After you install a fan module, you can verify its functionality.
-> set /SYS/FMx clear_fault_action=true
where x is 0 to 3. For example, to reset fan module FM1, type:
-> set /SYS/FM1 clear_fault_action=true Are you sure you want to clear /SYS/FM1 (y/n)? y Set 'clear_fault_action' to 'true' ->
See Locate a Faulty Fan Module, then return to this task.
-> show /SYS/FMx/FANy/TACH value
where x is 0 to 3 and y is 0 or 1. For example, to check the fan speed of FAN1 inside of fan module FM1, type:
-> show /SYS/FM1/FAN1/TACH value /SYS/FM1/FAN1/TACH Properties: value = 21040 rpm ->
Properly functioning fans should be operating at speeds between 6000 and 24000 RPM.