Navigate BIOS Setup Utility Menus
To navigate the menus or options listed on a menu, use the arrow keys. The
currently selected option or sub-menu is highlighted. For further instructions on how
to navigate and change settings in the BIOS Setup Utility, refer to the online
information provided on the menu.
Access the BIOS Setup Utility.
See Access BIOS Setup Utility Menus.
Use the left and right arrow keys to select the different primary menu
As you select each menu option, the top-level screen for that menu option
To navigate options presented on a top-level screen, use the up and down arrow
Only options that can be modified are highlighted when you press the up and
down arrow keys.
If an option can be modified, as you select the option, user instructions
for modifying the option appear in the right column of the screen.
If an option is a link to a sub-screen, a description of the sub-menu
content appears in the right column.
Modify an option by pressing the + or - keys (plus or minus keys) or by
pressing Enter and selecting the desired option from the pop-up menus.
Press the Esc key to return from a sub-menu screen to the previous menu
Pressing Esc from a top-level menu is equivalent to selecting the Discard
Changes and Exit option from the Save & Exit Menu.
Modify parameters as needed.
Press the F10 key to save your changes and exit the BIOS Setup Utility.
Alternatively, you can select the Save & Exit Menu, and then select the
Save Changes and Reset to save your changes and exit the
BIOS Setup Utility.
After modifying any BIOS settings and selecting Save Changes and
Reset from the Save & Exit Menu, the subsequent reboot might
take longer than a typical reboot where no settings were modified. The
additional delay is required to ensure that changes to the BIOS settings are
synchronized with Oracle ILOM.