Verify the SCC PROM

Language:

Verify that the banner display includes an Ethernet address and a Host ID value.
The Ethernet address and Host ID values are read from the SCC PROM. Their presence in the banner verifies that the SPM and the host can read the SCC PROM.
```
SPARC T8-4, No Keyboard
.
OpenBoot X.XX, 16256 MB memory available, Serial 
#87304604.Ethernet address *:**:**:**:**:**, Host ID: ********
```

For additional verification, run specific commands to display data stored in the SCC PROM.

Use the Oracle ILOM show command to display the MAC address:

-> show /HOST macaddress
  /HOST
    Properties:
    macaddress = **:**:**:**:**:**

Use Oracle Solaris OS commands to display the hostid and Ethernet address:

# hostid
8534299c
 
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 
index 1
        inet 127.0.0.1 netmask ff000000
igb0: flags=201004843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 10.6.88.150 netmask fffffe00 broadcast 10.6.89.255
        ether *:**:**:**:**:**