Go to main content

SPARC M8 and SPARC M7 Servers Installation Guide

Exit Print View

Updated: September 2017
 
 

Required Oracle ILOM Network Addresses

The SPs do not support DHCP. Assign static network addresses to SP0, SP1, and Active_SP so that you can access the Oracle ILOM firmware over a network connection, either using the web interface or the command line interface.


Note -  Assign static network addresses to the PDomain SPM hosts (HOSTx) if you require the PDomains to support the rKVMS functionality. These addresses are not required to access the SPs over the network.
SP Component
Description
SP0
The NET MGT 0 port on SP0.
SP1
The NET MGT 0 port on SP1.
Active_SP
The IP address for the Active SP. If the Active SP fails, the Standby SP will be assigned this address.
HOST0
The IP address for the PDomain0-SPM host.
HOST1
The IP address for the PDomain1-SPM host (if your server configuration includes two or more PDomains).
HOST2
The IP address for the PDomain2-SPM host (if your SPARC M7-16 server configuration includes three or more PDomains).
HOST3
The IP address for the PDomain3-SPM host (if your SPARC M7-16 server configuration includes four PDomains).

Related Information