Go to main content

Oracle® Server X7-2 Service Manual

Exit Print View

Updated: January 2021
 
 

Remove a PCIe Card From PCIe Slot 1 or 2


Note -  PCIe slot 1 is nonfunctional in single-processor systems.
  1. Remove the PCIe riser from the server.

    See Remove a PCIe Riser From PCIe Slot 1 or 2.

  2. Remove the PCIe card from the PCIe riser.
    1. Hold the riser in one hand and use your other hand to carefully pull the PCIe card connector out of the riser.
    2. Disconnect the rear bracket that is attached to the PCIe card from the rear of the PCIe riser.

    image:Figure showing how to remove a PCIe card from the riser in PCIe                             slots 1 and 2.
  3. Place the PCIe card on an antistatic mat.

    Caution

    Caution  -  Whenever you remove a PCIe card, you should replace it with another PCIe card or a PCIe filler panel. Installing PCIe filler panels in vacant PCIe slots helps reduce the level of electromagnetic interference (EMI) emitted by the server. See Remove and Install Filler Panels.