Management Services and Network Default Properties

Language:

To help make the process for deploying a server simple and straightforward, Oracle ILOM is shipped preconfigured with most management service ports and standard network connectivity properties enabled. However, to maximize security and to prevent unauthorized access to Oracle ILOM, you should disable properties for any management service ports that are not required.

Note - The default properties in Oracle ILOM are customer-configurable after establishing a management connection to Oracle ILOM.

Figure 3, Table 3, Management Services Enabled by Default Management Services Enabled by Default
Figure 4, Table 4, Network Connectivity Properties Enabled by Default Network Connectivity Properties Enabled by Default

Table 3 Management Services Enabled by Default

Management Access	Default Properties	Service Port	To modify configurable properties, see;
Web Server: Mode	Redirect HTTP Connection to HTTPS	80	Figure 38, Table 38, Web Server Configuration Properties
Web Server: State	HTTPS, Enabled	443	Figure 38, Table 38, Web Server Configuration Properties
Web Server: SSL	Later firmware versions of Oracle ILOM (3.2.4.x, 3.2.5.x, 3.2.6.x and forward) TLSv1, v2, and v3 Enabled Default SSL certificate Default SSL self-signing private key	-	Figure 39, Table 39, SSL Certificate and Private Key Configuration Properties for HTTPS Web Server
IPMI: State	Enabled	623	Figure 42, Table 42, IPMI Service Configuration Properties Note. For a higher level of security, Oracle ILOM IPMI clients should always support and operate in IPMI 2.0 mode.
SNMP: State	SNMPv3, Enabled	161	Figure 40, Table 40, SNMP Configuration Properties
Single Sign On	Enabled	11626	Single Sign-On Service (Enabled by Default)
Secure Shell (SSH)	Enabled RSA and DSA Key Generation	22	Figure 41, Table 41, SSH Server Configuration Properties
Remote KVMS Redirection (video, keyboard, mouse, and storage)	Enabled	5120-5123, 5555, 5556, 7578, 7579	Using Remote KVMS Consoles for Host Server Redirection
Service tag An Oracle discovery protocol that identifies servers and provides integration to Oracle service solutions.	Enabled	6481	To modify the service tag property, type: `set /SP/services/servicetag state=enabled\|disabled`

Note - For a complete list of default network ports used by Oracle ILOM, see Default Network Ports Used by Oracle ILOM.

Table 4 Network Connectivity Properties Enabled by Default

Network Connectivity Property	Default Value	To modify configurable properties, see:
Network: State	Enabled	Figure 45, Table 45, Network Connectivity Standard Configuration Properties
IPv4: Mode	DHCP, enabled
IPv6: State	Enabled	Figure 45, Table 45, Network Connectivity Standard Configuration Properties
IPv6: Mode	Auto-Config, Stateless
Management Port:	Dedicated Network Management (MGMT)	Figure 45, Table 45, Network Connectivity Standard Configuration Properties
Local Host Interconnect	Host Utilities Managed: Enabled State: Disabled	Dedicated Interconnect SP Management Connection
DNS	Auto DNS via DHCP, Enabled	Figure 47, Table 47, DNS Configuration Properties
Serial Port	Owner: Service Processor Baud Rate: 9600 Host Flow Control: None	Figure 48, Table 48, Serial Port Configuration Properties
User Authentication The property states for LDAP, RADIUS, and Active Directory are, by default, disabled.	Root user account: root Root password: `changeme` Permitted local accounts: Up to 10 customer-configurable user accounts Single Sign On: Enabled for remote KVMS and CMM blade navigation (drill-down).	Managing User Credentials