Remove the SP Card (FRU)

When servicing the components in this section, unplug the AC power cords and use ESD protection.

Before You Begin

• For serviceability considerations, see Component Serviceability.

1. Prepare the server for service. See Prepare the Server for Cold Service.
2. Disconnect the SP card cable.

   The SP card is mounted on the motherboard between the two groups of PCIe slots.

   
   
3. Completely loosen the green captive screw on the top of the SP card.
4. To remove the SP card, disconnect it by pulling it upward and then lift it out of the server.
   

Next Steps

• Install the SP Card (FRU)