Display Status for Specific Components

1. Access the Oracle ILOM CLI.

   See Accessing the SP.

2. If not already done, enable Oracle ILOM legacy targets.

   See Enable Oracle ILOM Legacy Targets.

3. For the type of component status, type the appropriate command.
   • For fault state, type:

     -> show target fault_state

     where target is from the table in Oracle ILOM Legacy Targets for Fault State and FRUID.

   • For FRUID, type:

     -> show target -d properties

     where the target capable of displaying FRUID is from the table in Oracle ILOM Legacy Targets for Fault State and FRUID.

   • For power, voltage, temperature, fan speed, or LED state of a component, type:

     -> show target value

     where target is from the tables in:

     • Oracle ILOM Legacy Targets for Power Consumption

     • Oracle ILOM Legacy Targets for Voltage

     • Oracle ILOM Legacy Targets for Temperature

     • Oracle ILOM Legacy Targets for Fan Speeds

     • Oracle ILOM Legacy Targets for LED States

4. If the output of the command indicates a fault or displays values outside normal operating parameters, replace the component indicated by the respective table.

   See Oracle ILOM Legacy Target Replaceable Components or Faulted Item Replaceable Components for a link to the service task for that component.

Related Information

• Enable Oracle ILOM Legacy Targets

• Clear a Fault Manually

• Oracle ILOM Legacy Targets for Fault State and FRUID

• Oracle ILOM Legacy Targets for Power Consumption

• Oracle ILOM Legacy Targets for Voltage

• Oracle ILOM Legacy Targets for Temperature

• Oracle ILOM Legacy Targets for Fan Speeds

• Oracle ILOM Legacy Targets for LED States

• Resettable Targets