Oracle^® X5 Series Servers Administration Guide

Modify Service Processor Network Settings (Oracle System Assistant)

Use this optional procedure to modify the default Oracle ILOM network settings.

1. Launch Oracle System Assistant.

   For instructions, see Accessing and Using Oracle System Assistant.

2. In the navigation pane, click configure Hardware, and then click the Service Processor Configuration tab.
3. Select Network Configuration in the drop-down list.
4. Specify the network settings:
   • For an IPv4 environment, do the following in the IPv4 panel:
     1. Select an IP Discovery Mode.
     2. If you selected Static, enter an IP Address, Netmask, and Gateway.
   • For an IPv6 environment, do the following in the IPv6 panel:
     1. Select Enabled in the IPv6 portion of the screen.
     2. Configure the remaining IPv6 properties as needed.

   For more information about the network properties, click the Help button.

5. Click Apply Settings.

   Some changes are applied immediately. Others will be applied at the next boot.