Oracle^® ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 3.2.x

Make DCUs Available For Assignment

Before You Begin

• The Admin (a) role is required to modify Host DCU assignments.

• You can make DCUs "available for assignment" to a host at any time, regardless of the Host and DCU state.

• To make DCUs "unavailable for assignment" to a host, the DCUs must not be assigned (in use) by the host.

To make DCUs available for assignment, follow these steps:

1. Determine the DCU availability for each PDomain host by performing one of the following:
   • Web: Click the System Management > Domains.

     In the Host Configuration table of the Domains page, view the Assignable DCU column for each host.

   • CLI: Type the following command string:

     show /Servers/PDomains/PDomain_n/host

     View the dcus_available = property under the host target.

     For further details about the CLI properties shown for a host target, type:

     help /Servers/PDomains/PDomain_n/host

2. To control which DCUs can be assigned to a PDomain host, perform one of the following:
   • Web: In the Host Configuration table, select a host and then click Configure.

     For further instructions, click the More details ... link on the System Management > Domains page.

   • CLI: Type the following command string:

     set /Servers/PDomains/PDomain_n/host dcus_assignable= [/SYS/DCUn]