Go to main content

SPARC M8 and SPARC M7 Servers Installation Guide

Exit Print View

» ...Documentation Home » SPARC M8 and SPARC M7 Series Servers ... » SPARC M8 and SPARC M7 Servers Installation Guide » Preparing the Site » Reviewing the Physical Specifications » Rackmounted Server Turning Radius

Updated: September 2017

SPARC M8 and SPARC M7 Servers Installation Guide

Document Information

Using This Documentation

Understanding the Servers

Preparing the Site

Site Preparation Checklist

General Installation Site Guidelines

Reviewing the Physical Specifications

Physical Dimensions (Rackmounted Servers)

Physical Dimensions (Stand-Alone Servers)

Installation and Service Area Dimensions (Sun Rack II)

Installation and Service Area Dimensions (Oracle Rack)

Rackmounted Server Turning Radius

Leveling Feet and Caster Dimensions (Sun Rack II)

Leveling Feet and Caster Dimensions (Oracle Rack)

Raised Floor Load-Bearing Weight Requirements

Cable Routing Floor Opening Specifications (Sun Rack II)

Cable Routing Floor Opening Specifications (Oracle Rack)

Reviewing the Power Requirements

Power Supply Specifications

Server Power Consumption

PDU Specifications

PDU Power Cord Specifications

PDU Power Cord Plugs

Facility Power Receptacles

Facility Power Requirements

Understanding Power Cord-to-PDU Relationships

Stand-Alone Server Power Cord Requirements

Grounding Requirements

Circuit Breaker Capacity Requirements

Preparing for Cooling

Environmental Requirements

Airborne Contaminates

Heat Dissipation and Airflow Requirements

Cooling Airflow From Ceiling Vents

Cooling Airflow From Perforated Floor Tiles

Ambient Temperature and Humidity Measurement

Preparing the Unloading Route and Unpacking Area

Rackmounted Server Shipping Container Specifications

Stand-Alone Server Shipping Container Dimensions

Loading Dock and Receiving Area Requirements

Access Route Requirements

Rackmounted Server Unpacking Area

Stand-Alone Server Unpacking Area

Planning Network Addresses

Planning Storage Devices

Preparing for Installation

Installing a Rackmounted Server

Installing a Stand-Alone Server in a Rack

Connecting Cables

Powering On the Server for the First Time

Language:

Rackmounted Server Turning Radius

When turning the server, temporarily provide additional space in front or rear of the installation site beyond the minimum aisle width. The server requires at least 52 in. (1.32m) of space to turn.

image:Figure showing the turning radius of the rack.

No.	Description
1	Turning the front of the server into the installation site
2	Turning the rear of server into the installation site

Related Information

Copyright © 2015, 2017, Oracle and/or its affiliates. All rights reserved.