Adding FC Devices
The following table lists the common commands used when adding and removing FC
devices.
|
|
|
|
cfgadm and cfgadm_fp
|
Dynamically reconfigures devices and FC devices. These commands
are used most frequently to configure storage devices on a
SAN.
|
|
|
fcinfo
|
Collects administrative information on fibre channel Host Bus
Adapters (HBA) ports on a host.
|
|
|
format
|
Identifies devices that are connected to the system and provides
the ability to label a disk.
|
|
|
luxadm
|
Administers storage devices and FC_AL devices.
|
|
|
Note -
If you use the format command when the multipathing features
are enabled, you will see only one instance of a device identifier for each LUN.
Without the multipathing features enabled, you will see one identifier for each
path.