C
- cd command,
cd Command
- changing password
- ILOM user
- from CLI, Change an ILOM User’s Password and or Role (CLI)
- from web, Change an ILOM User’s Password and or Role (Web Interface)
root, Change the root Password
- user, Change a User’s Password
- chassis
- installing, Install the Chassis in the Rack
- preparing, Preparing the Chassis
- unpacking, Unpacking the Chassis
- unsecuring, Unsecure the Chassis From the Pallet
- checkfans command
- Check Fan Speed and Status
- Verify the Fabric Card Status
- Install a Fan
- checkfans Command
- checking
- CMC, Checking CMCs
- LEDs
- Check the Status LEDs of a CMC
- Check CMC Status LEDs
- power, Check Internal Power and Temperature of a CMC
- status, Check the Status of a CMC
- temperature, Check Internal Power and Temperature of a CMC
error messages, Checking Logs and Error Messages
- fabric card, Checking Fabric Cards
- fault, Check Fabric Card Power Faults
- IPMB state, Check the IPMB State of a Fabric Card
- LEDs
- Check the Status LEDs of a Fabric Card
- Check Fabric Card LEDs
- link status
- Check Fabric Card Link Status (Simple)
- Check Fabric Card Link Status (Detailed)
- power, Check the Internal Power and Temperature of a Fabric Card
- switch chip health, Check Fabric Card Switch Chip Health
- temperature
- Check the Internal Power and Temperature of a Fabric Card
- Check Fabric Card Internal Temperatures
- voltage, Check Fabric Card Internal Voltages
fan
- LEDs, Check Fan LEDs
- speed, Check Fan Speed and Status
- status, Check Fan Speed and Status
LEDs, Checking Status LEDs
- line card, Checking Line Cards
- fault, Check Line Card Power Faults
- IPMB state, Check the IPMB State of a Line Card
- LEDs
- Check the Status LEDs of a Line Card
- Check Line Card LEDs
- link status
- Check Line Card Link Status (Simple)
- Check Line Card Link Status (Detailed)
- power, Check the Internal Power and Temperature of a Line Card
- switch chip health, Check Line Card Switch Chip Health
- temperature
- Check the Internal Power and Temperature of a Line Card
- Check Line Card Internal Temperatures
- voltage, Check Line Card Internal Voltages
logs, Checking Logs and Error Messages
- port, Check All Ports
- power supply
- Checking Power Supplies
- Check the Status of a Power Supply
- LEDs, Check Power Supply LEDs
switch characteristics, Checking Other Switch Characteristics
- checklinks command
- Check Fabric Card Link Status (Simple)
- Check Fabric Card Link Status (Detailed)
- Check Line Card Link Status (Simple)
- Check Line Card Link Status (Detailed)
- Enable Downed Fabric Card Links
- Enable Downed Line Card Links
- Check Link Status
- checklinks Command
- checkpowers command, checkpowers Command
- checkpwrfault command
- Check Fabric Card Power Faults
- Check Line Card Power Faults
- Verify the Fabric Card Status
- Verify the Line Card Status
- checkpwrfault Command
- checkswitches command
- Check Fabric Card Switch Chip Health
- Check Line Card Switch Chip Health
- Verify the Fabric Card Status
- Verify the Line Card Status
- checkswitches Command
- checkvoltages command
- Check Fabric Card Internal Voltages
- Check Line Card Internal Voltages
- Verify the Fabric Card Status
- Verify the Line Card Status
- checkvoltages Command
- clear
- data counters, Clear Data Counters
- error counters, Clear Error Counters
- ILOM event log
- from CLI, Clear the ILOM Event Log (CLI)
- from web, Clear the ILOM Event Log (Web Interface)
- clearboardstat command, clearboardstat Command
- CLI
- adding
- ILOM user, Add an ILOM User Account (CLI)
- SNMP communities, Add SNMP Service Communities (CLI)
- SNMP users, Add SNMP Service User Accounts (CLI)
backing up
- ILOM configuration, Back Up the ILOM Configuration (CLI)
- SNMP MIBs, Back Up SNMP Service MIBs (CLI)
changing ILOM password, Change an ILOM User’s Password and or Role (CLI)
- clearing ILOM event log, Clear the ILOM Event Log (CLI)
- deleting
- ILOM user, Delete an ILOM User Account (CLI)
- SNMP communities, Delete SNMP Service Communities (CLI)
- SNMP users, Delete SNMP Service User Accounts (CLI)
disabling
- HTTP, Disable the HTTP Service (CLI)
- HTTPS, Disable the HTTPS Service (CLI)
- SNMP, Disable the SNMP Service (CLI)
displaying
- aggregate sensor, Display the State of the Aggregate Sensor (CLI)
- CLI timeout, Display the CLI Timeout (CLI)
- date, Display the Date (CLI)
- FRU information, Display Chassis FRU Information (CLI)
- help, Get Help on an ILOM Command (CLI)
- HTTP status, Display the HTTP Service Status (CLI)
- HTTPS status, Display the HTTPS Service Status (CLI)
- ILOM event log, Display the ILOM Event Log (CLI)
- ILOM sessions, Display the ILOM Sessions (CLI)
- ILOM users, Display the ILOM User Accounts (CLI)
- ILOM version, Display the ILOM Firmware Version (CLI)
- IPMI status, Display the IPMI Service Status (CLI)
- network management configuration, Display the Network Management Configuration (CLI)
- other aspects, Verifying Other Aspects (CLI)
- service status, Checking the Status of Services (CLI)
- SNMP communities, Display the SNMP Service Communities (CLI)
- SNMP status, Display the SNMP Service Status (CLI)
- SNMP users, Display the SNMP User Accounts (CLI)
- SSL certificates, Display the SSL Certificates (CLI)
- target properties, Get Help on an ILOM Target Property (CLI)
downloading switch firmware, Download the Switch Firmware Package (CLI)
- enabling
- HTTP, Enable the HTTP Service (CLI)
- HTTPS, Enable the HTTPS Service (CLI)
- SNMP, Enable the SNMP Service (CLI)
interface overview, CLI Overview
- managing
- HTTP, Managing HTTP Services (CLI)
- HTTPS, Managing HTTPS Services (CLI)
- SNMP, Managing SNMP Services (CLI)
performing
- daily tasks, Performing Daily Tasks (CLI)
- general tasks, Performing General Tasks on ILOM Targets (CLI)
- ILOM user tasks, Performing ILOM User Tasks (CLI)
restoring ILOM configuration, Restore the ILOM Configuration (CLI)
- setting
- CLI configuration, Set the CLI Configuration (CLI)
- date, Set the Date and Time (CLI)
- firmware configuration script, Set Component Firmware to Upgrade (CLI)
- network management configuration, Set the Network Management Parameters (CLI)
- SNMP configuration, Configure the SNMP Service (CLI)
SSL certificate
- installing, Install a Custom SSL Certificate (CLI)
- removing, Remove the Custom SSL Certificate (CLI)
upgrading switch firmware
- Upgrading the Switch Firmware Through ILOM (CLI)
- Upgrade the Switch Firmware (CLI)
- CLIA command overview, CLIA Command Overview
- clia commands, Understanding CLIA Commands
- CMC
- accessing, Accessing the CMC
- network management, Access the CMC From the Network Management Port
- serial management, Access the CMC From the Serial Management Port
activating, Activate a CMC
- addressing
- CMC Addressing
- CMC Addresses
- checking, Checking CMCs
- LEDs
- Check the Status LEDs of a CMC
- Check CMC Status LEDs
- power, Check Internal Power and Temperature of a CMC
- status, Check the Status of a CMC
- temperature, Check Internal Power and Temperature of a CMC
configuring identical addresses
- Reconfigure the CMCs for Identical Addresses
- Configure CMCs for Identical Addresses
- deactivating, Deactivate a CMC
- displaying
- firmware
- Display the Firmware Version of a CMC
- Display the Firmware Version of the Switch Chassis Manager
features, CMC Identification
- firmware
- installing, Install the ILOM Firmware
- layout, Firmware Layout
- rupgrade_tool, rupgrade_tool Application
- upgrading, Upgrading the Firmware
FRU ID
- Display the CMC FRU ID Information
- Power On a CMC
- inspecting, Inspecting the CMC
- connectors, Inspect the CMC Connectors
- hardware, Inspect the CMC Hardware
installing, Install a CMC
- LEDs, CMC Status LEDs
- managing, Managing CMCs
- powering off, Power Off a CMC
- powering on
- Powering On the CMCs
- Power On a CMC
- rebooting, Restart a CMC
- removing, Remove a CMC
- servicing, Servicing the CMCs
- setting host name, Change the CMC Host Name
- status, Verify the CMC Status
- switchover, Switch Over to Another CMC
- command
- activate
- Activate a CMC
- Activate a Fabric Card or Filler
- Activate a Line Card
- Power On the Fabric Cards
- Power On the Line Cards
- Power On a Fabric Card
- Power On a Line Card
- boot
- Change the CMC Host Name
- Reconfigure the CMCs for Identical Addresses
- Set the Initial UBoot Parameters
- Reperform Initial Setup
- Configure CMCs for Identical Addresses
- checkfans
- Check Fan Speed and Status
- Verify the Fabric Card Status
- Install a Fan
- checklinks
- Check Fabric Card Link Status (Simple)
- Check Fabric Card Link Status (Detailed)
- Check Line Card Link Status (Simple)
- Check Line Card Link Status (Detailed)
- Enable Downed Fabric Card Links
- Enable Downed Line Card Links
- Check Link Status
- checkpwrfault
- Check Fabric Card Power Faults
- Check Line Card Power Faults
- Verify the Fabric Card Status
- Verify the Line Card Status
- checkswitches
- Check Fabric Card Switch Chip Health
- Check Line Card Switch Chip Health
- Verify the Fabric Card Status
- Verify the Line Card Status
- checkvoltages
- Check Fabric Card Internal Voltages
- Check Line Card Internal Voltages
- Verify the Fabric Card Status
- Verify the Line Card Status
- clia, Understanding CLIA Commands
- activate, activate Command
- deactivate, deactivate Command
- exit, exit Command
- fru, fru Command
- frucontrol, frucontrol Command
- fruinfo, fruinfo Command
- getfruledstate, getfruledstate Command
- getipmbstate, getipmbstate Command
- getlanconfig, getlanconfig Command
- help, help Command
- ipmc, ipmc Command
- localaddress, localaddress Command
- poll, poll Command
- quit, quit Command
- sel, sel Command
- sensordata, sensordata Command
- session, session Command
- setextracted, setextracted Command
- setfruledstate, setfruledstate Command
- setipmbstate, setipmbstate Command
- setlanconfig, setlanconfig Command
- setlocked, setlocked Command
- shelf, shelf Command
- shelfaddress, shelfaddress Command
- shmstatus, shmstatus Command
- showunhealthy, showunhealthy Command
- switchover, switchover Command
- terminate, terminate Command
- user, user [-v] Command
- user add, user add Command
- user channel, user channel Command
- user delete, user delete Command
- user enable, user enable Command
- user name, user name Command
- user passwd, user passwd Command
- version, version Command
create
- Add an ILOM User Account (CLI)
- Add SNMP Service User Accounts (CLI)
- Add SNMP Service Communities (CLI)
- date
- Display the Date
- Set the Date
- deactivate
- Deactivate a CMC
- Deactivate a Fabric Card or Filler
- Deactivate a Line Card
- Power Off a Fabric Card
- Power Off a Line Card
- delete
- Delete an ILOM User Account (CLI)
- Delete SNMP Service User Accounts (CLI)
- Delete SNMP Service Communities (CLI)
- disableboard
- Disable a Fabric Card or Filler
- Disable a Line Card
- Power Off a Fabric Card
- Power Off a Line Card
- disablepsu
- Power Off a Power Supply
- Power Off a Power Supply
- disablestby
- Disable Standby Power for a Fabric Card or Filler
- Disable Standby Power for a Line Card
- disableswitchport
- Disable a Fabric Card Switch Chip Port
- Disable a Line Card Switch Chip Port
- dump, Back Up SNMP Service MIBs (CLI)
- enableboard
- Enable a Fabric Card or Filler
- Enable a Line Card
- enablehotinsert
- Enable a Fabric Card Slot for Hot-Insertion
- Enable a Line Card Slot for Hot-Insertion
- enablepsu
- Power On a Power Supply
- Power On a Power Supply
- enablestby
- Enable Standby Power for a Fabric Card or Filler
- Enable Standby Power for a Line Card
- Enable the Fabric Cards
- Enable the Line Cards
- Power On a Fabric Card
- Power On a Line Card
- enableswitchport
- Enable a Fabric Card Switch Chip Port
- Enable a Line Card Switch Chip Port
- findport, Locate a Switch Chip or Connector From the GUID
- fruinfo
- Display the CMC FRU ID Information
- Display the Power Supply FRU ID Information
- Display the Fabric Card FRU ID Information
- Display the Line Card FRU ID Information
- Display the InfiniBand Cable FRU ID Information
- getbaseguid
- Display the Base GUIDs of a Fabric Card
- Display the Base GUIDs of a Line Card
- Start the Subnet Manager With Fat Tree Routing
- Create the guid.txt File
- Create the guid.txt File for Installation
- Power Off a Fabric Card
- Power On a Fabric Card
- getfruledstate
- Check the Status LEDs of a CMC
- Check the Status LEDs of a Fabric Card
- Check the Status LEDs of a Line Card
- getfwversion
- Display the Firmware Versions of a Fabric Card
- Display the Firmware Versions of a Line Card
- Verify the Fabric Card Status
- Verify the Line Card Status
- getipmbstate
- Check the IPMB State of a Fabric Card
- Check the IPMB State of a Line Card
- getlanconfig, Display the Network Management Configuration
- getpsufwver, Display the Firmware Version of a Power Supply
- help
- Get Help on a CLIA Command
- Get Help on an ILOM Command (CLI)
- Get Help on an ILOM Target Property (CLI)
- i2ctest, Verify the CMC Status
- ibcheckerrors, Validate the InfiniBand Fabric and Report Errors
- ibcheckstate, Check All Ports
- ibclearcounters, Clear Data Counters
- ibclearerrors, Clear Error Counters
- ibdatacounts, Display Data Counters for a Node
- ibdiagnet
- Perform Comprehensive Diagnostics for the Entire Fabric
- Find 1x or SDR or DDR Links in the Fabric
- Determine Which Links Are Experiencing Significant Errors
- Perform Diagnostics on the InfiniBand Fabric
- ibdiagpath, Perform Comprehensive Diagnostics for a Route
- ibhosts, Identify All HCAs in the Fabric
- ibnetdiscover
- Display the InfiniBand Fabric Topology
- Discover the InfiniBand Fabric Topology
- ibportstate
- Display the Link Status of a Node
- Reset a Port
- Set the Speed of a Port
- Disable a Port
- Enable a Port
- ibswitches
- Identify All Switches in the Fabric
- Determine the GUID and LID for a Node Within the Switch
- Change the CMC Host Name
- ibtracert, Display a Route Through the Fabric
- ibv_devinfo, Display Information About the Local HCA
- ILOM
- cd, cd Command
- create, create Command
- delete, delete Command
- dump, dump Command
- exit, exit Command
- help, help Command
- load, load Command
- set, set Command
- show, show Command
- version, version Command
InfiniBand software, Understanding InfiniBand Software Commands
- ib_read_bw, ib_read_bw Command
- ib_read_lat, ib_read_lat Command
- ib_send_bw, ib_send_bw Command
- ib_send_lat, ib_send_lat Command
- ib_write_bw, ib_write_bw Command
- ib_write_lat, ib_write_lat Command
- ibaddr, ibaddr Command
- ibcheckerrors, ibcheckerrors Command
- ibchecknet, ibchecknet Command
- ibchecknode, ibchecknode Command
- ibcheckport, ibcheckport Command
- ibcheckportstate, ibcheckportstate Command
- ibcheckportwidth, ibcheckportwidth Command
- ibcheckstate, ibcheckstate Command
- ibcheckwidth, ibcheckwidth Command
- ibclearcounters, ibclearcounters Command
- ibclearerrors, ibclearerrors Command
- ibdatacounters, ibdatacounters Command
- ibdatacounts, ibdatacounts Command
- ibdiagnet, ibdiagnet Command
- ibdiagpath, ibdiagpath Command
- ibhosts, ibhosts Command
- ibnetdiscover, ibnetdiscover Command
- ibnodes, ibnodes Command
- ibping, ibping Command
- ibportstate, ibportstate Command
- ibroute, ibroute Command
- ibrouters, ibrouters Command
- ibstat, ibstat Command
- ibstatus, ibstatus Command
- ibswitches, ibswitches Command
- ibsysstat, ibsysstat Command
- ibtracert, ibtracert Command
- ibv_devices, ibv_devices Command
- ibv_devinfo, ibv_devinfo Command
- ibv_rc_pingpong, ibv_rc_pingpong Command
- ibv_srq_pingpong, ibv_srq_pingpong Command
- ibv_uc_pingpong, ibv_uc_pingpong Command
- ibv_ud_pingpong, ibv_ud_pingpong Command
- ofed_info, ofed_info Command
- opensm, opensm Command
- opensmd, opensmd Daemon
- osmtest, osmtest Command
- perfquery, perfquery Command
- saquery, saquery Command
- sminfo, sminfo Command
- smpdump, smpdump Command
- smpquery, smpquery Command
- vendstat, vendstat Command
load
- Install a Custom SSL Certificate (CLI)
- Upgrade the Switch Firmware (CLI)
- localaddress, Power On a CMC
- mcmversion, Display the Firmware Version of the Switch Chassis Manager
- ofed_info, Display OFED Software Version Information
- opensm
- Start the Subnet Manager With Min Hop Routing
- Start the Subnet Manager With Fat Tree Routing
- Create the guid.txt File
- Create the guid.txt File for Installation
- Power Off a Fabric Card
- Power On a Fabric Card
- opensmd
- Start the Subnet Manager With the opensmd Daemon
- Stop the Subnet Manager With the opensmd Daemon
- osmtest
- Map LIDs to GUIDs
- Determine Changes to the InfiniBand Fabric Topology
- passwd, Change the root Password
- perfquery, Display Counters for a Node
- printenv, Set the Initial UBoot Parameters
- psustatus
- Check the Status of a Power Supply
- Verify the Power Supply Status
- Power On a Power Supply
- reboot
- Reconfigure the CMCs for Identical Addresses
- Restart a CMC
- Set the Initial UBoot Parameters
- Reperform Initial Setup
- Configure CMCs for Identical Addresses
- resetswitch
- Reset a Fabric Card Switch Chip
- Reset a Line Card Switch Chip
- saveenv
- Change the CMC Host Name
- Reconfigure the CMCs for Identical Addresses
- Set the Initial UBoot Parameters
- Reperform Initial Setup
- Configure CMCs for Identical Addresses
- sel, Display the System Event Log
- sensordata
- Check Internal Power and Temperature of a CMC
- Check the Internal Power and Temperature of a Fabric Card
- Check the Internal Power and Temperature of a Line Card
- session, Display the Active Sessions
- setenv
- Change the CMC Host Name
- Reconfigure the CMCs for Identical Addresses
- Set the Initial UBoot Parameters
- Reperform Initial Setup
- setfruledstate
- Turn On a Fabric Card or Filler Locator LED
- Turn Off a Fabric Card or Filler Locator LED
- Turn On a Line Card Locator LED
- Turn Off a Line Card Locator LED
- setlanconfig
- Reconfigure the Network Management Parameters
- Reconfigure the CMCs for Identical Addresses
- Access the CMC From the Network Management Port
- Power On a CMC
- Reperform Initial Setup
- shmstatus
- Check the Status of a CMC
- Verify the CMC Status
- showlogs
- Display the Switch Message Log for Power Supplies
- Display the Switch Message Log for Fabric Cards
- Display the Switch Message Log for Line Cards
- showpresent
- Display Components Present
- Display Power Supplies Present
- Display Fabric Cards Present
- Display Line Cards Present
- Verify the CMC Status
- Verify the Fabric Card Status
- Verify the Line Card Status
- Power On a Power Supply
- showtemps
- Check Fabric Card Internal Temperatures
- Check Line Card Internal Temperatures
- showunhealthy, Display the General Health of the Switch
- showvoltages
- Check Fabric Card Internal Voltages
- Check Line Card Internal Voltages
- sminfo, Display Subnet Manager Status
- smpquery
- Display Low-Level Detailed Information About a Node
- Display Low-Level Detailed Information About a Port
- switch-specific, Understanding Switch-Specific Commands
- activate, activate Command
- checkfans, checkfans Command
- checklinks, checklinks Command
- checkpowers, checkpowers Command
- checkpwrfault, checkpwrfault Command
- checkswitches, checkswitches Command
- checkvoltages, checkvoltages Command
- clearboardstat, clearboardstat Command
- deactivate, deactivate Command
- disableboard, disableboard Command
- disablepsu, disablepsu Command
- disablestby, disablestby Command
- disableswitchport, disableswitchport Command
- enableboard, enableboard Command
- enablehotinsert, enablehotinsert Command
- enablepsu, enablepsu Command
- enablestby, enablestby Command
- enableswitchport, enableswitchport Command
- env_test, env_test Command
- findport, findport Command
- getbaseguid, getbaseguid Command
- getboardstat, getboardstat Command
- getfwversion, getfwversion Command
- getportcounters, getportcounters Command
- getportstatus, getportstatus Command
- getpsufwver, getpsufwver Command
- getserialnumbers, getserialnumbers Command
- getsymerr, getsymerr Command
- i2ctest, i2ctest Command
- m9diag, m9diag Command
- mcmversion, mcmversion Command
- psustatus, psustatus Command
- resetswitch, resetswitch Command
- selectdebugport, selectdebugport Command
- setlinkspeed, setlinkspeed Command
- showlogs, showlogs Command
- showpresent, showpresent Command
- showtemps, showtemps Command
- showvoltages, showvoltages Command
switchover
- Reconfigure the CMCs for Identical Addresses
- Switch Over to Another CMC
- Power Off a CMC
- Power On a CMC
- telnet
- Reconfigure the Network Management Parameters
- Access the CMC From the Network Management Port
- Reperform Initial Setup
- user, Display the User Accounts
- user add
- Add a User
- Power On a CMC
- user delete, Delete a User
- user passwd, Change a User’s Password
- version
- Display the Firmware Version of a CMC
- Display the ILOM Firmware Version (CLI)
- Power On a CMC
- command reference, Command Reference
- component
- addressing
- Understanding the Component Addressing Scheme
- Component Addressing
- inspecting, Inspecting the Components
- installing, Installing the Components
- connecting InfiniBand cables, Connecting InfiniBand Cables
- connector
- CXP, CXP Connector and Pins
- InfiniBand cable, CXP Connector and Pins
- network management, Network Management Connector and Pins
- serial management, Serial Management Connector and Pins
- controlling
- ILOM targets
- from CLI, Controlling ILOM Targets (CLI)
- from web, Controlling ILOM Targets (Web Interface)
InfiniBand fabric, Controlling the InfiniBand Fabric
- Subnet Manager, Controlling the Subnet Manager
- switch, Controlling the Switch
- create command
- Add an ILOM User Account (CLI)
- Add SNMP Service User Accounts (CLI)
- Add SNMP Service Communities (CLI)
- create Command
- creating
- guid.txt file, Create the guid.txt File for Installation
- opensm.conf file, Create the opensm.conf File
- CXP connector, CXP Connector and Pins
- addressing
- Line Card CXP Connector Addressing
- Connector Addressing
- mapping
- from GUID, Locate a Switch Chip or Connector From the GUID
- to switch chip, CXP Connectors and LEDs to Line Card Switch Chip and Port Routes
