HDDs and SSDs are hot-swappable and can be removed and installed while the storage controller is running without affecting other hardware capabilities. Use the following procedure to replace a ZS4-4 HDD or SSD. For information on disk compatibility, see the Oracle Systems Handbook.
If you are not physically at the system, go to the Maintenance > Hardware section of the BUI, click the right-arrow icon for the controller, and note the ID of the faulted drive, which has an amber icon. To highlight the location of the drive in the controller picture, click on the drive ID. To view details about the faulted drive, click its information icon and then click Active Problems.
If you are physically at the system, the amber Service action required
indicator on the HDD or SSD should be lit. Additionally, you can click the
locator icon
in the BUI to flash the locator indicator on the
faulted drive.
The Oracle ZFS Storage Appliance software automatically detects and configures the new drive.