Go to main content

Oracle® ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 3.2.x

Exit Print View

Updated: April 2018
 
 

Control Message Acceptance Behavior for Login Message

  • To control the message acceptance behavior for the Login message, perform the applicable Web or CLI step(s):
    • Web: Set the applicable message acceptance behavior:
      • To prompt for acceptance:
        1. Select the check box for Login Message Acceptance Enabled.

          When the Enabled check box is selected, the user is prompted to accept the conditions of the Login message by clicking Accept or Logout. Clicking Accept will continue the login process and clicking Logout will exit the login process.

        2. Click Save.
      • To continue without acceptance:
        1. Clear the check box for Login Message Acceptance Enabled.

          When the Enabled check box is cleared, the user is prompted to continue the login process by clicking OK. The Enabled check box is cleared by default.

        2. Click Save.
    • CLI: Type the following command string to set the applicable message acceptance behavior:

      set /[SP | CMM]/preferences/banner/login message_acceptance= [enabled | disabled]

      where:

      • SP = Server SP management

      • CMM = Chassis management (Chassis Monitoring Module)

      • enabled = User is prompt to accept the conditions of the Login message by clicking Accept or Logout.

      • disabled = User is prompted to continue the login process by clicking OK.