When servicing the components in this section, unplug the AC power cords and use ESD protection.
The system battery maintains system time when the server is powered off and disconnected from AC power. Use the following procedures to remove and replace the system battery when it has failed.
Caution - Ensure that all power is removed from the server before removing or installing the battery. You must disconnect the power cables from the system before performing these procedures. |
The battery is located toward the back of the server between PCIe slot 1 and the power supply side wall.
|
You might need to remove the card to access the battery.
Take care not to deform the tab when pushing against it.
Caution - Component damage. Do not deform the metal tab on the positive side of the battery. The metal tab maintains the positive battery connection and secures the battery in the holder. |
The positive side of the battery is marked with a plus sign (cross).
For instructions, see the Oracle Integrated Lights Out Manager 3.2 Documentation Library at: http://www.oracle.com/goto/ILOM/docs
Refer to BIOS Setup Utility Menu Options for information about using the BIOS Setup Utility.