Sun Blade
Zone Manager CLI: Targets and Properties
The Oracle
ILOM CMM CLI provides access to zoning targets and properties under the /STORAGE/sas_zoning namespace.
|
|
|
|
zone_management_state= |
disabled |enabled |
Disabled |
When set to disabled, the
Sun Blade Zone Manager is unable to manage the SAS-2 chassis storage resources.
When set to enabled, the Sun Blade Zone Manager provides template-based
or custom zoning capabilities for chassis-installed SAS-2 resources. |
reset_password_action= |
true |
|
When set to true, the in-band
management zoning password on the CMM is set to factory defaults
(all zeros). |
reset_access_action= |
true |
|
When set to true, the storage resource
allocation parameters currently saved on the CMM are set to factory
defaults. |
|
When zoning is enabled, blades and NEMs that are SAS-2 capable
appear as CLI targets under /STORAGE/sas_zoning.
For example:
-> show /STORAGE/sas_zoning
Targets
BL0
BL6
BL7
BL8
BL9
NEM0
NEM1
Properties
zone_management_state = enabled
reset_password_action = (Cannot show property)
reset_access_action = (Cannot show property)
Commands:
cd
set
show
Note - NEM0 and NEM1 targets appear in the Zone Manager when
these NEMs are installed; however, external SAS connections in the
Sun Blade Zone Manager are not supported at this time.
SAS-2 capable storage devices on a blade server appear as
targets under sas_zoning/BLn.
For example:
-> show /STORAGE/sas_zoning/BL9
Targets:
HDD0
HDD2
HDD3
HDD5
The SAS zoning properties that are available under the blade
target (BLn) or storage device (HDDn)
target include:
|
|
|
add_storage_access= |
/BLn |
Use the add_storage_access=property under the /sas_zoning/BLn target to
allocate storage to a CPU blade server. |
remove_storage_access= |
/BLn |
Use the remove_storage_access= property
under the /sas_zoning/BLn target
to remove storage from a CPU blade server. |
add_host_access= |
/BLn/HDDn |
Use the add_host_access= property
under the /sas_zoning/BLn/HDDn target
to allocate storage to a CPU blade server. |
remove_host_access= |
/BLn/HDDn |
Use the remove_host_access= property
under the /sas_zoning/BLn/HDDn target
to remove storage from a CPU blade server. |
|
For further instructions on how to manage storage resource
allocations from the Oracle ILOM CLI, see: