PDU)
View Status Information on the LCD Screen (Original PDU)
- length
- PDU
PDU Physical Specifications
- lifting PDU
Install a PDU
- login prompt
- admin user
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Values (Enhanced PDU)
Login Information
- defined
Access a Metering Unit on the Network (Enhanced PDU)
Access a Metering Unit on the Network (Original PDU)
- users
Login Information
- low voltage
- PDU specifications
Confirming PDU Specifications
M
- MAC address
View Status Information on the LCD Screen (Enhanced PDU)
View Status Information on the LCD Screen (Original PDU)
View Module Information (Original PDU)
- messages
- SNMP traps
Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
Types of PDU Metering Unit SNMP Traps (Original PDU)
- syslog messages
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- understanding
Monitor the Enhanced PDU (HTML Interface)
Relationship Between Inputs and Outlet Groups Overview
Current and Voltage Measurement Colors
Relationship Between Modules and Outlet Groups Overview
- metering unit
- adding users
Add Users and Change Passwords (Enhanced PDU)
Add Users and Change Passwords (Original PDU)
- changing passwords
Add Users and Change Passwords (Enhanced PDU)
Add Users and Change Passwords (Original PDU)
- Current Measurement page
Connect an Original PDU to a DHCP Network
- Ethernet port
Connect an Enhanced PDU to a DHCP Network
Connect an Original PDU to a DHCP Network
- firmware
- information
View Module Information (Enhanced PDU)
View Module Information (Enhanced PDU)
View Module Information (Original PDU)
- updating
Update the PDU Metering Unit Firmware (HTML)
Update the PDU Metering Unit Firmware (Original PDU)
- HTML interface
Monitor the Enhanced PDU (SSH)
Monitor the Enhanced PDU (RS-232)
Monitor the Enhanced PDU (HTML Interface)
Monitor an Original PDU (HTML Interface)
- IP address
View Status Information on the LCD Screen (Enhanced PDU)
View Status Information on the LCD Screen (Original PDU)
- LCD screen
Monitor an Original PDU (LCD Screen)
- log into
Access a Metering Unit on the Network (Enhanced PDU)
Access a Metering Unit on the Network (Original PDU)
- login prompt
Access a Metering Unit on the Network (Enhanced PDU)
Access a Metering Unit on the Network (Original PDU)
- module
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- module and phase relationship
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- monitoring
Restore the PDU to Factory Default Settings (HTML)
Monitoring Enhanced PDUs
Restore the PDU to Factory Default Settings (Original PDU)
Monitoring Original PDUs
- incoming line to neutral voltage
Facility Power Requirements
- naming
Set the PDU Information (Enhanced PDU)
Set the PDU Name and Location (Original PDU)
- network access
Access a Metering Unit on the Network (Original PDU)
- network connection
- DHCP IP address
Connect an Enhanced PDU to a DHCP Network
Connect an Enhanced PDU to a DHCP Network
Connect an Original PDU to a DHCP Network
- introduced
Connecting PDUs to the Network
- static IP address
Prepare to Connect an Original PDU to a Static IP Address Network
- NMS hosts, setting
Specify NMS Hosts (Original PDU)
- outlet group
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- Param Configuration page
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
- phase
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- Reset button
Connect an Original PDU to a DHCP Network
- resetting
Reset the Enhanced PDU Metering Unit (Reset Button)
Reset the PDU Metering Unit (Original PDU)
- restore default settings
Restoring the PDU to Factory Default Settings (Enhanced PDU)
Restore the PDU to Factory Default Settings (Original PDU)
- SNMP
- configuring
Enabling and Configuring SNMP (Enhanced PDU)
Enabling and Configuring SNMP (Original PDU)
- enabling
Enabling and Configuring SNMP (Enhanced PDU)
Enabling and Configuring SNMP (Original PDU)
- traps
Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
Types of PDU Metering Unit SNMP Traps (Original PDU)
- static IP address network connection
Connect an Original PDU to a Static IP Address Network
- syslog messages
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- thresholds, setting
Set Threshold Parameter Levels (Original PDU)
- time, setting
Set the PDU System Time
- module
- alarms, setting
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
- defined
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- monitoring
Monitor the Enhanced PDU (HTML Interface)
Monitor an Original PDU (HTML Interface)
- parameters, setting
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
- relationship with phases and groups
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- Module Info page
View Module Information (Original PDU)
- Module Name & Location fields
Set the PDU Information (Enhanced PDU)
Set the PDU Name and Location (Original PDU)
- monitoring
Connecting PDUs to the Network- LCD screen
Monitor the Enhanced PDU (LCD Screen)
Monitor an Original PDU (LCD Screen)
- metering unit phase
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- module
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- network connection
- DHCP IP address
Connect an Enhanced PDU to a DHCP Network
Connect an Enhanced PDU to a DHCP Network
Connect an Original PDU to a DHCP Network
- establishing
Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
Connect an Enhanced PDU to a Static IP Address Network Through a SER MGT
Port
Connect an Original PDU to a Static IP Address Network
Connecting PDUs to the Network
- static IP address
Prepare to Connect an Original PDU to a Static IP Address Network
- phase
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
N
- naming PDU
Set the PDU Information (Enhanced PDU)
Set the PDU Name and Location (Original PDU)
- Net Configuration page
- Admin/User fields
Add Users and Change Passwords (Enhanced PDU)
Add Users and Change Passwords (Original PDU)
- enabling DHCP
Connect an Original PDU to a DHCP Network
- factory-reset button
Restore the PDU to Factory Default Settings (HTML)
Access the Event Logging Page
Set the PDU System Time
Reboot the Enhanced PDU Metering Unit (HTML)
Restore the PDU to Factory Default Settings (Original PDU)
- firmware-update
Update the PDU Metering Unit Firmware (HTML)
Update the PDU Metering Unit Firmware (Original PDU)
- HTTP Enable checkbox
Enable and Configure SNMP (Original PDU)
- module name & location
Set the PDU Information (Enhanced PDU)
Set the PDU Name and Location (Original PDU)
- NMS
Specify NMS Hosts (Original PDU)
- SNMP enable checkbox
Enable and Configure SNMP (Original PDU)
- static IP address network
Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
Connect an Original PDU to a Static IP Address Network
- syslog fields
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- trap host setup
Enable and Configure SNMP (Enhanced PDU)
Enable and Configure SNMP (Original PDU)
- network configuration
- DHCP
- disabling
Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
Connect an Original PDU to a Static IP Address Network
- enabling
Connect an Original PDU to a DHCP Network
- page
Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
Connect an Original PDU to a Static IP Address Network
Connect an Original PDU to a DHCP Network
- static IP address
Connect an Original PDU to a Static IP Address Network
- network connection
- DHCP
Connect an Enhanced PDU to a DHCP Network
Connect an Enhanced PDU to a DHCP Network
Connect an Original PDU to a DHCP Network
- establishing
Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
Connect an Enhanced PDU to a Static IP Address Network Through a SER MGT
Port
Connecting an Enhanced PDU to a Network
Connect an Original PDU to a Static IP Address Network
Connecting an Original PDU to a Network
- static IP address
Prepare to Connect an Original PDU to a Static IP Address Network
- network management station
Specify NMS Hosts (Original PDU)
- NMS hosts
Specify NMS Hosts (Original PDU)
O
- operating temperature range
Environmental Specifications
- Oracle Solaris system, point-to-point connection
Configure an Oracle Solaris System for a Point-to-Point Connection
- original PDU
- installing
Installing PDUs
- monitoring
Monitoring Original PDUs
- removing Refer to the service manuals of the equipment installed in the rack for the proper PDU replacement procedures, if applicable.
Remove a PDU
- specifications
PDU Physical Specifications
- out of balance
- alarm message
Current and Voltage Measurement Colors
Monitor an Original PDU (HTML Interface)
- description
Monitor the Enhanced PDU (HTML Interface)
Set Threshold Parameter Values (Enhanced PDU)
Current and Voltage Measurement Colors
Set Threshold Parameter Levels (Original PDU)
- parameter
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
Set Threshold Parameter Levels (Original PDU)
- SNMP trap
Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
Types of PDU Metering Unit SNMP Traps (Original PDU)
- outlet groups
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- incoming line to neutral voltage, measuring
Facility Power Requirements
- metering unit module relationship
- single-phase PDUs
Relationship Between Metering Unit Modules and Outlet Groups on Single-Phase
PDUs
- three-phase PDUs
Relationship Between Metering Unit Inputs and Outlet Groups on Three-Phase
PDUs
Relationship Between Metering Unit Modules and Outlet Groups on Three-Phase
PDUs
P
- Param Configuration page
Set Threshold Parameter Values (Enhanced PDU)
Add Users and Change Passwords (Original PDU)
Set Threshold Parameter Levels (Original PDU)
- parameter
- info low
Set Threshold Parameter Values (Enhanced PDU)
- Parameter Configuration page
Set Threshold Parameter Values (Enhanced PDU)
- parameters
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
Set Threshold Parameter Levels (Original PDU)
Set Threshold Parameter Levels (Original PDU)
- monitoring
Monitor an Original PDU (HTML Interface)
- out of balance
Set Threshold Parameter Levels (Original PDU)
- SNMP
Configure SNMP Traps
Enable and Configure SNMP (Enhanced PDU)
Enable and Configure SNMP (Original PDU)
- part number
View Module Information (Original PDU)
- Password field
Access a Metering Unit on the Network (Enhanced PDU)
Access a Metering Unit on the Network (Original PDU)
- passwords
- assigning
Add Users and Change Passwords (Enhanced PDU)
Add Users and Change Passwords (Original PDU)
- changing
Add Users and Change Passwords (Enhanced PDU)
Add Users and Change Passwords (Original PDU)
- patch cable
Connect an Enhanced PDU to a Static IP Address Network Through a DHCP-Capable
Network
Connect an Original PDU to a Static IP Address Network
Prepare to Connect an Original PDU to a Static IP Address Network
- PC, configuring point-to-point connection
Configure a Windows PC for a Point-to-Point Connection
- PDU
- antistatic strap, attaching
Prepare to Install a PDU
- date of manufacture
View Module Information (Original PDU)
- input lead cords
- connecting
Connect the PDU to the AC Power Source
- routing from PDU
Install a PDU
- jumper cords
- routing
Connect Equipment Power Cords to PDUs
- LCD screen
Administering the PDU Metering Unit (Enhanced PDU)
Administering the PDU Metering Unit (Original PDU)
- MAC address
View Status Information on the LCD Screen (Enhanced PDU)
View Status Information on the LCD Screen (Original PDU)
- monitoring
Restore the PDU to Factory Default Settings (HTML)
Monitoring Enhanced PDUs
Restore the PDU to Factory Default Settings (Original PDU)
Monitoring Original PDUs
- naming
Set the PDU Information (Enhanced PDU)
Set the PDU Name and Location (Original PDU)
- network connection
- DHCP IP address
Connect an Enhanced PDU to a DHCP Network
Connect an Original PDU to a DHCP Network
- establishing
Connecting PDUs to the Network
- static IP address
Prepare to Connect an Original PDU to a Static IP Address Network
- part number
View Module Information (Original PDU)
- resetting
Reset the Enhanced PDU Metering Unit (Reset Button)
Reset the PDU Metering Unit (Original PDU)
- restore default settings
Restoring the PDU to Factory Default Settings (Enhanced PDU)
Restore the PDU to Factory Default Settings (Original PDU)
- safety notices
Safety Notices
- serial number
View Module Information (Original PDU)
- shipping screws, removing from PDU
Remove a PDU
- standard
- cable mounting brackets
Install a PDU
- grounding strap, attaching
Attach a Grounding Strap
- installing
Tools
- lifting
Install a PDU
- low-voltage
Confirming PDU Specifications
- mounting brackets
Prepare to Install a PDU
- removing for service
Remove a PDU
- tie-wraps, securing to cable routing bracket
Install a PDU
- phase
- alarms, setting
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
- defined
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- metering unit group relationship
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- metering unit module relationship
Relationship Between Inputs and Outlet Groups Overview
Relationship Between Modules and Outlet Groups Overview
- thresholds, setting
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
- pinouts, SER MGT port
SER MGT Ports and Pin Descriptions
- point-to-point connection
- crossover cable diagram
Crossover Cable Pinout Diagram
- Oracle Solaris system, configuring
Configure an Oracle Solaris System for a Point-to-Point Connection
- PC, configuring
Configure a Windows PC for a Point-to-Point Connection
- port, Ethernet
Connect an Enhanced PDU to a DHCP Network
Connect an Original PDU to a DHCP Network
- power distribution unit See
PDU
- power input lead cords See
input lead cords
- PreWarningHigh-Trap description
Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
R
- requirements
- circuit breaker capacity, facility
Circuit Breaker Capacity and Characteristics
- facility power
Facility Power Requirements
- grounding
Grounding Requirements
- reset button
- cycling through modules
Monitor the Enhanced PDU (LCD Screen)
Monitor an Original PDU (LCD Screen)
- powering on PDU
Connect an Original PDU to a DHCP Network
- resetting metering unit
Reset the Enhanced PDU Metering Unit (Reset Button)
Reset the PDU Metering Unit (Original PDU)
- resetting
- circuit breakers
Circuit Breaker Overview
- metering unit
Reset the Enhanced PDU Metering Unit (Reset Button)
Reset the PDU Metering Unit (Original PDU)
- restore default settings
Restoring the PDU to Factory Default Settings (Enhanced PDU)
Restore the PDU to Factory Default Settings (Original PDU)
- ReturnToNormal-Trapdescription
Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
Types of PDU Metering Unit SNMP Traps (Original PDU)
- routing input lead cords
- PDU
Install a PDU
S
- safety notices
Safety Notices
- SER MGT port pinouts
SER MGT Ports and Pin Descriptions
- serial number
View Module Information (Original PDU)
- service
- circuit breakers, resetting
Circuit Breaker Overview
- shipping screws
- PDU
- installing
Install a PDU
- removing
Remove a PDU
- SNMP
- community name
Specify NMS Hosts (Original PDU)
Enable and Configure SNMP (Original PDU)
- disabling
Configure SNMP Traps
Enable and Configure SNMP (Enhanced PDU)
Enable and Configure SNMP (Original PDU)
- Enable checkbox
Enable and Configure SNMP (Original PDU)
- enabling
Configure SNMP Traps
Enable and Configure SNMP (Enhanced PDU)
Enable and Configure SNMP (Original PDU)
- enabling per module
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
- host IP addresses
Enable and Configure SNMP (Original PDU)
- host setup
Enable and Configure SNMP (Enhanced PDU)
Enable and Configure SNMP (Original PDU)
- NMS hosts, setting
Specify NMS Hosts (Original PDU)
- parameter settings
Configure SNMP Traps
Enable and Configure SNMP (Enhanced PDU)
Enable and Configure SNMP (Original PDU)
- setting trap values
Configure SNMP Traps
Enable and Configure SNMP (Original PDU)
- trap descriptions
Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
Types of PDU Metering Unit SNMP Traps (Original PDU)
- trap host setup
Enable and Configure SNMP (Original PDU)
- specifications
- environmental
Environmental Specifications
- static IP address
- network configuration
Connect an Original PDU to a Static IP Address Network
- network connection
Prepare to Connect an Original PDU to a Static IP Address Network
- syslog
- Enable checkbox
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- messages
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- enabling
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- example
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- setting parameters
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- setting time between messages
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- system log
- Alarms checkbox
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- messages
- enabling
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- example
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
- parameters, setting
Send System Log Messages to Systems on the Network (Original PDU)
- time between messages, setting
Send System Log Messages to Systems on the Network (Enhanced PDU)
Send System Log Messages to Systems on the Network (Original PDU)
T
- temperature, operating range
Environmental Specifications
- thresholds, setting
Set Threshold Parameter Values (Enhanced PDU)
Set Threshold Parameter Levels (Original PDU)
- tie-wraps
Install a PDU
- time, setting
Set the PDU System Time
- tools, assembling
Tools
- traps
- described
Types of PDU Metering Unit SNMP Traps (Enhanced PDU)
Types of PDU Metering Unit SNMP Traps (Original PDU)
- KeepAlive trap
Configure SNMP Traps
Enable and Configure SNMP (Original PDU)
- setting
Configure SNMP Traps
Enable and Configure SNMP (Original PDU)
- trap host setup
Enable and Configure SNMP (Original PDU)
U
- unpacking
- PDU
Prepare to Install a PDU
- users
- adding
Add Users and Change Passwords (Enhanced PDU)
Add Users and Change Passwords (Original PDU)
Add Users and Change Passwords (Original PDU)
- changing passwords
Add Users and Change Passwords (Original PDU)
- login field
Access a Metering Unit on the Network (Enhanced PDU)
Access a Metering Unit on the Network (Original PDU)
W
- weight
- PDU
PDU Physical Specifications
- width
- PDU
PDU Physical Specifications