Go to main content

Oracle® Server X7-2 Service Manual

Exit Print View

Updated: April 2019
 
 

Verify BIOS Factory Default Settings

In the BIOS Setup Utility, you can return the BIOS settings to the optimal factory default values, as well as view and edit settings as needed. Any changes that you make in the BIOS Setup Utility (using the F2 key) persist until the next time you change the settings.

Before you begin, ensure that a console connection is established to the server.

  1. Reset or power on the server.

    For example, to reset the server:

    • From the local server, press the On/Standby button on the front panel of the server to power off the server, and then press the On/Standby button again to power on the server.

    • From the Oracle ILOM web interface, click Host Management → Power Control and select Reset from the Select Action list. Click Save, and then click OK.

    • From the Oracle ILOM CLI, type reset /System

  2. After the server resets and begins the initialization process, when prompted, press the F2 key to access the BIOS Setup Utility.
  3. To ensure that the factory defaults are set, do the following:
    • Press the F9 key to automatically load the optimal factory default settings.
    • In responses to the confirmation message to continue, highlight OK, and then press Enter.
  4. Press the F10 key to save the changes and exit the BIOS Setup Utility.

Related Information