Go to main content

Oracle® ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 3.2.x

Exit Print View

Updated: April 2018
 
 

Modify KVMS Maximum Client Session Count (Optional)

Oracle ILOM, by default, permits you to launch up to four video client sessions on an SP from the Remote Redirection web page. Optionally, you can limit the number of video client sessions on an SP by modifying the KVMS Maximum Client Session Count property in the CLI or web interface. For further details, see the following information.

Before You Begin

  • Console (c) role privileges must be enabled in Oracle ILOM to modify the KVMS Maximum Client Session Count property.

  • To prevent other signed-in video session users on the SP from viewing confidential information entered by a primary video session user, the Maximum Client Session Count property value must be set to 1.

  • Upon resetting the Maximum Client Session Count property in Oracle ILOM, all active Oracle ILOM Remote System Console Plus video sessions on the SP will be terminated.

  1. To modify the Maximum Client Session Count property, follow the instructions below for the preferred Oracle ILOM interface.
    Oracle ILOM Interface
    Instructions
    Web
    1. Navigate to the Remote Console > KVMS page.

    2. In the KVMS page, modify the Maximum Client Session Count property value.

      Note -  The minimum client video session value is 1. The default maximum client video session value is 4.

    3. Click Save.

      A warning message appears to inform you that changing the Maximum Client Session Count property will cause all active remote console video sessions on the SP to terminate.

    4. Click Yes to proceed; or, click No to cancel the operation.

    CLI
    1. Type:

      set /SP/services/kvms max_session_count=[1|2|3|4(default)]

      A warning message appears to inform you that changing the Maximum Client Session Count property will cause all active remote console video sessions on the SP to terminate.

    2. Type "y" to proceed; or, type "n" to cancel the operation.

  2. After modifying the Maximum Client Session Count, relaunch the Oracle ILOM Remote Console Plus from the Remote Control > Redirection web page.

    For further details, see Launch and Use the Oracle ILOM Remote System Console Plus.