Powering On the Switch

Language:

These topics describe how to power on the switch for the first time.

Description	Links
Retrieve the power cords and SER MGT cable.	Retrieve the Power Cords and SER MGT Cable
Connect the serial management device.	Connect the SER MGT Cable Connect a Serial Management Device to the SER MGT Port
Connect the power cords.	Connect the Power Cords
If you have a full-time SER MGT connection, install the air duct.	Install the Air Duct Assembly
Power on the switch.	Power On the Switch
If you are not using DHCP-assigned IP addresses, log in to the service processor (SP) through the SER MGT connection.	Log In to the SP (SER MGT)
Assign a static IP address to the SP	Assign a Static IP Address to the SP
Assign a static IP address to the SCP	Assign a Static IP Address to the SCP
Log in to the SP again	Log In to the SP (Network Management)