Locating a Failed Component (CLI)

Language:

Use the following procedure to locate a failed component using the CLI.

Go to the maintenance hardware context:
```
hostname:> maintenance hardware
```

List the appliance components:

hostname:maintenance hardware> list
             NAME        STATE       MODEL             SERIAL      
chassis-000  hostname    ok          Sun Storage 7320  unknown     
chassis-001  000000000C  faulted     J4410             000000000C

Select the chassis and list its components:

hostname:maintenance hardware> select chassis-001
hostname:maintenance chassis-001> list
                         disk
                          fan
                          psu
                         slot

Select the component type and show all available disks:

hostname:maintenance chassis-001> select disk
hostname:maintenance chassis-001 disk> show
Disks:
          LABEL   STATE       MANUFACTURER  MODEL             SERIAL      
disk-000  HDD 0   ok          ST3500630NS   ST3500630NS       9QG1ACNJ    
disk-001  HDD 1   faulted     ST3500630NS   ST3500630NS       9QG1A77R    
disk-002  HDD 2   ok          ST3500630NS   ST3500630NS       9QG1AC3Z    
disk-003  HDD 3   ok          ST3500630NS   ST3500630NS       9QG1ACKW    
disk-004  HDD 4   ok          ST3500630NS   ST3500630NS       9QG1ACKF    
disk-005  HDD 5   ok          ST3500630NS   ST3500630NS       9QG1ACPM    
disk-006  HDD 6   ok          ST3500630NS   ST3500630NS       9QG1ACRR    
disk-007  HDD 7   ok          ST3500630NS   ST3500630NS       9QG1ACGD    
disk-008  HDD 8   ok          ST3500630NS   ST3500630NS       9QG1ACG4    
disk-009  HDD 9   ok          ST3500630NS   ST3500630NS       9QG1ABDZ    
disk-010  HDD 10  ok          ST3500630NS   ST3500630NS       9QG1A769    
disk-011  HDD 11  ok          ST3500630NS   ST3500630NS       9QG1AC27    
disk-012  HDD 12  ok          ST3500630NS   ST3500630NS       9QG1AC41    
disk-013  HDD 13  ok          ST3500630NS   ST3500630NS       9QG1ACQ5    
disk-014  HDD 14  ok          ST3500630NS   ST3500630NS       9QG1ACKA    
disk-015  HDD 15  ok          ST3500630NS   ST3500630NS       9QG1AC5Y    
disk-016  HDD 16  ok          ST3500630NS   ST3500630NS       9QG1ACQ2    
disk-017  HDD 17  ok          ST3500630NS   ST3500630NS       9QG1A76S    
disk-018  HDD 18  ok          ST3500630NS   ST3500630NS       9QG1ACDY    
disk-019  HDD 19  ok          ST3500630NS   ST3500630NS       9QG1AC3Y    
disk-020  HDD 20  ok          ST3500630NS   ST3500630NS       9QG1ACG6    
disk-021  HDD 21  ok          ST3500630NS   ST3500630NS       9QG1AC3X    
disk-022  HDD 22  ok          ST3500630NS   ST3500630NS       9QG1ACHL    
disk-023  HDD 23  ok          ST3500630NS   ST3500630NS       9QG1ABLW

Note - The RPM (revolutions per minute) of the disk drive is also shown in the output. However, RPM is truncated in the above example.

Select the faulted disk and turn on the locator LED:

hostname:maintenance chassis-001 disk> select disk-001
hostname:maintenance chassis-001 disk-001> set locate=true
                       locate = true (uncommitted)
hostname:maintenance chassis-001 disk-001> commit