When you use Oracle ILOM to deploy or manage the server, you can optionally modify the default network settings provided for the service processor (SP).
This procedure provides web and command-line interface (CLI) instructions for viewing and modifying the network settings that are assinged to the SP. For further details about this task, see the instructions below.
For instructions on how launch Oracle ILOM from the CLI or web interface, see: Accessing Oracle ILOM
For further details about how to configure the properties on the Network Settings page, click the More Details link.
For IPv4, type: show /SP/network
For IPv6, type: show /SP/network/ipv6
For IPv4, type: help /SP/network
For IPv6, type: help /SP/network/ipv6
IPv4 Example:
set /SP/network state=enabled|disabled pendingipdiscovery=static|dhcp pendingipaddress=value pendingipgateway=value pendingipnetmask=value
IPv6 Example:
set /SP/network/ipv6 state=enabled|disabled pending_static_ipaddress= value/ subnet_mask_value pending_static_ipgatewayaddress= value
Type: set /SP/network commitpending=true