ZS3-4 Front Panel Components - The ZS3-4 controller drive slots and front panel components are shown in the following figure.
Figure 27 ZS3-4 Controller Front Panel
|
ZS3-4 Rear Panel Components - The following graphic shows the rear panel. Base configuration HBAs are not depicted in this illustration.
Figure 28 ZS3-4 Controller Rear Panel
|
Cluster Interface Card Compatibility - The ZS3-4 controller contains a Version 2 cluster interface card. This card cannot be replaced with a Version 3 cluster interface card.
For information about how to connect cables to form a cluster, see Connecting Cluster Cables in Oracle ZFS Storage Appliance Cabling Guide.
There are four RJ-45 Gigabit Ethernet connectors (NET0, NET1, NET2, NET3) located on the motherboard that operate at 10/100/1000 Mbit/sec. These network interfaces must be configured before use.
The network management connector (NET MGT) is an RJ-45 10/100 BASE-T Ethernet port and provides a LAN interface to the SP console.
Figure 29 ZS3-4 Controller Network Management Port
The serial management connector (SER MGT) is an RJ-45 connector and provides a terminal connection to the SP console.
Figure 30 ZS3-4 Controller Serial Management Port