Go to main content
oracle home
Oracle
®
ZFS Storage ZS5-ES Service Manual, Release OS8.6.x
Exit Print View
Search Term
Search Scope:
This Document
Entire Library
» ...
Documentation Home
»
Oracle ZFS Storage ZS5-ES Documentation ...
»
Oracle
®
ZFS Storage ZS5-ES ...
»
Returning the Controller to Operation
»
Remove Antistatic Measures
Updated: March 2017
Oracle
®
ZFS Storage ZS5-ES Service Manual, Release OS8.6.x
Document Information
About Oracle ZFS Storage ZS5-ES
Product Description
About Controls and Connectors
Front Panel Controls and Indicators
Controller Back Panel View
About Controller Components
Illustrated Parts Breakdown
Customer-Replaceable Units
Field-Replaceable Units
Controller Internal Cables
Preparing for Service
Safety Precautions
Safety Symbols
Electrostatic Discharge Safety
FRU Key Identity Properties Automated Update
Related Information
Required Tools
Preparing the Controller for Component Replacement
Powering Off the Controller
Disconnect Cables From the Controller
Extend the Controller to the Maintenance Position
Remove the Controller From the Rack
Take Antistatic Measures
Open the Controller Fan Door
Remove the Controller Top Cover
Servicing CRUs That Do Not Require Controller Power-Off
Servicing Storage Drives (CRU)
Storage Drives Hot-Plug Conditions
Storage Drive Locations and Numbering
Storage Drive Status Indicators
Removing and Replacing a HDD or SSD Storage Drive
Remove a HDD or SSD Storage Drive
Install a HDD or SSD Storage Drive
Servicing Fan Modules (CRU)
Remove a Fan Module
Install a Fan Module
Servicing Power Supplies (CRU)
Power Supply Status Indicators
Remove a Power Supply
Install a Power Supply
Servicing CRUs That Require Controller Power-Off
Servicing the DIMMs (CRU)
DIMM and Processor Physical Layout
Inconsistencies Between DIMM Fault Indicators and the BIOS Isolation of Failed DIMMs
Using the Controller Fault Remind Button
Identify and Remove the Failed DIMM
Install a DIMM
Servicing PCIe Risers (CRU)
PCIe Riser Location and Differences
Remove a PCIe Riser From PCIe Slot 1 or 2
Install a PCIe Riser Into PCIe Slot 1 or 2
Remove the PCIe Riser From PCIe Slots 3 and 4
Install the PCIe Riser Into PCIe Slots 3 and 4
Servicing PCIe Cards (CRU)
PCIe Slot Characteristics
Remove a PCIe Card From PCIe Slot 1 or 2
Install a PCIe Card in PCIe Slot 1 or 2
Remove a PCIe Card From PCIe Slot 3
Install a PCIe Card in PCIe Slot 3
Servicing the Battery (CRU)
Remove the Battery
Install the Battery
Servicing FRUs
Servicing Processors (FRU)
Selecting the Correct Processor Removal and Replacement Tool
Remove a Processor
Install a Processor
Servicing the Internal HBA Card (FRU)
Remove the Internal HBA Card From PCIe Slot 4
Install the Internal HBA Card in PCIe Slot 4
Servicing the Disk Backplane (FRU)
Remove the Disk Backplane
Install the Disk Backplane
Servicing the Front Indicator Module (FRU)
Remove the Front Indicator Module
Install the Front Indicator Module
Servicing the Motherboard (FRU)
Prepare the Motherboard for Service
Remove the Motherboard
Install the Motherboard
Restore the Original SP Settings
Configure the BIOS Settings
Resync the SP Password with the Host
Servicing the Internal HBA SAS Cable Assembly
Remove the Internal HBA SAS Cable Assembly
Install the Internal HBA SAS Cable Assembly
Servicing the Power, FIM, and Disk Backplane Data Cables
Removing the Power, FIM, and Disk Backplane Data Cables
Install the Power, FIM, and Disk Backplane Data Cables
Returning the Controller to Operation
Installing Controller Filler Panels
Install Filler Panels
Install the Controller Top Cover
Remove Antistatic Measures
Reinstall the Controller Into the Rack
Return the Controller to the Normal Rack Position
Reconnect Data Cables and Power Cords
Power On the Controller
Language:
English
Remove Antistatic Measures
Remove any antistatic straps or conductors from the controller chassis.
Remove the antistatic wrist strap from yourself.
Previous
Next