lmrc - LSI MegaRAID SAS 3.0 Controller HBA driver
scsi@unit-address
The lmrc MegaRAID SAS 3.0 controller host bus adapter driver is a SCSA-compliant nexus driver that supports the LSI SAS 3108 series of controllers running MegaRAID firmware.
Some of the RAID features include the following:
RAID levels 0, 1, 5, and 6
RAID spans 10, 50, and 60
Online Capacity Expansion (OCE)
Online RAID Level Migration (RLM)
Auto resume on rebuild
Auto resume on reconstruction
Configurable stripe size up to 1 MB
Check consistency for background data integrity
Patrol read for media scanning and repairing
64 logical drive support
Up to 64 TB LUN support
Automatic rebuild
Global and dedicated Hot Spare support
The lmrc driver has different version on X86 and SPARC platform. The lmrc driver in X86 platform is a SCSAv3 compliant driver.
Configure your hardware through the related BIOS utility or the Raidconf Configuration Utility. If you want to install to a drive attached to a lmrc HBA, create the virtual drive first from the BIOS (x86) before starting the Oracle Solaris installation process.
The lmrc.conf file does not contain user editable parameters.
64-bit kernel module x86 ELF kernel module
64-bit SPARC ELF kernel module
Driver configuration file containing one user-configurable option. This file is not editable.
See attributes(7) for descriptions of the following attribute:
|
sata(4D), attributes(7), prtconf(8), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_device(9S), scsi_inquiry(9S), scsi_pkt(9S)