Remove the Disk Cage Cover From the Server
Before you service the server's storage drive backplane, you should first remove
the server's disk cage cover.
Note -
This procedure is only required for systems configured with eight 2.5-inch
storage drives. If your system is configured with twelve 3.5-inch storage drives
or twenty-four 2.5-inch storage drives, see
Remove the Fan Assembly Door From the Server.
-
Ensure that the AC power cords are disconnected from the server power
supplies.
-
Using a No. 2 Phillips screwdriver, remove the twelve screws (three on each top
side of the chassis, and three on each side of the chassis) that secure the disk
cage cover [1].
-
Slide the cover forward and lift to remove the disk cage cover from the chassis
[2].