If the server is running the Oracle VM, you must mount the Oracle System Assistant USB flash drive before you use the file system to display or access its contents.
An example of how this command displays the storage devices on the server is shown below.
# lsscsi [0:0:0:0] disk SEAGATE ST360057SSUN600G 0805 /dev/sda [0:0:1:0] disk SEAGATE ST32000SSSUN2.0T 0313 /dev/sdb [0:0:2:0] disk SEAGATE ST32000SSSUN2.0T 0313 /dev/sdc [0:0:3:0] disk ATA INTEL SSDSA2BZ30 0362 /dev/sdd [0:0:4:0] enclosu ORACLE BLADE14 0903 - [7:0:0:0] disk SUN StorEdge 3511 421F /dev/sde [7:0:0:1] disk SUN StorEdge 3511 421F /dev/sdf [7:0:0:2] disk SUN StorEdge 3511 421F /dev/sdg [7:0:0:3] disk SUN StorEdge 3511 421F /dev/sdh [9:0:0:0] disk SUN CSM200_R 0660 /dev/sdi [9:0:0:1] disk SUN CSM200_R 0660 /dev/sdj [9:0:0:2] disk SUN CSM200_R 0660 /dev/sdk [9:0:0:3] disk SUN CSM200_R 0660 /dev/sdl [9:0:0:4] disk SUN CSM200_R 0660 /dev/sdm [9:0:0:5] disk SUN CSM200_R 0660 /dev/sdn [11:0:0:0] disk ORACLE SSM PMAP /dev/sdo
The Oracle System Assistant USB flash drive is the disk labeled ORACLE SSM and in this example is mapped to /dev/sdo.
The next example shows the output produced by this command.
# fdisk -l /dev/sdo Disk /dev/sdo: 3880 MB, 3880452096 bytes 4 heads, 32 sectors/track, 59211 cylinders Units = cylinders of 128 * 512 = 65536 bytes Device Boot Start End Blocks Id System /dev/sdo1 * 17 57344 3668992 ef EFI (FAT-12/16/32)
For example:
# mkdir /mnt/OSA
Here is an example of a mount command:
# mount -t vfat -o codepage=850 /dev/sdo1 /mnt/OSA # ls /mnt/OSA boot Firmware LiveOS OracleVM syslinux.cfg Documentation ldlinux.sys manifest.xml readme.html Versions.txt EFI Linux Oracle Solaris Windows #
The Oracle System Assistant USB flash drive is now mounted at the mount location specified.