Go to main content

man pages section 5: File Formats

Exit Print View

Updated: Wednesday, February 9, 2022
 
 

hgrc-51 (5)

Name

hgrc-51 - configuration files for Mercurial

Synopsis

Please see following description for synopsis

Description

HGRC(5)                        Mercurial Manual                        HGRC(5)



NAME
       hgrc - configuration files for Mercurial

DESCRIPTION
       The  Mercurial  system  uses  a  set  of configuration files to control
       aspects of its behavior.

TROUBLESHOOTING
       If you're having problems with your configuration,  hg  config  --debug
       can  help  you understand what is introducing a setting into your envi-
       ronment.

       See hg help config.syntax and  hg  help  config.files  for  information
       about how and where to override things.

STRUCTURE
       The  configuration  files use a simple ini-file format. A configuration
       file consists of sections, led by a [section] header  and  followed  by
       name = value entries:

       [ui]
       username = Firstname Lastname <firstname.lastname@example.net>
       verbose = True

       The  above  entries  will be referred to as ui.username and ui.verbose,
       respectively. See hg help config.syntax.

FILES
       Mercurial reads configuration data from several files, if  they  exist.
       These  files  do  not  exist by default and you will have to create the
       appropriate configuration files yourself:

       Local configuration is  put  into  the  per-repository  <repo>/.hg/hgrc
       file.

       Global configuration like the username setting is typically put into:

       o $HOME/.hgrc (on Unix, Plan9)

       The  names  of  these  files depend on the system on which Mercurial is
       installed. *.rc files from a single directory are read in  alphabetical
       order,  later  ones  overriding  earlier ones. Where multiple paths are
       given below, settings from earlier paths override later ones.

       The following files are consulted:

       o <repo>/.hg/hgrc (per-repository)

       o $HOME/.hgrc (per-user)

       o ${XDG_CONFIG_HOME:-$HOME/.config}/hg/hgrc (per-user)

       o <install-root>/etc/mercurial/hgrc (per-installation)

       o <install-root>/etc/mercurial/hgrc.d/*.rc (per-installation)

       o /etc/mercurial/hgrc (per-system)

       o /etc/mercurial/hgrc.d/*.rc (per-system)

       o <internal>/default.d/*.rc (defaults)

       Per-repository configuration options only apply in a particular reposi-
       tory. This file is not version-controlled, and will not get transferred
       during a "clone" operation. Options in this file  override  options  in
       all other configuration files.

       On  Unix,  most  of this file will be ignored if it doesn't belong to a
       trusted user or to a trusted group. See hg help config.trusted for more
       details.

       Per-user  configuration  file(s)  are  for  the user running Mercurial.
       Options in these files apply to all Mercurial commands executed by this
       user  in  any directory. Options in these files override per-system and
       per-installation options.

       Per-installation configuration files are searched for in the  directory
       where Mercurial is installed. <install-root> is the parent directory of
       the hg executable (or symlink) being run.

       For example, if installed in /shared/tools/bin/hg, Mercurial will  look
       in  /shared/tools/etc/mercurial/hgrc.  Options  in these files apply to
       all Mercurial commands executed by any user in any directory.

       Per-installation configuration files are for the system on which Mercu-
       rial is running. Options in these files apply to all Mercurial commands
       executed by any user in any directory.  Mercurial checks each of  these
       locations  in the specified order until one or more configuration files
       are detected.

       Per-system configuration files are for the system on which Mercurial is
       running.  Options  in  these files apply to all Mercurial commands exe-
       cuted by any user in any directory. Options  in  these  files  override
       per-installation options.

       Mercurial comes with some default configuration. The default configura-
       tion files are installed with Mercurial  and  will  be  overwritten  on
       upgrades.  Default  configuration files should never be edited by users
       or administrators but can be overridden in other  configuration  files.
       So  far  the directory only contains merge tool configuration but pack-
       agers can also put other default configuration there.

SYNTAX
       A configuration file consists of sections, led by  a  [section]  header
       and  followed  by  name = value entries (sometimes called configuration
       keys):

       [spam]
       eggs=ham
       green=
          eggs

       Each line contains one entry. If the lines that  follow  are  indented,
       they  are treated as continuations of that entry. Leading whitespace is
       removed from values. Empty lines are skipped. Lines beginning with # or
       ; are ignored and may be used to provide comments.

       Configuration  keys  can be set multiple times, in which case Mercurial
       will use the value that was configured last. As an example:

       [spam]
       eggs=large
       ham=serrano
       eggs=small

       This would set the configuration key named eggs to small.

       It is also possible to define a section multiple times. A  section  can
       be  redefined  on the same and/or on different configuration files. For
       example:

       [foo]
       eggs=large
       ham=serrano
       eggs=small

       [bar]
       eggs=ham
       green=
          eggs

       [foo]
       ham=prosciutto
       eggs=medium
       bread=toasted

       This would set the eggs, ham, and bread configuration keys of  the  foo
       section  to  medium,  prosciutto, and toasted, respectively. As you can
       see there only thing that matters is the last value that  was  set  for
       each of the configuration keys.

       If a configuration key is set multiple times in different configuration
       files the final value will depend on the order in which  the  different
       configuration files are read, with settings from earlier paths overrid-
       ing later ones as described on the Files section above.

       A line of the form %include file will include  file  into  the  current
       configuration  file.  The  inclusion  is  recursive,  which  means that
       included files can include other files. Filenames are relative  to  the
       configuration  file in which the %include directive is found.  Environ-
       ment variables and ~user constructs are expanded in file. This lets you
       do something like:

       %include ~/.hgrc.d/$HOST.rc

       to include a different configuration file on each computer you use.

       A  line  with %unset name will remove name from the current section, if
       it has been set previously.

       The values are either free-form text strings, lists of text strings, or
       Boolean  values.  Boolean  values  can be set to true using any of "1",
       "yes", "true", or "on" and to false using "0", "no", "false", or  "off"
       (all case insensitive).

       List  values  are  separated by whitespace or comma, except when values
       are placed in double quotation marks:

       allow_read = "John Doe, PhD", brian, betty

       Quotation marks can be escaped by prefixing them with a backslash. Only
       quotation  marks  at  the beginning of a word is counted as a quotation
       (e.g., foo"bar baz is the list of foo"bar and baz).

SECTIONS
       This section describes the different sections that may appear in a Mer-
       curial  configuration  file,  the purpose of each section, its possible
       keys, and their possible values.

   alias
       Defines command aliases.

       Aliases allow you to define your own commands in terms  of  other  com-
       mands  (or  aliases),  optionally including arguments. Positional argu-
       ments in the form of $1, $2, etc. in the alias definition are  expanded
       by Mercurial before execution. Positional arguments not already used by
       $N in the definition are put at the end of the command to be executed.

       Alias definitions consist of lines of the form:

       <alias> = <command> [<argument>]...

       For example, this definition:

       latest = log --limit 5

       creates a new command latest that  shows  only  the  five  most  recent
       changesets. You can define subsequent aliases using earlier ones:

       stable5 = latest -b stable

       Note   It is possible to create aliases with the same names as existing
              commands, which will then  override  the  original  definitions.
              This is almost always a bad idea!

       An  alias  can  start  with an exclamation point (!) to make it a shell
       alias. A shell alias is executed with the shell and will  let  you  run
       arbitrary commands. As an example,

       echo = !echo $@

       will  let  you  do  hg echo foo to have foo printed in your terminal. A
       better example might be:

       purge = !$HG status --no-status --unknown -0 re: | xargs -0 rm -f

       which will make hg purge delete all unknown files in the repository  in
       the same manner as the purge extension.

       Positional  arguments  like $1, $2, etc. in the alias definition expand
       to the command arguments. Unmatched arguments are removed.  $0  expands
       to the alias name and $@ expands to all arguments separated by a space.
       "$@" (with quotes) expands to all  arguments  quoted  individually  and
       separated  by  a  space.  These expansions happen before the command is
       passed to the shell.

       Shell aliases are executed in an environment where $HG expands  to  the
       path  of the Mercurial that was used to execute the alias. This is use-
       ful when you want to call further Mercurial commands in a shell  alias,
       as was done above for the purge alias. In addition, $HG_ARGS expands to
       the arguments given to Mercurial.  In  the  hg  echo  foo  call  above,
       $HG_ARGS would expand to echo foo.

       Note   Some  global  configuration  options  such  as  -R are processed
              before shell aliases and will thus not be passed to aliases.

   annotate
       Settings used when displaying file annotations. All values are Booleans
       and  default  to False. See hg help config.diff for related options for
       the diff command.

       ignorews

              Ignore white space when comparing lines.

       ignorewseol

              Ignore white space at the end of a line when comparing lines.

       ignorewsamount

              Ignore changes in the amount of white space.

       ignoreblanklines

              Ignore changes whose lines are all blank.

   auth
       Authentication credentials and other authentication-like  configuration
       for  HTTP  connections.  This section allows you to store usernames and
       passwords for use when logging into HTTP  servers.  See  hg  help  con-
       fig.web if you want to configure who can login to your HTTP server.

       The following options apply to all hosts.

       cookiefile

              Path  to a file containing HTTP cookie lines. Cookies matching a
              host will be sent automatically.

              The file format  uses  the  Mozilla  cookies.txt  format,  which
              defines  cookies on their own lines. Each line contains 7 fields
              delimited by the tab character (domain, is_domain_cookie,  path,
              is_secure,  expires, name, value). For more info, do an Internet
              search for "Netscape cookies.txt format."

              Note: the  cookies  parser  does  not  handle  port  numbers  on
              domains.  You  will need to remove ports from the domain for the
              cookie to be recognized.  This could result in  a  cookie  being
              disclosed to an unwanted server.

              The cookies file is read-only.

       Other  options in this section are grouped by name and have the follow-
       ing format:

       <name>.<argument> = <value>

       where <name> is used to group arguments  into  authentication  entries.
       Example:

       foo.prefix = hg.intevation.de/mercurial
       foo.username = foo
       foo.password = bar
       foo.schemes = http https

       bar.prefix = secure.example.org
       bar.key = path/to/file.key
       bar.cert = path/to/file.cert
       bar.schemes = https

       Supported arguments:

       prefix

              Either  *  or a URI prefix with or without the scheme part.  The
              authentication entry with the longest matching  prefix  is  used
              (where  * matches everything and counts as a match of length 1).
              If the prefix doesn't include a scheme, the match  is  performed
              against  the  URI  with  its  scheme  stripped  as well, and the
              schemes argument, q.v., is then subsequently consulted.

       username

              Optional. Username to authenticate with. If not given,  and  the
              remote  site  requires  basic or digest authentication, the user
              will be prompted for it. Environment variables are  expanded  in
              the  username  letting  you  do foo.username = $USER. If the URI
              includes a username, only [auth] entries with a  matching  user-
              name or without a username will be considered.

       password

              Optional.  Password  to authenticate with. If not given, and the
              remote site requires basic or digest  authentication,  the  user
              will be prompted for it.

       key

              Optional.  PEM  encoded client certificate key file. Environment
              variables are expanded in the filename.

       cert

              Optional. PEM encoded client certificate chain file. Environment
              variables are expanded in the filename.

       schemes

              Optional.  Space  separated  list  of  URI  schemes  to use this
              authentication entry with.  Only  used  if  the  prefix  doesn't
              include  a  scheme.  Supported  schemes are http and https. They
              will match static-http and static-https respectively,  as  well.
              (default: https)

       If  no suitable authentication entry is found, the user is prompted for
       credentials as usual if required by the remote.

   color
       Configure the Mercurial color mode. For details  about  how  to  define
       your custom effect and style see hg help color.

       mode

              String:  control  the  method used to output color. One of auto,
              ansi, win32, terminfo or debug. In auto mode, Mercurial will use
              ANSI  mode  by default (or win32 mode prior to Windows 10) if it
              detects a terminal. Any invalid value will disable color.

       pagermode

              String: optional override of color.mode used with pager.

              On some systems, terminfo mode may  cause  problems  when  using
              color  with  less -R as a pager program. less with the -R option
              will only display ECMA-48 color codes,  and  terminfo  mode  may
              sometimes  emit codes that less doesn't understand. You can work
              around this by either using ansi mode  (or  auto  mode),  or  by
              using  less  -r  (which  will  pass through all terminal control
              codes, not just color control codes).

              On some systems (such as MSYS in Windows), the terminal may sup-
              port a different color mode than the pager program.

   commands
       commit.post-status

              Show  status  of files in the working directory after successful
              commit.  (default: False)

       resolve.confirm

              Confirm before performing  action  if  no  filename  is  passed.
              (default: False)

       resolve.explicit-re-merge

              Require  uses  of  hg  resolve to specify which action it should
              perform, instead of  re-merging  files  by  default.   (default:
              False)

       resolve.mark-check

              Determines what level of checking hg resolve --mark will perform
              before marking  files  as  resolved.  Valid  values  are  none`,
              ``warn,  and  abort.  warn  will  output  a  warning listing the
              file(s) that still have conflict markers in them, but will still
              mark  everything  resolved.   abort will output the same warning
              but will not mark things as resolved.  If --all  is  passed  and
              this  is  set  to  abort, only a warning will be shown (an error
              will not be raised).  (default: none)

       status.relative

              Make paths in hg status output relative to  the  current  direc-
              tory.  (default: False)

       status.terse

              Default  value for the --terse flag, which condenses status out-
              put.  (default: empty)

       update.check

              Determines what level of checking hg update will perform  before
              moving  to a destination revision. Valid values are abort, none,
              linear, and noconflict. abort always fails if the working direc-
              tory has uncommitted changes. none performs no checking, and may
              result in a merge with uncommitted changes.  linear  allows  any
              update  as  long  as  it follows a straight line in the revision
              history, and may  trigger  a  merge  with  uncommitted  changes.
              noconflict will allow any update which would not trigger a merge
              with uncommitted changes, if any are present.  (default: linear)

       update.requiredest

              Require that the user pass a destination when running hg update.
              For  example,  hg  update  .::  will  be allowed, but a plain hg
              update will be disallowed.  (default: False)

   committemplate
       changeset

              String: configuration in this section is used as the template to
              customize the text shown in the editor when committing.

       In  addition  to pre-defined template keywords, commit log specific one
       below can be used for customization:

       extramsg

              String: Extra message (typically 'Leave message empty  to  abort
              commit.'). This may be changed by some commands or extensions.

       For example, the template configuration below shows as same text as one
       shown by default:

       [committemplate]
       changeset = {desc}\n\n
           HG: Enter commit message.  Lines beginning with 'HG:' are removed.
           HG: {extramsg}
           HG: --
           HG: user: {author}\n{ifeq(p2rev, "-1", "",
          "HG: branch merge\n")
          }HG: branch '{branch}'\n{if(activebookmark,
          "HG: bookmark '{activebookmark}'\n")   }{subrepos %
          "HG: subrepo {subrepo}\n"              }{file_adds %
          "HG: added {file}\n"                   }{file_mods %
          "HG: changed {file}\n"                 }{file_dels %
          "HG: removed {file}\n"                 }{if(files, "",
          "HG: no files changed\n")}

       diff()

              String: show the diff (see hg help templates for detail)

       Sometimes it is helpful to show the diff of the changeset in the editor
       without having to prefix 'HG: ' to each line so that highlighting works
       correctly. For this, Mercurial provides a  special  string  which  will
       ignore everything below it:

       HG: ------------------------ >8 ------------------------

       For  example, the template configuration below will show the diff below
       the extra message:

       [committemplate]
       changeset = {desc}\n\n
           HG: Enter commit message.  Lines beginning with 'HG:' are removed.
           HG: {extramsg}
           HG: ------------------------ >8 ------------------------
           HG: Do not touch the line above.
           HG: Everything below will be removed.
           {diff()}

       Note   For some  problematic  encodings  (see  hg  help  win32mbcs  for
              detail),  this  customization should be configured carefully, to
              avoid showing broken characters.

              For example, if a  multibyte  character  ending  with  backslash
              (0x5c)  is followed by the ASCII character 'n' in the customized
              template, the sequence  of  backslash  and  'n'  is  treated  as
              line-feed  unexpectedly  (and the multibyte character is broken,
              too).

       Customized  template  is  used  for  commands  below  (--edit  may   be
       required):

       o hg backout

       o hg commit

       o hg fetch (for merge commit only)

       o hg graft

       o hg histedit

       o hg import

       o hg qfold, hg qnew and hg qrefresh

       o hg rebase

       o hg shelve

       o hg sign

       o hg tag

       o hg transplant

       Configuring  items below instead of changeset allows showing customized
       message only for specific actions, or showing  different  messages  for
       each action.

       o changeset.backout for hg backout

       o changeset.commit.amend.merge for hg commit --amend on merges

       o changeset.commit.amend.normal for hg commit --amend on other

       o changeset.commit.normal.merge for hg commit on merges

       o changeset.commit.normal.normal for hg commit on other

       o changeset.fetch for hg fetch (impling merge commit)

       o changeset.gpg.sign for hg sign

       o changeset.graft for hg graft

       o changeset.histedit.edit for edit of hg histedit

       o changeset.histedit.fold for fold of hg histedit

       o changeset.histedit.mess for mess of hg histedit

       o changeset.histedit.pick for pick of hg histedit

       o changeset.import.bypass for hg import --bypass

       o changeset.import.normal.merge for hg import on merges

       o changeset.import.normal.normal for hg import on other

       o changeset.mq.qnew for hg qnew

       o changeset.mq.qfold for hg qfold

       o changeset.mq.qrefresh for hg qrefresh

       o changeset.rebase.collapse for hg rebase --collapse

       o changeset.rebase.merge for hg rebase on merges

       o changeset.rebase.normal for hg rebase on other

       o changeset.shelve.shelve for hg shelve

       o changeset.tag.add for hg tag without --remove

       o changeset.tag.remove for hg tag --remove

       o changeset.transplant.merge for hg transplant on merges

       o changeset.transplant.normal for hg transplant on other

       These  dot-separated  lists  of names are treated as hierarchical ones.
       For example, changeset.tag.remove customizes the  commit  message  only
       for  hg  tag  --remove, but changeset.tag customizes the commit message
       for hg tag regardless of --remove option.

       When the external editor is invoked for  a  commit,  the  corresponding
       dot-separated  list  of  names without the changeset. prefix (e.g. com-
       mit.normal.normal) is in the HGEDITFORM environment variable.

       In this section, items other than changeset can be referred  from  oth-
       ers.  For  example,  the configuration to list committed files up below
       can be referred as {listupfiles}:

       [committemplate]
       listupfiles = {file_adds %
          "HG: added {file}\n"     }{file_mods %
          "HG: changed {file}\n"   }{file_dels %
          "HG: removed {file}\n"   }{if(files, "",
          "HG: no files changed\n")}

   decode/encode
       Filters for transforming files on checkout/checkin.  This  would  typi-
       cally  be  used for newline processing or other localization/canonical-
       ization of files.

       Filters consist of a filter pattern followed by a filter command.  Fil-
       ter  patterns are globs by default, rooted at the repository root.  For
       example, to match any file ending in .txt in the root  directory  only,
       use  the  pattern *.txt. To match any file ending in .c anywhere in the
       repository, use the pattern **.c.  For each file only the first  match-
       ing filter applies.

       The  filter  command  can start with a specifier, either pipe: or temp-
       file:. If no specifier is given, pipe: is used by default.

       A pipe: command must accept data on stdin and  return  the  transformed
       data on stdout.

       Pipe example:

       [encode]
       # uncompress gzip files on checkin to improve delta compression
       # note: not necessarily a good idea, just an example
       *.gz = pipe: gunzip

       [decode]
       # recompress gzip files when writing them to the working dir (we
       # can safely omit "pipe:", because it's the default)
       *.gz = gzip

       A  tempfile:  command is a template. The string INFILE is replaced with
       the name of a temporary file that contains the data to be  filtered  by
       the  command.  The string OUTFILE is replaced with the name of an empty
       temporary file, where the filtered data must be written by the command.

       This filter mechanism is used internally by the eol extension to trans-
       late  line  ending characters between Windows (CRLF) and Unix (LF) for-
       mat. We suggest you use the eol extension for convenience.

   defaults
       (defaults are deprecated. Don't use them. Use aliases instead.)

       Use the [defaults] section to define command defaults, i.e. the default
       options/arguments to pass to the specified commands.

       The  following  example makes hg log run in verbose mode, and hg status
       show only the modified files, by default:

       [defaults]
       log = -v
       status = -m

       The actual commands, instead of their aliases, must be used when defin-
       ing  command defaults. The command defaults will also be applied to the
       aliases of the commands defined.

   diff
       Settings used when displaying diffs. Everything except for unified is a
       Boolean  and defaults to False. See hg help config.annotate for related
       options for the annotate command.

       git

              Use git extended diff format.

       nobinary

              Omit git binary patches.

       nodates

              Don't include dates in diff headers.

       noprefix

              Omit 'a/' and 'b/' prefixes from  filenames.  Ignored  in  plain
              mode.

       showfunc

              Show which function each change is in.

       ignorews

              Ignore white space when comparing lines.

       ignorewsamount

              Ignore changes in the amount of white space.

       ignoreblanklines

              Ignore changes whose lines are all blank.

       unified

              Number of lines of context to show.

       word-diff

              Highlight changed words.

   email
       Settings for extensions that send email messages.

       from

              Optional.  Email  address to use in "From" header and SMTP enve-
              lope of outgoing messages.

       to

              Optional. Comma-separated list of recipients' email addresses.

       cc

              Optional. Comma-separated list of carbon copy recipients'  email
              addresses.

       bcc

              Optional.  Comma-separated list of blind carbon copy recipients'
              email addresses.

       method

              Optional. Method to use to send email messages. If value is smtp
              (default),  use SMTP (see the [smtp] section for configuration).
              Otherwise, use as name of program to run that acts like sendmail
              (takes -f option for sender, list of recipients on command line,
              message  on  stdin).  Normally,  setting  this  to  sendmail  or
              /usr/sbin/sendmail is enough to use sendmail to send messages.

       charsets

              Optional. Comma-separated list of character sets considered con-
              venient for recipients. Addresses, headers, and parts  not  con-
              taining  patches  of  outgoing  messages  will be encoded in the
              first character set to  which  conversion  from  local  encoding
              ($HGENCODING,  ui.fallbackencoding) succeeds. If correct conver-
              sion fails, the text in question is sent as is.  (default: '')

              Order of outgoing email character sets:

              1. us-ascii: always first, regardless of settings

              2. email.charsets: in order given by user

              3. ui.fallbackencoding: if not in email.charsets

              4. $HGENCODING: if not in email.charsets

              5. utf-8: always last, regardless of settings

       Email example:

       [email]
       from = Joseph User <joe.user@example.com>
       method = /usr/sbin/sendmail
       # charsets for western Europeans
       # us-ascii, utf-8 omitted, as they are tried first and last
       charsets = iso-8859-1, iso-8859-15, windows-1252

   extensions
       Mercurial has an extension mechanism for adding new features. To enable
       an extension, create an entry for it in this section.

       If  you know that the extension is already in Python's search path, you
       can give the name of the module, followed by =, with nothing after  the
       =.

       Otherwise,  give a name that you choose, followed by =, followed by the
       path to the .py file (including the file name extension)  that  defines
       the extension.

       To  explicitly  disable  an  extension  that  is  enabled in an hgrc of
       broader scope, prepend its path with !, as in foo = !/ext/path or foo =
       ! when path is not supplied.

       Example for ~/.hgrc:

       [extensions]
       # (the churn extension will get loaded from Mercurial's path)
       churn =
       # (this extension will get loaded from the file specified)
       myfeature = ~/.hgext/myfeature.py

   format
       Configuration that controls the repository format. Newer format options
       are more powerful but incompatible with some older versions  of  Mercu-
       rial.  Format options are considered at repository initialization only.
       You need to make a new  clone  for  config  change  to  be  taken  into
       account.

       For more details about repository format and version compatibility, see
       https://www.mercurial-scm.org/wiki/MissingRequirement

       usegeneraldelta

              Enable or disable the  "generaldelta"  repository  format  which
              improves  repository  compression  by allowing "revlog" to store
              delta against arbitrary revision instead of the previous  stored
              one. This provides significant improvement for repositories with
              branches.

              Repositories with this on-disk format require Mercurial  version
              1.9.

              Enabled by default.

       dotencode

              Enable  or  disable  the  "dotencode"  repository  format  which
              enhances the  "fncache"  repository  format  (which  has  to  be
              enabled  to use dotencode) to avoid issues with filenames start-
              ing with ._ on Mac OS X and spaces on Windows.

              Repositories with this on-disk format require Mercurial  version
              1.7.

              Enabled by default.

       usefncache

              Enable or disable the "fncache" repository format which enhances
              the "store" repository format (which has to be  enabled  to  use
              fncache)  to  allow  longer  filenames  and avoids using Windows
              reserved names, e.g. "nul".

              Repositories with this on-disk format require Mercurial  version
              1.1.

              Enabled by default.

       usestore

              Enable  or  disable the "store" repository format which improves
              compatibility with systems that fold case  or  otherwise  mangle
              filenames.  Disabling this option will allow you to store longer
              filenames in some situations at the expense of compatibility.

              Repositories with this on-disk format require Mercurial  version
              0.9.4.

              Enabled by default.

       sparse-revlog

              Enable  or disable the sparse-revlog delta strategy. This format
              improves delta re-use inside revlog. For very branchy  reposito-
              ries,  it results in a smaller store. For repositories with many
              revisions, it also helps performance (by using  shortened  delta
              chains.)

              Repositories  with this on-disk format require Mercurial version
              4.7

              Enabled by default.

       revlog-compression

              Compression algorithm used by revlog. Supported value  are  zlib
              and  zstd.   The zlib engine is the historical default of Mercu-
              rial. zstd is a newer format that is usually a net win over zlib
              operating  faster at better compression rate. Use zstd to reduce
              CPU usage.

              On some system, Mercurial installation may lack  zstd  supports.
              Default is zlib.

       bookmarks-in-store

              Store  bookmarks  in  .hg/store/.  This means that bookmarks are
              shared when using hg share regardless of the -B option.

              Repositories with this on-disk format require Mercurial  version
              5.1.

              Disabled by default.

   graph
       Web  graph  view  configuration. This section let you change graph ele-
       ments display properties by branches, for instance to make the  default
       branch stand out.

       Each line has the following format:

       <branch>.<argument> = <value>

       where <branch> is the name of the branch being customized. Example:

       [graph]
       # 2px width
       default.width = 2
       # red color
       default.color = FF0000

       Supported arguments:

       width

              Set branch edges width in pixels.

       color

              Set branch edges color in hexadecimal RGB notation.

   hooks
       Commands or Python functions that get automatically executed by various
       actions such as starting or finishing a commit. Multiple hooks  can  be
       run for the same action by appending a suffix to the action. Overriding
       a site-wide hook can be done by changing its value or setting it to  an
       empty string.  Hooks can be prioritized by adding a prefix of priority.
       to the hook name on a new line and setting the  priority.  The  default
       priority is 0.

       Example .hg/hgrc:

       [hooks]
       # update working directory after adding changesets
       changegroup.update = hg update
       # do not use the site-wide hook
       incoming =
       incoming.email = /my/email/hook
       incoming.autobuild = /my/build/hook
       # force autobuild hook to run before other incoming hooks
       priority.incoming.autobuild = 1

       Most  hooks  are  run  with  environment variables set that give useful
       additional information. For each hook below, the environment  variables
       it  is  passed are listed with names in the form $HG_foo. The $HG_HOOK-
       TYPE and $HG_HOOKNAME variables are set for all  hooks.   They  contain
       the  type of hook which triggered the run and the full name of the hook
       in the config,  respectively.  In  the  example  above,  this  will  be
       $HG_HOOKTYPE=incoming and $HG_HOOKNAME=incoming.email.

       changegroup

              Run  after a changegroup has been added via push, pull or unbun-
              dle.  The ID of the first new changeset is in $HG_NODE and  last
              is  in  $HG_NODE_LAST.   The  URL  from which changes came is in
              $HG_URL.

       commit

              Run after a changeset has been created in the local  repository.
              The  ID  of  the  newly created changeset is in $HG_NODE. Parent
              changeset IDs are in $HG_PARENT1 and $HG_PARENT2.

       incoming

              Run after a changeset has been pulled, pushed, or unbundled into
              the  local  repository. The ID of the newly arrived changeset is
              in $HG_NODE. The URL that  was  source  of  the  changes  is  in
              $HG_URL.

       outgoing

              Run  after sending changes from the local repository to another.
              The ID of first changeset sent is in  $HG_NODE.  The  source  of
              operation  is  in $HG_SOURCE. Also see hg help config.hooks.pre-
              outgoing.

       post-<command>

              Run after successful invocations of the associated command.  The
              contents  of  the  command  line  are passed as $HG_ARGS and the
              result code in $HG_RESULT. Parsed  command  line  arguments  are
              passed  as $HG_PATS and $HG_OPTS. These contain string represen-
              tations of the  python  data  internally  passed  to  <command>.
              $HG_OPTS  is  a  dictionary of options (with unspecified options
              set to their defaults).  $HG_PATS is a list of  arguments.  Hook
              failure is ignored.

       fail-<command>

              Run after a failed invocation of an associated command. The con-
              tents of the command line are passed as $HG_ARGS. Parsed command
              line  arguments  are passed as $HG_PATS and $HG_OPTS. These con-
              tain string representations of the python data internally passed
              to <command>. $HG_OPTS is a dictionary of options (with unspeci-
              fied options set to their defaults). $HG_PATS is a list of argu-
              ments.  Hook failure is ignored.

       pre-<command>

              Run before executing the associated command. The contents of the
              command line are passed as $HG_ARGS. Parsed command  line  argu-
              ments  are passed as $HG_PATS and $HG_OPTS. These contain string
              representations of the  data  internally  passed  to  <command>.
              $HG_OPTS  is  a  dictionary of options (with unspecified options
              set to their defaults). $HG_PATS is a list of arguments. If  the
              hook  returns failure, the command doesn't execute and Mercurial
              returns the failure code.

       prechangegroup

              Run before a changegroup is added via push,  pull  or  unbundle.
              Exit status 0 allows the changegroup to proceed. A non-zero sta-
              tus will cause the push, pull or unbundle to fail. The URL  from
              which changes will come is in $HG_URL.

       precommit

              Run  before  starting  a  local commit. Exit status 0 allows the
              commit to proceed. A non-zero status will cause  the  commit  to
              fail.  Parent changeset IDs are in $HG_PARENT1 and $HG_PARENT2.

       prelistkeys

              Run  before listing pushkeys (like bookmarks) in the repository.
              A non-zero status will cause failure. The key  namespace  is  in
              $HG_NAMESPACE.

       preoutgoing

              Run  before collecting changes to send from the local repository
              to another. A non-zero status will cause failure. This lets  you
              prevent  pull  over HTTP or SSH. It can also prevent propagating
              commits (via local pull, push (outbound)  or  bundle  commands),
              but  not  completely, since you can just copy files instead. The
              source of operation is in $HG_SOURCE. If "serve", the  operation
              is  happening  on  behalf of a remote SSH or HTTP repository. If
              "push", "pull" or "bundle", the operation is happening on behalf
              of a repository on same system.

       prepushkey

              Run  before  a pushkey (like a bookmark) is added to the reposi-
              tory. A non-zero status will cause the key to be  rejected.  The
              key  namespace  is  in $HG_NAMESPACE, the key is in $HG_KEY, the
              old value (if any) is in  $HG_OLD,  and  the  new  value  is  in
              $HG_NEW.

       pretag

              Run  before  creating  a tag. Exit status 0 allows the tag to be
              created. A non-zero status will cause the tag to fail. The ID of
              the  changeset  to  tag  is  in  $HG_NODE. The name of tag is in
              $HG_TAG. The tag is local if $HG_LOCAL=1, or in  the  repository
              if $HG_LOCAL=0.

       pretxnopen

              Run  before  any  new repository transaction is open. The reason
              for the transaction will be in $HG_TXNNAME, and a unique identi-
              fier  for the transaction will be in HG_TXNID. A non-zero status
              will prevent the transaction from being opened.

       pretxnclose

              Run right before the  transaction  is  actually  finalized.  Any
              repository change will be visible to the hook program. This lets
              you validate the transaction content or change it. Exit status 0
              allows  the  commit to proceed. A non-zero status will cause the
              transaction to be rolled back. The reason  for  the  transaction
              opening  will be in $HG_TXNNAME, and a unique identifier for the
              transaction will be in HG_TXNID. The rest of the available  data
              will  vary  according  the transaction type. New changesets will
              add  $HG_NODE  (the  ID   of   the   first   added   changeset),
              $HG_NODE_LAST  (the ID of the last added changeset), $HG_URL and
              $HG_SOURCE variables.   Bookmark  and  phase  changes  will  set
              HG_BOOKMARK_MOVED and HG_PHASES_MOVED to 1 respectively, etc.

       pretxnclose-bookmark

              Run  right  before  a bookmark change is actually finalized. Any
              repository change will be visible to the hook program. This lets
              you validate the transaction content or change it. Exit status 0
              allows the commit to proceed. A non-zero status will  cause  the
              transaction to be rolled back.  The name of the bookmark will be
              available in $HG_BOOKMARK, the new  bookmark  location  will  be
              available in $HG_NODE while the previous location will be avail-
              able in $HG_OLDNODE. In case of a bookmark creation  $HG_OLDNODE
              will  be  empty. In case of deletion $HG_NODE will be empty.  In
              addition, the reason for the  transaction  opening  will  be  in
              $HG_TXNNAME, and a unique identifier for the transaction will be
              in HG_TXNID.

       pretxnclose-phase

              Run right before a  phase  change  is  actually  finalized.  Any
              repository change will be visible to the hook program. This lets
              you validate the transaction content or change it. Exit status 0
              allows  the commit to proceed.  A non-zero status will cause the
              transaction to be rolled  back.  The  hook  is  called  multiple
              times,  once  for each revision affected by a phase change.  The
              affected node is available in $HG_NODE, the phase  in  $HG_PHASE
              while  the  previous $HG_OLDPHASE. In case of new node, $HG_OLD-
              PHASE will be empty.  In addition, the reason for  the  transac-
              tion opening will be in $HG_TXNNAME, and a unique identifier for
              the transaction will be in HG_TXNID. The hook is  also  run  for
              newly  added revisions. In this case the $HG_OLDPHASE entry will
              be empty.

       txnclose

              Run after any repository transaction has been committed. At this
              point,  the  transaction  can no longer be rolled back. The hook
              will  run  after  the  lock  is  released.  See  hg  help   con-
              fig.hooks.pretxnclose for details about available variables.

       txnclose-bookmark

              Run after any bookmark change has been committed. At this point,
              the transaction can no longer be rolled back. The hook will  run
              after  the  lock  is  released. See hg help config.hooks.pretxn-
              close-bookmark for details about available variables.

       txnclose-phase

              Run after any phase change has been committed.  At  this  point,
              the  transaction can no longer be rolled back. The hook will run
              after the lock is released.  See  hg  help  config.hooks.pretxn-
              close-phase for details about available variables.

       txnabort

              Run   when   a   transaction   is  aborted.  See  hg  help  con-
              fig.hooks.pretxnclose for details about available variables.

       pretxnchangegroup

              Run after a changegroup has been added via push, pull or  unbun-
              dle,  but before the transaction has been committed. The change-
              group is visible to the hook program. This allows validation  of
              incoming changes before accepting them.  The ID of the first new
              changeset is in $HG_NODE and last is in $HG_NODE_LAST. Exit sta-
              tus  0  allows the transaction to commit. A non-zero status will
              cause the transaction to be rolled back, and the push,  pull  or
              unbundle will fail. The URL that was the source of changes is in
              $HG_URL.

       pretxncommit

              Run after a changeset has been created, but before the  transac-
              tion is committed. The changeset is visible to the hook program.
              This allows validation of the commit message and  changes.  Exit
              status  0  allows  the commit to proceed. A non-zero status will
              cause the transaction to be rolled  back.  The  ID  of  the  new
              changeset  is  in  $HG_NODE.  The  parent  changeset  IDs are in
              $HG_PARENT1 and $HG_PARENT2.

       preupdate

              Run before updating the working directory. Exit status 0  allows
              the  update  to  proceed.  A  non-zero  status  will prevent the
              update.  The changeset ID of first new parent is in $HG_PARENT1.
              If  updating  to  a  merge,  the  ID  of second new parent is in
              $HG_PARENT2.

       listkeys

              Run after listing pushkeys (like bookmarks) in  the  repository.
              The  key  namespace is in $HG_NAMESPACE. $HG_VALUES is a dictio-
              nary containing the keys and values.

       pushkey

              Run after a pushkey (like a bookmark) is added  to  the  reposi-
              tory.  The  key  namespace  is  in  $HG_NAMESPACE, the key is in
              $HG_KEY, the old value (if any) is in $HG_OLD, and the new value
              is in $HG_NEW.

       tag

              Run after a tag is created. The ID of the tagged changeset is in
              $HG_NODE.  The name of tag is in $HG_TAG. The tag  is  local  if
              $HG_LOCAL=1, or in the repository if $HG_LOCAL=0.

       update

              Run  after  updating  the working directory. The changeset ID of
              first new parent is in $HG_PARENT1. If updating to a merge,  the
              ID  of  second  new parent is in $HG_PARENT2. If the update suc-
              ceeded, $HG_ERROR=0. If the update  failed  (e.g.  because  con-
              flicts were not resolved), $HG_ERROR=1.

       Note   It  is  generally  better  to use standard hooks rather than the
              generic pre- and post- command hooks, as they are guaranteed  to
              be  called  in the appropriate contexts for influencing transac-
              tions.  Also, hooks like "commit" will be called in all contexts
              that  generate  a commit (e.g. tag) and not just the commit com-
              mand.

       The syntax for Python hooks is as follows:

       hookname = python:modulename.submodule.callable
       hookname = python:/path/to/python/module.py:callable

       Python hooks are run within the Mercurial process. Each hook is  called
       with  at  least  three  keyword  arguments: a ui object (keyword ui), a
       repository object (keyword repo), and a  hooktype  keyword  that  tells
       what  kind  of  hook is used. Arguments listed as environment variables
       above are passed as keyword arguments, with no HG_ prefix, and names in
       lower case.

       If a Python hook returns a "true" value or raises an exception, this is
       treated as a failure.

   hostfingerprints
       (Deprecated. Use [hostsecurity]'s fingerprints options instead.)

       Fingerprints of the certificates of known HTTPS servers.

       A HTTPS connection to a server with a fingerprint configured here  will
       only  succeed if the servers certificate matches the fingerprint.  This
       is very similar to how ssh known hosts works.

       The fingerprint is the SHA-1 hash value of the DER encoded certificate.
       Multiple  values can be specified (separated by spaces or commas). This
       can be used to define both old and new fingerprints while a host  tran-
       sitions to a new certificate.

       The  CA  chain  and  web.cacerts is not used for servers with a finger-
       print.

       For example:

       [hostfingerprints]
       hg.intevation.de = fc:e2:8d:d9:51:cd:cb:c1:4d:18:6b:b7:44:8d:49:72:57:e6:cd:33
       hg.intevation.org = fc:e2:8d:d9:51:cd:cb:c1:4d:18:6b:b7:44:8d:49:72:57:e6:cd:33

   hostsecurity
       Used to specify global and per-host security settings for connecting to
       other machines.

       The following options control default behavior for all hosts.

       ciphers

              Defines the cryptographic ciphers to use for connections.

              Value  must  be a valid OpenSSL Cipher List Format as documented
              at                          https://www.openssl.org/docs/manmas-
              ter/apps/ciphers.html#CIPHER-LIST-FORMAT.

              This  setting  is  for advanced users only. Setting to incorrect
              values can significantly lower connection security  or  decrease
              performance.  You have been warned.

              This option requires Python 2.7.

       minimumprotocol

              Defines the minimum channel encryption protocol to use.

              By  default, the highest version of TLS supported by both client
              and server is used.

              Allowed values are: tls1.0, tls1.1, tls1.2.

              When running on an old Python version, only  tls1.0  is  allowed
              since old versions of Python only support up to TLS 1.0.

              When  running  a  Python  that supports modern TLS versions, the
              default is tls1.1. tls1.0 can still be used to  allow  TLS  1.0.
              However, this weakens security and should only be used as a fea-
              ture of last resort if a server does not support TLS 1.1+.

       Options in the [hostsecurity] section can have the  form  hostname:set-
       ting. This allows multiple settings to be defined on a per-host basis.

       The following per-host settings can be defined.

       ciphers

              This  behaves  like  ciphers  as  described above except it only
              applies to the host on which it is defined.

       fingerprints

              A list of hashes of the  DER  encoded  peer/remote  certificate.
              Values     have    the    form    algorithm:fingerprint.    e.g.
              sha256:c3ab8ff13720e8ad9047dd39466b3c8974e592c2fa383d4a3960714caef0c4f2.
              In addition, colons (:) can appear in the fingerprint part.

              The  following  algorithms/prefixes are supported: sha1, sha256,
              sha512.

              Use of sha256 or sha512 is preferred.

              If a fingerprint is specified, the CA chain is not validated for
              this  host  and Mercurial will require the remote certificate to
              match one of the  fingerprints  specified.  This  means  if  the
              server updates its certificate, Mercurial will abort until a new
              fingerprint is defined.  This can provide stronger security than
              traditional CA-based validation at the expense of convenience.

              This option takes precedence over verifycertsfile.

       minimumprotocol

              This  behaves  like minimumprotocol as described above except it
              only applies to the host on which it is defined.

       verifycertsfile

              Path to file a containing a list  of  PEM  encoded  certificates
              used to verify the server certificate. Environment variables and
              ~user constructs are expanded in the filename.

              The server certificate or the certificate's certificate  author-
              ity  (CA) must match a certificate from this file or certificate
              verification will fail and connections to  the  server  will  be
              refused.

              If  defined,  only  certificates  provided  by this file will be
              used: web.cacerts and any system/default certificates  will  not
              be used.

              This option has no effect if the per-host fingerprints option is
              set.

              The format of the file is as follows:

              -----BEGIN CERTIFICATE-----
              ... (certificate in base64 PEM encoding) ...
              -----END CERTIFICATE-----
              -----BEGIN CERTIFICATE-----
              ... (certificate in base64 PEM encoding) ...
              -----END CERTIFICATE-----

       For example:

       [hostsecurity]
       hg.example.com:fingerprints = sha256:c3ab8ff13720e8ad9047dd39466b3c8974e592c2fa383d4a3960714caef0c4f2
       hg2.example.com:fingerprints = sha1:914f1aff87249c09b6859b88b1906d30756491ca, sha1:fc:e2:8d:d9:51:cd:cb:c1:4d:18:6b:b7:44:8d:49:72:57:e6:cd:33
       hg3.example.com:fingerprints = sha256:9a:b0:dc:e2:75:ad:8a:b7:84:58:e5:1f:07:32:f1:87:e6:bd:24:22:af:b7:ce:8e:9c:b4:10:cf:b9:f4:0e:d2
       foo.example.com:verifycertsfile = /etc/ssl/trusted-ca-certs.pem

       To change the default minimum protocol version to TLS 1.2 but to  allow
       TLS 1.1 when connecting to hg.example.com:

       [hostsecurity]
       minimumprotocol = tls1.2
       hg.example.com:minimumprotocol = tls1.1

   http_proxy
       Used to access web-based Mercurial repositories through a HTTP proxy.

       host

              Host  name  and (optional) port of the proxy server, for example
              "myproxy:8000".

       no

              Optional. Comma-separated list of host names that should  bypass
              the proxy.

       passwd

              Optional. Password to authenticate with at the proxy server.

       user

              Optional. User name to authenticate with at the proxy server.

       always

              Optional.  Always  use  the  proxy,  even  for localhost and any
              entries in http_proxy.no. (default: False)

   http
       Used to configure access to Mercurial repositories via HTTP.

       timeout

              If set, blocking operations will timeout after  that  many  sec-
              onds.  (default: None)

   merge
       This section specifies behavior during merges and updates.

       checkignored

              Controls behavior when an ignored file on disk has the same name
              as a tracked file in the changeset being merged or  updated  to,
              and  has different contents. Options are abort, warn and ignore.
              With abort, abort on such files. With warn, warn on  such  files
              and  back  them  up as .orig. With ignore, don't print a warning
              and back them up as .orig. (default: abort)

       checkunknown

              Controls behavior when an unknown file that  isn't  ignored  has
              the same name as a tracked file in the changeset being merged or
              updated to, and has different contents. Similar to  merge.check-
              ignored, except for files that are not ignored. (default: abort)

       on-failure

              When  set  to continue (the default), the merge process attempts
              to merge all unresolved  files  using  the  merge  chosen  tool,
              regardless  of  whether  previous file merge attempts during the
              process succeeded or not.  Setting this to  prompt  will  prompt
              after any merge failure continue or halt the merge process. Set-
              ting this to halt will automatically halt the merge  process  on
              any  merge  tool  failure. The merge process can be restarted by
              using the resolve command. When a merge is halted,  the  reposi-
              tory is left in a normal unresolved merge state.  (default: con-
              tinue)

       strict-capability-check

              Whether  capabilities  of  internal  merge  tools  are   checked
              strictly  or  not, while examining rules to decide merge tool to
              be used.  (default: False)

   merge-patterns
       This section specifies merge tools to associate  with  particular  file
       patterns.  Tools  matched  here  will  take precedence over the default
       merge tool. Patterns are globs by default,  rooted  at  the  repository
       root.

       Example:

       [merge-patterns]
       **.c = kdiff3
       **.jpg = myimgmerge

   merge-tools
       This  section  configures  external  merge  tools to use for file-level
       merges. This section has likely been  preconfigured  at  install  time.
       Use  hg  config  merge-tools to check the existing configuration.  Also
       see hg help merge-tools for more details.

       Example ~/.hgrc:

       [merge-tools]
       # Override stock tool location
       kdiff3.executable = ~/bin/kdiff3
       # Specify command line
       kdiff3.args = $base $local $other -o $output
       # Give higher priority
       kdiff3.priority = 1

       # Changing the priority of preconfigured tool
       meld.priority = 0

       # Disable a preconfigured tool
       vimdiff.disabled = yes

       # Define new tool
       myHtmlTool.args = -m $local $other $base $output
       myHtmlTool.priority = 1

       Supported arguments:

       priority

              The priority in which to evaluate this tool.  (default: 0)

       executable

              Either just the name of the executable or its pathname.

              (default: the tool name)

       args

              The arguments to pass to the tool executable. You can  refer  to
              the  files being merged as well as the output file through these
              variables: $base, $local, $other, $output.

              The meaning of $local and $other can  vary  depending  on  which
              action  is  being  performed.  During an update or merge, $local
              represents the original state of the file, while  $other  repre-
              sents the commit you are updating to or the commit you are merg-
              ing with. During a rebase, $local represents the destination  of
              the rebase, and $other represents the commit being rebased.

              Some  operations define custom labels to assist with identifying
              the revisions,  accessible  via  $labellocal,  $labelother,  and
              $labelbase.  If  custom  labels are not available, these will be
              local, other, and base, respectively.   (default:  $local  $base
              $other)

       premerge

              Attempt  to run internal non-interactive 3-way merge tool before
              launching external tool.   Options  are  true,  false,  keep  or
              keep-merge3.  The  keep option will leave markers in the file if
              the premerge fails. The keep-merge3 will do the same but include
              information  about  the  base  of  the  merge in the marker (see
              internal :merge3 in hg help merge-tools).  (default: True)

       binary

              This tool can merge binary files. (default: False,  unless  tool
              was selected by file pattern match)

       symlink

              This tool can merge symlinks. (default: False)

       check

              A list of merge success-checking options:

              changed

                     Ask  whether  merge  was  successful when the merged file
                     shows no changes.

              conflicts

                     Check whether there are conflicts even  though  the  tool
                     reported success.

              prompt

                     Always  prompt  for  merge success, regardless of success
                     reported by tool.

       fixeol

              Attempt to  fix  up  EOL  changes  caused  by  the  merge  tool.
              (default: False)

       gui

              This  tool  requires  a  graphical  interface  to run. (default:
              False)

       mergemarkers

              Controls whether the labels passed via $labellocal, $labelother,
              and  $labelbase are detailed (respecting mergemarkertemplate) or
              basic. If premerge is keep or keep-merge3, the conflict  markers
              generated during premerge will be detailed if either this option
              or the corresponding option in the  [ui]  section  is  detailed.
              (default: basic)

       mergemarkertemplate

              This  setting  can  be used to override mergemarkertemplate from
              the [ui] section on  a  per-tool  basis;  this  applies  to  the
              $label-prefixed  variables  and to the conflict markers that are
              generated if premerge is keep` or ``keep-merge3. See the  corre-
              sponding variable in [ui] for more information.

   pager
       Setting  used  to control when to paginate and with what external tool.
       See hg help pager for details.

       pager

              Define the external tool used as pager.

              If no pager is set,  Mercurial  uses  the  environment  variable
              $PAGER.   If  neither  pager.pager, nor $PAGER is set, a default
              pager will be used, typically less on Unix and more on  Windows.
              Example:

              [pager]
              pager = less -FRX

       ignore

              List of commands to disable the pager for. Example:

              [pager]
              ignore = version, help, update

   patch
       Settings  used when applying patches, for instance through the 'import'
       command or with Mercurial Queues extension.

       eol

              When set to 'strict' patch content  and  patched  files  end  of
              lines  are  preserved. When set to lf or crlf, both files end of
              lines are ignored when patching and the result line endings  are
              normalized  to  either  LF (Unix) or CRLF (Windows). When set to
              auto, end of lines are again ignored  while  patching  but  line
              endings  in  patched files are normalized to their original set-
              ting on a per-file basis. If target file does not exist  or  has
              no  end  of  line,  patch line endings are preserved.  (default:
              strict)

       fuzz

              The number of lines of 'fuzz' to allow  when  applying  patches.
              This  controls how much context the patcher is allowed to ignore
              when trying to apply a patch.  (default: 2)

   paths
       Assigns symbolic names and behavior to repositories.

       Options are symbolic names defining the URL or directory  that  is  the
       location of the repository. Example:

       [paths]
       my_server = https://example.com/my_repo
       local_path = /home/me/repo

       These  symbolic  names  can be used from the command line. To pull from
       my_server:  hg  pull  my_server.  To  push  to  local_path:   hg   push
       local_path.

       Options  containing  colons  (:)  denote sub-options that can influence
       behavior for that specific path. Example:

       [paths]
       my_server = https://example.com/my_path
       my_server:pushurl = ssh://example.com/my_path

       The following sub-options can be defined:

       pushurl

              The URL to use for push operations. If not defined, the location
              defined by the path's main entry is used.

       pushrev

              A revset defining which revisions to push by default.

              When  hg  push  is  executed  without  a -r argument, the revset
              defined by this sub-option is evaluated  to  determine  what  to
              push.

              For  example,  a  value  of  . will push the working directory's
              revision by default.

              Revsets specifying bookmarks will not  result  in  the  bookmark
              being pushed.

       The following special named paths exist:

       default

              The  URL  or directory to use when no source or remote is speci-
              fied.

              hg clone will automatically define this path to the location the
              repository was cloned from.

       default-push

              (deprecated)  The URL or directory for the default hg push loca-
              tion.  default:pushurl should be used instead.

   phases
       Specifies default handling of phases.  See  hg  help  phases  for  more
       information about working with phases.

       publish

              Controls  draft  phase  behavior  when working as a server. When
              true, pushed changesets are set to public  in  both  client  and
              server  and pulled or cloned changesets are set to public in the
              client.  (default: True)

       new-commit

              Phase of newly-created commits.  (default: draft)

       checksubrepos

              Check the phase of the current revision of  each  subrepository.
              Allowed  values are "ignore", "follow" and "abort". For settings
              other than "ignore", the phase of the current revision  of  each
              subrepository  is  checked  before committing the parent reposi-
              tory. If any of those phases is greater than the  phase  of  the
              parent  repository  (e.g.  if  a  subrepo is in a "secret" phase
              while the parent repo is in "draft" phase), the commit is either
              aborted (if checksubrepos is set to "abort") or the higher phase
              is used for the parent repository commit (if set  to  "follow").
              (default: follow)

   profiling
       Specifies  profiling  type,  format, and file output. Two profilers are
       supported: an instrumenting profiler (named ls), and  a  sampling  pro-
       filer (named stat).

       In  this  section description, 'profiling data' stands for the raw data
       collected during profiling, while 'profiling report' stands for a  sta-
       tistical text report generated from the profiling data.

       enabled

              Enable the profiler.  (default: false)

              This is equivalent to passing --profile on the command line.

       type

              The type of profiler to use.  (default: stat)

              ls

                     Use  Python's  built-in instrumenting profiler. This pro-
                     filer works on all platforms, but  each  line  number  it
                     reports is the first line of a function. This restriction
                     makes it difficult to identify the expensive parts  of  a
                     non-trivial function.

              stat

                     Use  a  statistical  profiler, statprof. This profiler is
                     most useful for profiling commands that  run  for  longer
                     than about 0.1 seconds.

       format

              Profiling  format.   Specific  to the ls instrumenting profiler.
              (default: text)

              text

                     Generate a profiling report. When saving to  a  file,  it
                     should  be  noted  that only the report is saved, and the
                     profiling data is not kept.

              kcachegrind

                     Format profiling data for kcachegrind use: when saving to
                     a  file,  the  generated file can directly be loaded into
                     kcachegrind.

       statformat

              Profiling format for the stat profiler.  (default: hotpath)

              hotpath

                     Show a tree-based display containing the hot path of exe-
                     cution (where most time was spent).

              bymethod

                     Show  a  table  of methods ordered by how frequently they
                     are active.

              byline

                     Show a table of lines in files ordered by how  frequently
                     they are active.

              json

                     Render profiling data as JSON.

       frequency

              Sampling  frequency.   Specific  to  the stat sampling profiler.
              (default: 1000)

       output

              File path where profiling data or report should be saved. If the
              file  exists, it is replaced. (default: None, data is printed on
              stderr)

       sort

              Sort field.  Specific to the ls instrumenting profiler.  One  of
              callcount,  reccallcount,  totaltime  and inlinetime.  (default:
              inlinetime)

       time-track

              Control if the stat profiler track cpu or real time.   (default:
              cpu on Windows, otherwise real)

       limit

              Number  of  lines to show. Specific to the ls instrumenting pro-
              filer.  (default: 30)

       nested

              Show at most this number of lines of drill-down info after  each
              main  entry.  This can help explain the difference between Total
              and  Inline.   Specific  to  the  ls   instrumenting   profiler.
              (default: 0)

       showmin

              Minimum fraction of samples an entry must have for it to be dis-
              played.  Can be specified as a float between 0.0 and 1.0 or  can
              have a % afterwards to allow values up to 100. e.g. 5%.

              Only used by the stat profiler.

              For the hotpath format, default is 0.05.  For the chrome format,
              default is 0.005.

              The option is unused on other formats.

       showmax

              Maximum fraction of samples an  entry  can  have  before  it  is
              ignored in display. Values format is the same as showmin.

              Only used by the stat profiler.

              For the chrome format, default is 0.999.

              The option is unused on other formats.

       showtime

              Show  time  taken as absolute durations, in addition to percent-
              ages.  Only used by the hotpath format.  (default: true)

   progress
       Mercurial commands can draw progress bars that are  as  informative  as
       possible.  Some  progress  bars  only  offer indeterminate information,
       while others have a definite end point.

       debug

              Whether to print debug info  when  updating  the  progress  bar.
              (default: False)

       delay

              Number  of  seconds  (float)  before  showing  the progress bar.
              (default: 3)

       changedelay

              Minimum delay before showing a new topic. When set to less  than
              3 * refresh, that value will be used instead. (default: 1)

       estimateinterval

              Maximum  sampling  interval  in  seconds for speed and estimated
              time calculation. (default: 60)

       refresh

              Time in seconds between refreshes of the progress bar. (default:
              0.1)

       format

              Format of the progress bar.

              Valid entries for the format field are topic, bar, number, unit,
              estimate, speed, and item. item defaults to the last 20  charac-
              ters  of  the  item,  but  this  can be changed by adding either
              -<num> which would take the last num characters, or  +<num>  for
              the first num characters.

              (default: topic bar number estimate)

       width

              If  set, the maximum width of the progress information (that is,
              min(width, term width) will be used).

       clear-complete

              Clear the progress bar after it's done. (default: True)

       disable

              If true, don't show a progress bar.

       assume-tty

              If true, ALWAYS show a progress bar, unless disable is given.

   rebase
       evolution.allowdivergence

              Default to False, when True allow creating divergence when  per-
              forming rebase of obsolete changesets.

   revsetalias
       Alias definitions for revsets. See hg help revsets for details.

   rewrite
       backup-bundle

              Whether  to save stripped changesets to a bundle file. (default:
              True)

       update-timestamp

              If true, updates the date and time of the changeset to  current.
              It is only applicable for hg amend in current version.

   storage
       Control  the  strategy  Mercurial  uses  internally  to  store history.
       Options in this category impact performance and repository size.

       revlog.optimize-delta-parent-choice

              When storing a merge revision, both parents will be equally con-
              sidered  as  a possible delta base. This results in better delta
              selection  and  improved  revlog  compression.  This  option  is
              enabled by default.

              Turning  this option off can result in large increase of reposi-
              tory size for repository with many merges.

       revlog.reuse-external-delta-parent

              Control the order in which delta  parents  are  considered  when
              adding new revisions from an external source.  (typically: apply
              bundle from hg pull or hg push).

              New revisions are usually provided  as  a  delta  against  other
              revisions.  By  default,  Mercurial will try to reuse this delta
              first, therefore using the same "delta parent"  as  the  source.
              Directly  using  delta's  from  the source reduces CPU usage and
              usually speeds up operation. However, in some case,  the  source
              might  have  sub-optimal delta bases and forcing their reevalua-
              tion is useful. For example, pushes from  an  old  client  could
              have  sub-optimal  delta's  parent that the server want to opti-
              mize. (lack of general  delta,  bad  parents,  choice,  lack  of
              sparse-revlog, etc).

              This  option  is  enabled by default. Turning it off will ensure
              bad delta parent choices from older client do not  propagate  to
              this repository, at the cost of a small increase in CPU consump-
              tion.

              Note: this option only control the order in which delta  parents
              are considered.  Even when disabled, the existing delta from the
              source will be reused if the same delta parent is selected.

       revlog.reuse-external-delta

              Control the reuse of delta from  external  source.   (typically:
              apply bundle from hg pull or hg push).

              New  revisions  are  usually provided as a delta against another
              revision. By default, Mercurial  will  not  recompute  the  same
              delta  again,  trusting  externally  provided deltas. There have
              been rare cases of small adjustment to the diffing algorithm  in
              the  past.  So  in some rare case, recomputing delta provided by
              ancient clients can  provides  better  results.  Disabling  this
              option  means  going  through a full delta recomputation for all
              incoming revisions. It means a large increase in CPU  usage  and
              will slow operations down.

              This  option  is enabled by default. When disabled, it also dis-
              ables  the  related   storage.revlog.reuse-external-delta-parent
              option.

       revlog.zlib.level

              Zlib  compression  level used when storing data into the reposi-
              tory. Accepted Value range from  1  (lowest  compression)  to  9
              (highest compression). Zlib default value is 6.

       revlog.zstd.level

              zstd  compression  level used when storing data into the reposi-
              tory. Accepted Value range from 1  (lowest  compression)  to  22
              (highest compression).  (default 3)

   server
       Controls generic server settings.

       bookmarks-pushkey-compat

              Trigger  pushkey  hook  when being pushed bookmark updates. This
              config exist for compatibility purpose (default to True)

              If you use pushkey and pre-pushkey  hooks  to  control  bookmark
              movement  we recommend you migrate them to txnclose-bookmark and
              pretxnclose-bookmark.

       compressionengines

              List of compression  engines  and  their  relative  priority  to
              advertise to clients.

              The  order of compression engines determines their priority, the
              first having the highest priority. If a  compression  engine  is
              not listed here, it won't be advertised to clients.

              If  not  set  (the  default), built-in defaults are used. Run hg
              debuginstall to list available  compression  engines  and  their
              default wire protocol priority.

              Older  Mercurial  clients only support zlib compression and this
              setting has no effect for legacy clients.

       uncompressed

              Whether to allow clients to clone a repository using the  uncom-
              pressed  streaming  protocol. This transfers about 40% more data
              than a regular clone, but uses  less  memory  and  CPU  on  both
              server  and  client.  Over  a LAN (100 Mbps or better) or a very
              fast WAN, an uncompressed streaming clone is a lot faster (~10x)
              than a regular clone. Over most WAN connections (anything slower
              than about 6 Mbps), uncompressed streaming is slower, because of
              the  extra data transfer overhead. This mode will also temporar-
              ily hold the write lock while determining what data to transfer.
              (default: True)

       uncompressedallowsecret

              Whether  to  allow  stream  clones  when the repository contains
              secret changesets. (default: False)

       preferuncompressed

              When set, clients will try to  use  the  uncompressed  streaming
              protocol. (default: False)

       disablefullbundle

              When  set, servers will refuse attempts to do pull-based clones.
              If this option is set, preferuncompressed and/or  clone  bundles
              are  highly  recommended.  Partial clones will still be allowed.
              (default: False)

       streamunbundle

              When set, servers will apply data sent from the client directly,
              otherwise  it  will  be  written to a temporary file first. This
              option effectively prevents concurrent pushes.

       pullbundle

              When set, the server will check pullbundle.manifest for  bundles
              covering  the requested heads and common nodes. The first match-
              ing entry will be streamed to the client.

              For HTTP transport, the stream will still use  zlib  compression
              for older clients.

       concurrent-push-mode

              Level of allowed race condition between two pushing clients.

              o 'strict':  push is abort if another client touched the reposi-
                tory while the push was preparing. (default)

              o 'check-related': push is only aborted if it affects head  that
                got also affected while the push was preparing.

       This  requires  compatible  client  (version 4.3 and later). Old client
       will use 'strict'.

       validate

              Whether to validate the completeness  of  pushed  changesets  by
              checking  that all new file revisions specified in manifests are
              present. (default: False)

       maxhttpheaderlen

              Instruct HTTP clients not to send request  headers  longer  than
              this many bytes. (default: 1024)

       bundle1

              Whether  to allow clients to push and pull using the legacy bun-
              dle1 exchange format. (default: True)

       bundle1gd

              Like bundle1 but only used if the repository is using the gener-
              aldelta storage format. (default: True)

       bundle1.push

              Whether  to  allow  clients  to  push  using  the legacy bundle1
              exchange format. (default: True)

       bundle1gd.push

              Like bundle1.push but only used if the repository is  using  the
              generaldelta storage format. (default: True)

       bundle1.pull

              Whether  to  allow  clients  to  pull  using  the legacy bundle1
              exchange format. (default: True)

       bundle1gd.pull

              Like bundle1.pull but only used if the repository is  using  the
              generaldelta storage format. (default: True)

              Large  repositories using the generaldelta storage format should
              consider setting this  option  because  converting  generaldelta
              repositories to the exchange format required by the bundle1 data
              format can consume a lot of CPU.

       bundle2.stream

              Whether to allow clients to pull  using  the  bundle2  streaming
              protocol.  (default: True)

       zliblevel

              Integer  between  -1  and  9  that controls the zlib compression
              level for wire protocol commands that send zlib compressed  out-
              put (notably the commands that send repository history data).

              The  default (-1) uses the default zlib compression level, which
              is likely equivalent to 6. 0 means no compression. 9 means maxi-
              mum compression.

              Setting  this  option allows server operators to make trade-offs
              between bandwidth and CPU used. Lowering the compression  lowers
              CPU utilization but sends more bytes to clients.

              This option only impacts the HTTP server.

       zstdlevel

              Integer  between  1  and  22  that controls the zstd compression
              level for wire protocol commands. 1 is  the  minimal  amount  of
              compression and 22 is the highest amount of compression.

              The  default  (3) should be significantly faster than zlib while
              likely delivering better compression ratios.

              This option only impacts the HTTP server.

              See also server.zliblevel.

       view

              Repository filter used when exchanging revisions with the peer.

              The default view (served) excludes secret and hidden changesets.
              Another  useful  value  is immutable (no draft, secret or hidden
              changesets). (EXPERIMENTAL)

   smtp
       Configuration for extensions that need to send email messages.

       host

              Host name of mail server, e.g. "mail.example.com".

       port

              Optional. Port to connect to on mail server.  (default:  465  if
              tls is smtps; 25 otherwise)

       tls

              Optional.  Method  to enable TLS when connecting to mail server:
              starttls, smtps or none. (default: none)

       username

              Optional. User name for authenticating  with  the  SMTP  server.
              (default: None)

       password

              Optional.  Password  for authenticating with the SMTP server. If
              not specified, interactive sessions will prompt the user  for  a
              password; non-interactive sessions will fail. (default: None)

       local_hostname

              Optional.  The  hostname  that  the  sender  can use to identify
              itself to the MTA.

   subpaths
       Subrepository source URLs can go stale if a remote server changes  name
       or  becomes  temporarily  unavailable. This section lets you define re-
       write rules of the form:

       <pattern> = <replacement>

       where pattern is a regular expression matching a  subrepository  source
       URL  and  replacement  is  the  replacement  string used to rewrite it.
       Groups can be matched in pattern and referenced  in  replacements.  For
       instance:

       http://server/(.*)-hg/ = http://hg.server/\1/

       rewrites http://server/foo-hg/ into http://hg.server/foo/.

       Relative  subrepository  paths are first made absolute, and the rewrite
       rules are then applied on the full (absolute) path. If pattern  doesn't
       match  the  full  path,  an attempt is made to apply it on the relative
       path alone. The rules are applied in definition order.

   subrepos
       This section contains options that control the  behavior  of  the  sub-
       repositories feature. See also hg help subrepos.

       Security  note:  auditing  in  Mercurial is known to be insufficient to
       prevent clone-time code execution with carefully constructed Git subre-
       pos.  It is unknown if a similar detect is present in Subversion subre-
       pos. Both Git and Subversion subrepos are disabled by  default  out  of
       security concerns. These subrepo types can be enabled using the respec-
       tive options below.

       allowed

              Whether subrepositories are allowed in the working directory.

              When false, commands involving subrepositories (like hg  update)
              will fail for all subrepository types.  (default: true)

       hg:allowed

              Whether  Mercurial  subrepositories  are  allowed in the working
              directory. This option only has an effect if subrepos.allowed is
              true.  (default: true)

       git:allowed

              Whether  Git  subrepositories  are allowed in the working direc-
              tory.  This option only has an  effect  if  subrepos.allowed  is
              true.

              See  the  security  note  above  before  enabling  Git subrepos.
              (default: false)

       svn:allowed

              Whether Subversion subrepositories are allowed  in  the  working
              directory. This option only has an effect if subrepos.allowed is
              true.

              See the security note above before enabling Subversion subrepos.
              (default: false)

   templatealias
       Alias definitions for templates. See hg help templates for details.

   templates
       Use  the  [templates]  section to define template strings.  See hg help
       templates for details.

   trusted
       Mercurial will not use the settings in the .hg/hgrc file from a reposi-
       tory  if  it doesn't belong to a trusted user or to a trusted group, as
       various hgrc features allow arbitrary commands to be run. This issue is
       often  encountered  when  configuring  hooks  or  extensions for shared
       repositories or servers. However, the web interface will use some  safe
       settings from the [web] section.

       This  section  specifies what users and groups are trusted. The current
       user is always trusted. To trust everybody, list a user or a group with
       name  *.  These  settings  must be placed in an already-trusted file to
       take effect, such as $HOME/.hgrc of the user or service running  Mercu-
       rial.

       users

              Comma-separated list of trusted users.

       groups

              Comma-separated list of trusted groups.

   ui
       User interface controls.

       archivemeta

              Whether  to  include  the  .hg_archival.txt file containing meta
              data (hashes for the repository base and for  tip)  in  archives
              created  by  the  hg  archive  command  or downloaded via hgweb.
              (default: True)

       askusername

              Whether to prompt for a username when committing. If  True,  and
              neither  $HGUSER  nor  $EMAIL  has been specified, then the user
              will be prompted to enter a username. If no username is entered,
              the default USER@HOST is used instead.  (default: False)

       clonebundles

              Whether the "clone bundles" feature is enabled.

              When  enabled,  hg  clone may download and apply a server-adver-
              tised bundle file  from  a  URL  instead  of  using  the  normal
              exchange mechanism.

              This can likely result in faster and more reliable clones.

              (default: True)

       clonebundlefallback

              Whether  failure  to  apply  an advertised "clone bundle" from a
              server should result in fallback to a regular clone.

              This is disabled by default because servers  advertising  "clone
              bundles"  often  do so to reduce server load. If advertised bun-
              dles start mass failing and clients automatically fall back to a
              regular clone, this would add significant and unexpected load to
              the server since the server is expecting clone operations to  be
              offloaded  to  pre-generated  bundles. Failing fast (the default
              behavior) ensures clients don't overwhelm the server when "clone
              bundle" application fails.

              (default: False)

       clonebundleprefers

              Defines preferences for which "clone bundles" to use.

              Servers  advertising  "clone  bundles"  may  advertise  multiple
              available bundles. Each bundle may  have  different  attributes,
              such  as  the bundle type and compression format. This option is
              used to prefer a particular bundle over another.

              The following keys are defined by Mercurial:

              BUNDLESPEC
                     A bundle type specifier. These are strings passed  to  hg
                     bundle -t.  e.g. gzip-v2 or bzip2-v1.

              COMPRESSION
                     The  compression  format  of  the  bundle.  e.g. gzip and
                     bzip2.

       Server operators may define custom keys.

       Example   values:   COMPRESSION=bzip2,   BUNDLESPEC=gzip-v2,   COMPRES-
       SION=gzip.

       By default, the first bundle advertised by the server is used.

       color

              When  to  colorize  output. Possible value are Boolean ("yes" or
              "no"), or "debug", or "always". (default: "yes"). "yes" will use
              color whenever it seems possible. See hg help color for details.

       commitsubrepos

              Whether  to  commit modified subrepositories when committing the
              parent repository. If False and one subrepository has  uncommit-
              ted changes, abort the commit.  (default: False)

       debug

              Print debugging information. (default: False)

       editor

              The editor to use during a commit. (default: $EDITOR or vi)

       fallbackencoding

              Encoding  to  try  if  it's not possible to decode the changelog
              using UTF-8. (default: ISO-8859-1)

       graphnodetemplate

              The template used to print changeset nodes in an ASCII  revision
              graph.  (default: {graphnode})

       ignore

              A  file  to read per-user ignore patterns from. This file should
              be in the same format as a repository-wide .hgignore file. File-
              names  are relative to the repository root. This option supports
              hook syntax, so if you want to specify  multiple  ignore  files,
              you  can do so by setting something like ignore.other = ~/.hgig-
              nore2. For details of the ignore  file  format,  see  the  hgig-
              nore(5) man page.

       interactive

              Allow to prompt the user. (default: True)

       interface

              Select  the default interface for interactive features (default:
              text).  Possible values are 'text' and 'curses'.

       interface.chunkselector

              Select the interface for change recording (e.g. hg  commit  -i).
              Possible  values are 'text' and 'curses'.  This config overrides
              the interface specified by ui.interface.

       large-file-limit

              Largest file size that gives no memory  use  warning.   Possible
              values  are  integers  or  0  to  disable  the check.  (default:
              10000000)

       logtemplate

              Template string for commands that print changesets.

       merge

              The conflict resolution program to use during  a  manual  merge.
              For  more  information  on  merge tools see hg help merge-tools.
              For configuring merge tools see the [merge-tools] section.

       mergemarkers

              Sets the merge conflict marker label styling. The detailed style
              uses  the  mergemarkertemplate setting to style the labels.  The
              basic style just uses 'local' and 'other' as the  marker  label.
              One of basic or detailed.  (default: basic)

       mergemarkertemplate

              The  template  used to print the commit description next to each
              conflict marker during merge conflicts. See  hg  help  templates
              for the template format.

              Defaults to showing the hash, tags, branches, bookmarks, author,
              and the first line of the commit description.

              If you use non-ASCII characters in  names  for  tags,  branches,
              bookmarks,  authors,  and/or  commit  descriptions, you must pay
              attention to encodings of managed files. At template  expansion,
              non-ASCII  characters use the encoding specified by the --encod-
              ing global option, HGENCODING  or  other  environment  variables
              that govern your locale. If the encoding of the merge markers is
              different from the encoding of the merged files,  serious  prob-
              lems may occur.

              Can be overridden per-merge-tool, see the [merge-tools] section.

       message-output

              Where to write status and error messages. (default: stdio)

              stderr

                     Everything to stderr.

              stdio

                     Status to stdout, and error to stderr.

       origbackuppath

              The  path to a directory used to store generated .orig files. If
              the path is not a directory, one will be created.  If set, files
              stored in this directory have the same name as the original file
              and do not have a .orig suffix.

       paginate

              Control the pagination of command output (default: True). See hg
              help pager for details.

       patch

              An  optional  external  tool  that hg import and some extensions
              will use for applying patches.  By  default  Mercurial  uses  an
              internal  patch utility. The external tool must work as the com-
              mon Unix patch program. In particular, it must accept a -p argu-
              ment  to  strip patch headers, a -d argument to specify the cur-
              rent directory, a file name to patch, and a patch file  to  take
              from stdin.

              It is possible to specify a patch tool together with extra argu-
              ments. For example, setting this option to  patch  --merge  will
              use the patch program with its 2-way merge option.

       portablefilenames

              Check  for  portable  filenames.  Can  be warn, ignore or abort.
              (default: warn)

              warn

                     Print a warning message on POSIX  platforms,  if  a  file
                     with a non-portable filename is added (e.g. a file with a
                     name that can't be created on Windows because it contains
                     reserved  parts  like AUX, reserved characters like :, or
                     would cause a case collision with an existing file).

              ignore

                     Don't print a warning.

              abort

                     The command is aborted.

              true

                     Alias for warn.

              false

                     Alias for ignore.

       pre-merge-tool-output-template

              A template that is printed before executing  an  external  merge
              tool.  This  can  be  used  to print out additional context that
              might be useful to have during the conflict resolution, such  as
              the  description  of  the  various  commits  involved  or  book-
              marks/tags.

              Additional information is available in the local`,  ``base,  and
              other   dicts.   For  example:  {local.label},  {base.name},  or
              {other.islink}.

       quiet

              Reduce the amount of output printed.  (default: False)

       relative-paths

              Prefer relative paths in the UI.

       remotecmd

              Remote command to use for clone/push/pull operations.  (default:
              hg)

       report_untrusted

              Warn  if  a .hg/hgrc file is ignored due to not being owned by a
              trusted user or group.  (default: True)

       slash

              (Deprecated. Use slashpath template filter instead.)

              Display paths using a slash (/) as the path separator. This only
              makes  a  difference on systems where the default path separator
              is not the slash character  (e.g.  Windows  uses  the  backslash
              character (\)).  (default: False)

       statuscopies

              Display copies in the status command.

       ssh

              Command to use for SSH connections. (default: ssh)

       ssherrorhint

              A  hint shown to the user in the case of SSH error (e.g.  Please
              see http://company/internalwiki/ssh.html)

       strict

              Require exact command names,  instead  of  allowing  unambiguous
              abbreviations. (default: False)

       style

              Name of style to use for command output.

       supportcontact

              A  URL where users should report a Mercurial traceback. Use this
              if you are a large organisation with its own  Mercurial  deploy-
              ment  process  and  crash  reports  should  be addressed to your
              internal support.

       textwidth

              Maximum width of help text. A longer line generated by  hg  help
              or  hg subcommand --help will be broken after white space to get
              this width or the terminal  width,  whichever  comes  first.   A
              non-positive value will disable this and the terminal width will
              be used. (default: 78)

       timeout

              The timeout used when a lock is held (in  seconds),  a  negative
              value means no timeout. (default: 600)

       timeout.warn

              Time (in seconds) before a warning is printed about held lock. A
              negative value means no warning. (default: 0)

       traceback

              Mercurial always prints a traceback when  an  unknown  exception
              occurs.  Setting this to True will make Mercurial print a trace-
              back on all exceptions, even those recognized by Mercurial (such
              as IOError or MemoryError). (default: False)

       tweakdefaults

          By  default Mercurial's behavior changes very little from release to
          release, but over time the recommended config settings shift. Enable
          this  config to opt in to get automatic tweaks to Mercurial's behav-
          ior over time. This config setting will have no effect if HGPLAIN is
          set  or  HGPLAINEXCEPT  is  set  and does not include tweakdefaults.
          (default: False)

          It currently means:

          [ui]
          # The rollback command is dangerous. As a rule, don't use it.
          rollback = False
          # Make `hg status` report copy information
          statuscopies = yes
          # Prefer curses UIs when available. Revert to plain-text with `text`.
          interface = curses
          # Make compatible commands emit cwd-relative paths by default.
          relative-paths = yes

          [commands]
          # Grep working directory by default.
          grep.all-files = True
          # Refuse to perform an `hg update` that would cause a file content merge
          update.check = noconflict
          # Show conflicts information in `hg status`
          status.verbose = True
          # Make `hg resolve` with no action (like `-m`) fail instead of re-merging.
          resolve.explicit-re-merge = True

          [diff]
          git = 1
          showfunc = 1
          word-diff = 1

       username

              The committer of a  changeset  created  when  running  "commit".
              Typically  a  person's  name and email address, e.g. Fred Widget
              <fred@example.com>. Environment variables in  the  username  are
              expanded.

              (default:  $EMAIL  or username@hostname. If the username in hgrc
              is empty, e.g. if the system admin set username = in the  system
              hgrc,  it  has  to  be specified manually or in a different hgrc
              file)

       verbose

              Increase the amount of output printed. (default: False)

   web
       Web interface configuration. The settings in this section apply to both
       the  builtin  webserver  (started  by  hg serve) and the script you run
       through a webserver (hgweb.cgi and  the  derivatives  for  FastCGI  and
       WSGI).

       The  Mercurial webserver does no authentication (it does not prompt for
       usernames and passwords to validate who users  are),  but  it  does  do
       authorization (it grants or denies access for authenticated users based
       on settings in this section). You must either configure your  webserver
       to do authentication for you, or disable the authorization checks.

       For  a quick setup in a trusted environment, e.g., a private LAN, where
       you want it to accept pushes from anybody, you can  use  the  following
       command line:

       $ hg --config web.allow-push=* --config web.push_ssl=False serve

       Note  that  this  will allow anybody to push anything to the server and
       that this should not be used for public servers.

       The full set of options is:

       accesslog

              Where to output the access log. (default: stdout)

       address

              Interface address to bind to. (default: all)

       allow-archive

              List of archive format (bz2, gz, zip) allowed  for  downloading.
              (default: empty)

       allowbz2

              (DEPRECATED) Whether to allow .tar.bz2 downloading of repository
              revisions.  (default: False)

       allowgz

              (DEPRECATED) Whether to allow .tar.gz downloading of  repository
              revisions.  (default: False)

       allow-pull

              Whether to allow pulling from the repository. (default: True)

       allow-push

              Whether to allow pushing to the repository. If empty or not set,
              pushing is not allowed. If the special value *, any remote  user
              can push, including unauthenticated users. Otherwise, the remote
              user must have been authenticated, and  the  authenticated  user
              name  must  be  present  in  this  list.  The  contents  of  the
              allow-push list are examined after the deny_push list.

       allow_read

              If the user has not already been denied repository access due to
              the contents of deny_read, this list determines whether to grant
              repository access to the user. If this list is  not  empty,  and
              the  user  is  unauthenticated  or not present in the list, then
              access is denied for the user. If the list is empty or not  set,
              then  access  is  permitted  to  all  users  by default. Setting
              allow_read to the special value * is equivalent to it not  being
              set (i.e. access is permitted to all users). The contents of the
              allow_read list are examined after the deny_read list.

       allowzip

              (DEPRECATED) Whether to allow  .zip  downloading  of  repository
              revisions.  This  feature  creates  temporary  files.  (default:
              False)

       archivesubrepos

              Whether  to  recurse  into   subrepositories   when   archiving.
              (default: False)

       baseurl

              Base  URL  to  use  when  publishing URLs in other locations, so
              third-party tools like email notification  hooks  can  construct
              URLs. Example: http://hgserver/repos/.

       cacerts

              Path  to  file  containing  a  list  of  PEM encoded certificate
              authority certificates. Environment  variables  and  ~user  con-
              structs  are  expanded  in  the  filename.  If  specified on the
              client, then it will verify the identity of remote HTTPS servers
              with these certificates.

              To disable SSL verification temporarily, specify --insecure from
              command line.

              You can use OpenSSL's CA certificate file if your  platform  has
              one.  On  most Linux systems this will be /etc/ssl/certs/ca-cer-
              tificates.crt. Otherwise you will have  to  generate  this  file
              manually. The form must be as follows:

              -----BEGIN CERTIFICATE-----
              ... (certificate in base64 PEM encoding) ...
              -----END CERTIFICATE-----
              -----BEGIN CERTIFICATE-----
              ... (certificate in base64 PEM encoding) ...
              -----END CERTIFICATE-----

       cache

              Whether to support caching in hgweb. (default: True)

       certificate

              Certificate to use when running hg serve.

       collapse

              With  descend  enabled, repositories in subdirectories are shown
              at a single level alongside repositories in  the  current  path.
              With  collapse  also  enabled, repositories residing at a deeper
              level than the current path are grouped behind navigable  direc-
              tory  entries  that lead to the locations of these repositories.
              In effect, this setting collapses each collection  of  reposito-
              ries  found  within  a subdirectory into a single entry for that
              subdirectory. (default: False)

       comparisoncontext

              Number of lines of context to show in side-by-side file compari-
              son.  If  negative  or  the  value  full, whole files are shown.
              (default: 5)

              This setting can be overridden by a context request parameter to
              the comparison command, taking the same values.

       contact

              Name or email address of the person in charge of the repository.
              (default: ui.username or $EMAIL or "unknown" if unset or empty)

       csp

              Send a Content-Security-Policy HTTP header with this value.

              The value may contain a special string %nonce%,  which  will  be
              replaced  by  a  randomly-generated  one-time  use value. If the
              value contains %nonce%, web.cache will be disabled,  as  caching
              undermines  the  one-time property of the nonce. This nonce will
              also  be  inserted  into  <script>  elements  containing  inline
              JavaScript.

              Note:  lots  of  HTML content sent by the server is derived from
              repository data. Please consider  the  potential  for  malicious
              repository  data  to "inject" itself into generated HTML content
              as part of your security threat model.

       deny_push

              Whether to deny pushing to the repository. If empty or not  set,
              push is not denied. If the special value *, all remote users are
              denied push. Otherwise, unauthenticated users  are  all  denied,
              and  any  authenticated  user  name present in this list is also
              denied. The contents of the deny_push list are  examined  before
              the allow-push list.

       deny_read

              Whether  to deny reading/viewing of the repository. If this list
              is not empty, unauthenticated users  are  all  denied,  and  any
              authenticated  user  name  present  in  this list is also denied
              access to the repository. If set to the  special  value  *,  all
              remote  users  are denied access (rarely needed ;). If deny_read
              is empty or not set,  the  determination  of  repository  access
              depends  on the presence and content of the allow_read list (see
              description). If both deny_read and allow_read are empty or  not
              set,  then  access  is permitted to all users by default. If the
              repository is being served via hgwebdir, denied users  will  not
              be  able  to see it in the list of repositories. The contents of
              the deny_read list have priority over (are examined before)  the
              contents of the allow_read list.

       descend

              hgwebdir  indexes  will  not  descend  into subdirectories. Only
              repositories directly in the current path will be  shown  (other
              repositories are still available from the index corresponding to
              their containing path).

       description

              Textual description of the  repository's  purpose  or  contents.
              (default: "unknown")

       encoding

              Character  encoding  name. (default: the current locale charset)
              Example: "UTF-8".

       errorlog

              Where to output the error log. (default: stderr)

       guessmime

              Control MIME types for raw download of  file  content.   Set  to
              True  to  let  hgweb guess the content type from the file exten-
              sion. This will serve HTML files as text/html  and  might  allow
              cross-site  scripting  attacks  when serving untrusted reposito-
              ries. (default: False)

       hidden

              Whether to hide the repository in the hgwebdir index.  (default:
              False)

       ipv6

              Whether to use IPv6. (default: False)

       labels

              List of string labels associated with the repository.

              Labels are exposed as a template keyword and can be used to cus-
              tomize output. e.g. the  index  template  can  group  or  filter
              repositories  by  labels  and  the  summary template can display
              additional content if a specific label is present.

       logoimg

              File name of the logo image that some templates display on  each
              page.  The file name is relative to staticurl. That is, the full
              path to the logo image is "staticurl/logoimg".  If  unset,  hgl-
              ogo.png will be used.

       logourl

              Base  URL to use for logos. If unset, https://mercurial-scm.org/
              will be used.

       maxchanges

              Maximum number of changes to list on  the  changelog.  (default:
              10)

       maxfiles

              Maximum number of files to list per changeset. (default: 10)

       maxshortchanges

              Maximum  number  of  changes  to  list on the shortlog, graph or
              filelog pages. (default: 60)

       name

              Repository name to use in the web interface.  (default:  current
              working directory)

       port

              Port to listen on. (default: 8000)

       prefix

              Prefix path to serve from. (default: '' (server root))

       push_ssl

              Whether  to  require that inbound pushes be transported over SSL
              to prevent password sniffing. (default: True)

       refreshinterval

              How frequently directory listings re-scan the filesystem for new
              repositories,  in  seconds.  This is relevant when wildcards are
              used to define paths. Depending on how much filesystem traversal
              is required, refreshing may negatively impact performance.

              Values less than or equal to 0 always refresh.  (default: 20)

       server-header

              Value for HTTP Server response header.

       static

              Directory where static files are served from.

       staticurl

              Base  URL  to use for static files. If unset, static files (e.g.
              the hgicon.png favicon) will be served by the CGI script itself.
              Use  this  setting  to serve them directly with the HTTP server.
              Example: http://hgserver/static/.

       stripes

              How many lines a "zebra stripe" should span in  multi-line  out-
              put.  Set to 0 to disable. (default: 1)

       style

              Which  template  map style to use. The available options are the
              names of subdirectories in the HTML  templates  path.  (default:
              paper) Example: monoblue.

       templates

              Where  to  find the HTML templates. The default path to the HTML
              templates can be obtained from hg debuginstall.

   websub
       Web substitution filter definition. You can use this section to  define
       a  set  of regular expression substitution patterns which let you auto-
       matically modify the hgweb server output.

       The default hgweb templates only apply these substitution  patterns  on
       the  revision  description fields. You can apply them anywhere you want
       when you create your own templates by adding calls to the "websub" fil-
       ter (usually after calling the "escape" filter).

       This  can be used, for example, to convert issue references to links to
       your issue tracker, or to convert "markdown-like" syntax into HTML (see
       the examples below).

       Each  entry  in this section names a substitution filter.  The value of
       each entry defines the  substitution  expression  itself.   The  websub
       expressions follow the old interhg extension syntax, which in turn imi-
       tates the Unix sed replacement syntax:

       patternname = s/SEARCH_REGEX/REPLACE_EXPRESSION/[i]

       You can use any separator other than "/". The final "i" is optional and
       indicates that the search must be case insensitive.

       Examples:

       [websub]
       issues = s|issue(\d+)|<a href="http://bts.example.org/issue\1">issue\1</a>|i
       italic = s/\b_(\S+)_\b/<i>\1<\/i>/
       bold = s/\*\b(\S+)\b\*/<b>\1<\/b>/

   worker
       Parallel  master/worker  configuration.  We  currently  perform working
       directory updates in parallel on Unix-like systems, which greatly helps
       performance.

       enabled

              Whether to enable workers code to be used.  (default: true)

       numcpus

              Number  of  CPUs to use for parallel operations. A zero or nega-
              tive value is treated as use the default.  (default:  4  or  the
              number of CPUs on the system, whichever is larger)

       backgroundclose

              Whether  to  enable  closing  file handles on background threads
              during certain operations. Some platforms aren't very  efficient
              at  closing  file handles that have been written or appended to.
              By performing file closing on  background  threads,  file  write
              rate  can  increase  substantially.   (default: true on Windows,
              false elsewhere)

       backgroundcloseminfilecount

              Minimum number of files  required  to  trigger  background  file
              closing.   Operations  not  writing  this many files won't start
              background close threads.  (default: 2048)

       backgroundclosemaxqueue

              The maximum number of opened file handles waiting to  be  closed
              in the background. This option only has an effect if background-
              close is enabled.  (default: 384)

       backgroundclosethreadcount

              Number of threads to process background file closes. Only  rele-
              vant if backgroundclose is enabled.  (default: 4)

AUTHOR
       Bryan O'Sullivan <bos@serpentine.com>.

       Mercurial was written by Matt Mackall <mpm@selenic.com>.


ATTRIBUTES
       See attributes(7) for descriptions of the following attributes:


       +---------------+--------------------------------+
       |ATTRIBUTE TYPE |        ATTRIBUTE VALUE         |
       +---------------+--------------------------------+
       |Availability   | developer/versioning/mercurial |
       +---------------+--------------------------------+
       |Stability      | Committed                      |
       +---------------+--------------------------------+

SEE ALSO
       hg(1), hgignore(5)

COPYING
       This  manual  page  is  copyright  2005 Bryan O'Sullivan.  Mercurial is
       copyright 2005-2019 Matt Mackall.  Free use of this software is granted
       under  the  terms  of  the  GNU General Public License version 2 or any
       later version.

AUTHOR
       Bryan O'Sullivan <bos@serpentine.com>

       Organization: Mercurial



NOTES
       Source code for open source software components in Oracle  Solaris  can
       be found at https://www.oracle.com/downloads/opensource/solaris-source-
       code-downloads.html.

       This    software    was    built    from    source     available     at
       https://github.com/oracle/solaris-userland.    The  original  community
       source was downloaded from   https://www.mercurial-scm.org/release/mer-
       curial-5.1.1.tar.gz.

       Further information about this software can be found on the open source
       community website at http://mercurial-scm.org/.



                                                                       HGRC(5)