Go to main content

Oracle® Server X7-2 Service Manual

Exit Print View

Updated: January 2019
 
 

Install an NVMe Storage Drive

Perform this procedure to physically install an NVMe storage drive into the server.

  1. Remove the replacement drive from its packaging and place the drive on an antistatic mat.
  2. If necessary, remove the drive filler panel.
  3. Align the replacement drive with the drive slot.

    The drive is physically addressed according to the slot in which it is installed. It is important to install a replacement drive in the same slot as the drive that was removed.

  4. Slide the drive into the slot until the drive is fully seated.

    See Install a Storage Drive.

  5. Close the drive latch to lock the drive in place.
  6. Power on the server.

    See Power On the Server.

Related Information