Go to main content

Oracle® ILOM Administrator's Guide for Configuration and Maintenance Firmware Release 3.2.x

Exit Print View

Updated: April 2018
 
 

Reset Zoning Allocations to Factory Defaults (CLI)

Before You Begin

  • Admin (a) role privileges are required in Oracle ILOM to modify Sun Blade Zone Manager properties.


Caution

Caution  -  Use this procedure only if you want to erase all currently saved SAS zoning allocations in Oracle ILOM.


  1. Navigate to /STORAGE/sas_zoning in the CMM CLI by using the following command:

    -> cd /STORAGE/sas_zoning

  2. To erase all saved resource allocations and reset the Sun Blade Zone Manager to factory defaults, type:

    -> set reset_access_action=true

    If the Zone Manager is disabled, you will get the following warning:

    set: The CMM is not the SAS Zone Manager

    If you receive this message, enable Zone Manager and re-issue the reset command. For details, see Access and Enable Sun Blade Zone Manager .