Go to main content

Oracle® Server X7-2 Service Manual

Exit Print View

Updated: April 2019
 
 

Unmount an NVMe Storage Drive

  1. Log in to Oracle Solaris that is running on the server.
  2. To find the NVMe drive slot number, type:

    # hotplug list –lc

    This command produces output similar to the following for each of the NVMe drives installed in the server:

    # hotplug list –lc
    Connection  State    Description Path
    --------------------------------------------------------------------------------------- 
    Slot100     ENABLED  PCIe-Native /pci@13,0/pci8086,2030@0/pci111d,80b5@0/pci111d,80b5@5
  3. To prepare the NVMe drive for removal, that is, to detach the device driver and power off the drive slot, type the following commands:

    # hotplug poweroff Slot100

    # hotplug list –lc

    The following output appears for the NVMe drive that has been unmounted:

    # hotplug list –lc
    Connection  State    Description Path
    ---------------------------------------------------------------------------------------
    Slot100     PRESENT  PCIe-Native /pci@13,0/pci8086,2030@0/pci111d,80b5@0/pci111d,80b5@5
  4. Verify that the OK to Remove indicator (LED) on the NVMe storage drive is lit.