Go to main content
Index
A
- AC connections
- facility receptacles
Facility Power Receptacles
- PDUs
Power Cord-to-PDU Relationship (SPARC M7-16)
Power Cord-to-PDU Relationship (SPARC M8-8 and SPARC M7-8)
PDU Specifications
- power requirements
Facility Power Requirements
- power supplies
Power Cord-to-PDU Relationship (SPARC M7-16)
Power Cord-to-PDU Relationship (SPARC M8-8 and SPARC M7-8)
- rackmounted SPARC M7-16 server
Power Cord-to-PDU Relationship (SPARC M7-16)
- rackmounted SPARC M7-8 server
Power Cord-to-PDU Relationship (SPARC M8-8 and SPARC M7-8)
- stand-alone server
Stand-Alone Server Power Cord Requirements
- stand-alone SPARC M7-8 server
Power Cord-to-PDU Relationship (SPARC M8-8 and SPARC M7-8)
- stand-alone SPARC M8-8 server
Power Cord-to-PDU Relationship (SPARC M8-8 and SPARC M7-8)
- AC inputs
- power supply relationship
Power Cord-to-PDU Relationship (SPARC M7-16)
Power Cord-to-PDU Relationship (SPARC M8-8 and SPARC M7-8)
PDU Power Cord Facility Grid Relationship
- AC OK LEDs
- monitoring during power on
Monitor LEDs
- acclimatization time
Receive the Server
- Active SP
- described
SP Redundancy Considerations
SP Cable Requirements
- fallback miniroot image
Oracle Solaris Installation Considerations
- logging in to
Log In to the Active SP
- network addresses
Required Oracle ILOM Network Addresses
SP Network Addresses
- status
Log In to the Active SP
- airborne contaminates, maximum allowed
Airborne Contaminates
- airflow requirements
Heat Dissipation and Airflow Requirements
- altitude
- Chinese regulations
Environmental Requirements
- requirements
Environmental Requirements
- setting
Set the Server Altitude
- temperature ranges
Environmental Requirements
- ambient temperature
- measuring
Ambient Temperature and Humidity Measurement
- range
Environmental Requirements
- anti-tilt legs, extending
Prepare and Stabilize the Rack
- antistatic wrist strap
Attach an Antistatic Wrist Strap
- area required for installation
Installation and Service Area Dimensions (Oracle Rack)
Installation and Service Area Dimensions (Sun Rack II)
- Auto Service Request See
Oracle Auto Service Request
C
- cabling
- cable routing
Rear Cable Routing Options
- connections
- mandatory
Cable Connections and Network Addresses
- maximum
Maximum Cable Connections
- floor hole dimensions
Cable Routing Floor Opening Specifications (Oracle Rack)
Cable Routing Floor Opening Specifications (Sun Rack II)
- ground cable
(Optional) Attach a Grounding Cable
- management devices
Cable Management Devices
- NET MGT 0 ports
Connect SP Cables
- network addresses
Cable Connections and Network Addresses
- network cables
Connect Network and Data Cables
- other data cables
Connect Network and Data Cables
- PCIe cards
Connect Network and Data Cables
- PDU power cords, connecting
Connect the PDU Power Cords
- rack cables
Connecting Rack Cables
- requirements
Cable Connections and Network Addresses
- routing down
Rear Cable Routing Options
- routing up
Rear Cable Routing Options
- securing in rack
Secure Cables
- SER MGT 0 ports
Connect Terminals or Emulators to the SP SER MGT Ports
Connect SP Cables
- SP cables
SP Cable Requirements
- SPPs
Confirm SPP Cable Connections (SPARC M7-16 Server)
- cage nut
- insertion tool
Insert Cage Nuts Into Rail Holes
- installing
Insert Cage Nuts Into Rail Holes
- caster dimensions
Leveling Feet and Caster Dimensions (Oracle Rack)
Leveling Feet and Caster Dimensions (Sun Rack II)
- ceiling vents, cooling
Cooling Airflow From Ceiling Vents
- checklist, site preparation
Site Preparation Checklist
- circuit breakers
Facility Power Requirements- capacity
Circuit Breaker Capacity Requirements
- local power disconnect
PDU Power Cord Specifications
- PDUs
Supply Power to the Server
- switching off
Connect the PDU Power Cords
- time-to-trip requirements
Circuit Breaker Capacity Requirements
- clearance, airflow requirements
Heat Dissipation and Airflow Requirements
- CMIOU chassis
- physical dimensions
Physical Dimensions (Stand-Alone Servers)
- CMIOUs
- described
SPARC M7-16 Server DCUs
SPARC M8-8 and SPARC M7-8 Servers DCUs
- SPARC M7-16 server DCUs
SPARC M7-16 Server DCUs
- SPARC M7-8 server DCU
SPARC M8-8 and SPARC M7-8 Servers DCUs
- SPARC M8-8 server DCU
SPARC M8-8 and SPARC M7-8 Servers DCUs
- components
- SPARC M7-16 server
- front
SPARC M7-16 Server Front Components (Installation)
- rear
SPARC M7-16 Server Rear Components (Installation)
- SPARC M7-8 server
- front
SPARC M8-8 and SPARC M7-8 Server Front Components (Installation)
- rear
SPARC M8-8 and SPARC M7-8 Server Rear Components (Installation)
- SPARC M8-8 server
- front
SPARC M8-8 and SPARC M7-8 Server Front Components (Installation)
- rear
SPARC M8-8 and SPARC M7-8 Server Rear Components (Installation)
- configurations
- Oracle Solaris OS parameters
Oracle Solaris OS Configuration Parameters
- configuring
- Oracle ILOM
Additional Software Configuration and Testing
- Oracle Solaris OS
Oracle Solaris OS Configuration Parameters
- cooling system
- ceiling vents
Cooling Airflow From Ceiling Vents
- perforated floor tiles
Cooling Airflow From Perforated Floor Tiles
- requirements
Cooling Airflow From Ceiling Vents
- copper reactivity rate
Maximum Gaseous Contaminate Severity Levels for Copper and Silver
D
- data cables, securing
Secure Cables
- DCUs
- CMIOUs
SPARC M7-16 Server DCUs
SPARC M8-8 and SPARC M7-8 Servers DCUs
- components
SPARC M7-16 Server DCUs
SPARC M8-8 and SPARC M7-8 Servers DCUs
- described
SPARC M7-16 Server DCUs
SPARC M8-8 and SPARC M7-8 Servers DCUs
- SPARC M7-16 server
SPARC M7-16 Server DCUs
- SPARC M7-8 server
SPARC M8-8 and SPARC M7-8 Servers DCUs
- SPARC M8-8 server
SPARC M8-8 and SPARC M7-8 Servers DCUs
- depth, server
- doors closed
Physical Dimensions (Rackmounted Servers)
- doors removed
Physical Dimensions (Rackmounted Servers)
- packaged
Stand-Alone Server Shipping Container Dimensions
Rackmounted Server Shipping Container Specifications
- DHCP, Oracle ILOM, not supported
Set Oracle ILOM Network Addresses (IPv4)
Required Oracle ILOM Network Addresses
SP Network Addresses
- dimensions
- casters
Leveling Feet and Caster Dimensions (Oracle Rack)
Leveling Feet and Caster Dimensions (Sun Rack II)
- floor cutout (opening)
Cable Routing Floor Opening Specifications (Oracle Rack)
Cable Routing Floor Opening Specifications (Sun Rack II)
- installation area
Installation and Service Area Dimensions (Oracle Rack)
Installation and Service Area Dimensions (Sun Rack II)
- leveling feet
Leveling Feet and Caster Dimensions (Oracle Rack)
Leveling Feet and Caster Dimensions (Sun Rack II)
- rack units
Physical Dimensions (Stand-Alone Servers)
- server
Physical Dimensions (Stand-Alone Servers)
Physical Dimensions (Rackmounted Servers)
- shipping container
Stand-Alone Server Shipping Container Dimensions
Rackmounted Server Shipping Container Specifications
- domain configurable units See
DCU
E
- environmental requirements
Environmental Requirements
- ESD
- precautions
ESD Precautions
- wrist strap
Attach an Antistatic Wrist Strap
F
- facility power
- center-point grounded
Facility Power Requirements
- receptacle
Facility Power Receptacles
- requirements
Facility Power Requirements
- fallback miniroot image on Active SP
Oracle Solaris Installation Considerations
- FC storage devices
- planning
FC Storage Devices
- features
- SPARC M7-16 server
SPARC M7-16 Server Overview
- SPARC M7-8 server
SPARC M7-8 Server Overview
- SPARC M8-8 server
SPARC M8-8 Server Overview
- Fibre Channel See
FC
- filler panels, installing
Install Filler Panels
- flash accelerator PCIe cards
- storage devices
- default locations
Oracle Flash Accelerator PCIe Cards
- planning
Oracle Flash Accelerator PCIe Cards
G
- gaps in floor, using metal plate to cross over
Use a Metal Plate to Cross Gaps in the Floor
- gaseous and particulate guidelines
Maximum Gaseous Contaminate Severity Levels for Copper and Silver
- ground cable, attaching
(Optional) Attach a Grounding Cable
- grounding requirements
Grounding Requirements
H
- handling precautions
Handling Precautions
- heat dissipation
Heat Dissipation and Airflow Requirements
- height, server
- packaged
Stand-Alone Server Shipping Container Dimensions
Rackmounted Server Shipping Container Specifications
- unpackaged
Physical Dimensions (Stand-Alone Servers)
Physical Dimensions (Rackmounted Servers)
- humidity
- measuring
Ambient Temperature and Humidity Measurement
- ramp rate
Environmental Requirements
- requirements
Environmental Requirements
I
- ILOM See
Oracle ILOM
- incline requirements
Access Route Requirements
Environmental Requirements
- InfiniBand
- storage devices
- planning
InfiniBand Storage Devices
- inrush current
Power Supply Specifications
- installing
- antistatic wrist strap
Attach an Antistatic Wrist Strap
- area required for installation
Installation and Service Area Dimensions (Oracle Rack)
Installation and Service Area Dimensions (Sun Rack II)
- cage nuts
Insert Cage Nuts Into Rail Holes
- equipment required
Tools and Equipment Needed for Installation
- filler panels
Install Filler Panels
- optional components
Optional Component Installation
- Oracle Solaris OS parameters
Oracle Solaris OS Configuration Parameters
- post-installation tasks
Additional Software Configuration and Testing
- rackmounted server
- installation task overview
Rackmounted Server Installation Task Overview
- moving
Move the Server to the Installation Site
- preparing site
Confirm the Site Preparation
- receiving server
Receive the Server
- stand-alone server
- in a rack
Install and Secure the Server
Installing a Stand-Alone Server in a Rack
- installation task overview
Stand-Alone Server Installation Task Overview
- rackmount kit
Rackmount Kit
- tools required
Tools Required for Stand-Alone Server Installation
Tools and Equipment Needed for Installation
- IP over InfiniBand See
IPoIB
- IPoIB
- Oracle Solaris OS documentation
Oracle Solaris Boot Pool and IPoIB Documentation
- iSCSI
- storage devices
- planning
iSCSI Storage Devices
- using Ethernet
iSCSI Storage Devices
- using IPoIB
InfiniBand Storage Devices
L
- LDom See
logical domain
- LEDs
- monitoring during power on
Monitor LEDs
- leveling feet
- dimensions
Leveling Feet and Caster Dimensions (Oracle Rack)
Leveling Feet and Caster Dimensions (Sun Rack II)
- lowering
Lower the Leveling Feet (Oracle Rack)
Lower the Leveling Feet (Sun Rack II)
- raising
Raise the Leveling Feet (Oracle Rack)
Raise the Leveling Feet (Sun Rack II)
- lightning arrester
Facility Power Requirements
- loading dock requirements
Loading Dock and Receiving Area Requirements
- logging in
- to Active SP
Log In to the Active SP
- logical domains
- described
Firmware and Software Environment
- documentation
Additional Software Configuration and Testing
- network addresses
Oracle VM Server for SPARC Network Addresses
Cable Connections and Network Addresses
- lower rear bracket
Install the Lower Rear Bracket
M
- managing
- cables
Cable Management Devices
- mechanical lift requirements
Tools Required for Stand-Alone Server Installation
- mechanical lift, raising stand-alone server
Raise Server Using a Mechanical Lift
- metal plate, crossing gaps in floor
Use a Metal Plate to Cross Gaps in the Floor
- metering units See
PDU metering units
- miniroot, fallback image on Active SP
Oracle Solaris Installation Considerations
- mounting holes
- RETMA rails
SPARC M8-8 and SPARC M7-8 Server Locations in an Oracle Rack
Oracle Rack Requirements
- moving server
- crossing gaps in floor
Use a Metal Plate to Cross Gaps in the Floor
- to installation site
Move the Server to the Installation Site
- up or down ramps
Move Server Up or Down a Ramp
N
- NET MGT 0 ports
- cabling
Connect SP Cables
- described
SP Cable Requirements
- network addresses
Required Oracle ILOM Network Addresses
SP Network Addresses
O
- OpenBoot
- overview
Firmware and Software Environment
- prompt
Power On a Server PDomain for the First Time
- Oracle Auto Service Request
Oracle Auto Service Request Software
- Oracle ILOM
- Active SP, logging in
Log In to the Active SP
- altitude, setting
Set the Server Altitude
- described
Firmware and Software Environment
- DHCP not supported
Set Oracle ILOM Network Addresses (IPv4)
Required Oracle ILOM Network Addresses
SP Network Addresses
- documentation
Additional Software Configuration and Testing
- network addresses
- assigning
Setting Oracle ILOM Network Addresses
- displaying
Set Oracle ILOM Network Addresses (IPv4)
- IPv4
Set Oracle ILOM Network Addresses (IPv4)
- IPv6
Set Oracle ILOM Network Addresses (IPv6)
- required
Required Oracle ILOM Network Addresses
- preinstalled
Software Requirements
- prompt
Log In to the Active SP
- root password
Log In to the Active SP
- system_altitude property
Set the Server Altitude
- tasks, additional
Additional Software Configuration and Testing
- Oracle Solaris OS
- configuration parameters
Oracle Solaris OS Configuration Parameters
- configuring
Configure External Storage Devices
Configure the Oracle Flash Accelerator PCIe Card
- described
Firmware and Software Environment
- documentation
Additional Software Configuration and Testing
- exploring
Additional Software Configuration and Testing
- fresh installations
Oracle Solaris Installation Considerations
- IPoIB documentation
Oracle Solaris Boot Pool and IPoIB Documentation
- links
Additional Software Configuration and Testing
- network addresses
Network Interface Card Cables and Network Addresses
- notes
Oracle Solaris Installation Considerations
- parameters
Oracle Solaris OS Configuration Parameters
- preinstalled
Software Requirements
- Oracle VM Server for SPARC
- described
Firmware and Software Environment
- documentation
Additional Software Configuration and Testing
- network addresses
Oracle VM Server for SPARC Network Addresses
- preinstalled
Software Requirements
- Oracle VTS
- documentation
Additional Software Configuration and Testing
- preinstalled
Software Requirements
- overview
- SPARC M7-16 server
SPARC M7-16 Server Overview
- SPARC M7-8 server
SPARC M7-8 Server Overview
- SPARC M8-8 server
SPARC M8-8 Server Overview
P
- PCIe cards See
flash accelerator PCIe cards- cabling
Connect Network and Data Cables
Connect Network and Data Cables
- network addresses
Network Interface Card Cables and Network Addresses
- online list of supported cards
Planning Storage Devices
- storage device requirements
Planning Storage Devices
- PDomain SPM
- network addresses
SP Network Addresses- assigning
Required Oracle ILOM Network Addresses
- PDomains
- described
SPARC M7-16 Server PDomains
- network addresses
- assigning
Required Oracle ILOM Network Addresses
- described
Network Interface Card Cables and Network Addresses
- redundancy
Network Interface Card Cables and Network Addresses
- network card locations, default
Required Network Interface Card Installation
- powering on
Power On a Server PDomain for the First Time
- SPARC M7-16 server
SPARC M7-16 Server PDomains
- SPARC M7-8 server
SPARC M8-8 and SPARC M7-8 Server Static PDomains
- SPARC M8-8 server
SPARC M8-8 and SPARC M7-8 Server Static PDomains
- static, described
SPARC M8-8 and SPARC M7-8 Server Static PDomains
- PDU metering units
- cabling
(Optional) Connect PDU Management Cables
- NET MGT port
- cabling
(Optional) Connect PDU Management Cables
- described
(Optional) PDU Cables and Network Addresses
- network addresses
(Optional) PDU Cables and Network Addresses
- SER MGT port
- cabling
(Optional) Connect PDU Management Cables
- described
(Optional) PDU Cables and Network Addresses
- PDU power cords
- connecting
Connect the PDU Power Cords
- dual power grids
Facility Power Requirements
- grounding requirements
Grounding Requirements
- IEC 60309 IP44
PDU Power Cord Specifications
- labeling
Connect the PDU Power Cords
- length
PDU Power Cord Specifications
- NEMA L21-30P
PDU Power Cord Specifications
- plugs
PDU Power Cord Plugs
- power supply relationship
Power Cord-to-PDU Relationship (SPARC M7-16)
Power Cord-to-PDU Relationship (SPARC M8-8 and SPARC M7-8)
- receptacle
Facility Power Receptacles
- routing
Connect the PDU Power Cords
- specifications
PDU Power Cord Specifications
- PDUs
- circuit breakers
Supply Power to the Server
- facility power requirements
Facility Power Requirements
- network addresses
(Optional) PDU Cables and Network Addresses
Cable Connections and Network Addresses
- power cord plugs
PDU Power Cord Plugs
- power cord-to-PDU relationship
Power Cord-to-PDU Relationship (SPARC M7-16)
Power Cord-to-PDU Relationship (SPARC M8-8 and SPARC M7-8)
- specifications
PDU Specifications
- physical domains See
PDomains
- port covers
Connect SP Cables
Confirm SPP Cable Connections (SPARC M7-16 Server)
SP Cable Requirements
- power
- calculator
Server Power Consumption
Power Supply Specifications
- consumption
Server Power Consumption
Power Supply Specifications
- facility requirements
Facility Power Requirements
- PDU specifications
PDU Specifications
- power consumption monitor See
PDU metering units
- power cords
- grounding requirements
Grounding Requirements
- plug specifications
PDU Power Cord Plugs
- power supply relationship
Stand-Alone Server Power Cord Requirements
- receptacle specifications
Facility Power Receptacles
- stand-alone server, preparing
Prepare the Stand-Alone Server Power Cords
- power grids
- requirements
Facility Power Requirements
- uninterruptible power supplies
Facility Power Requirements
- power on server
Supply Power to the Server
- power supplies
- LEDs
Monitor LEDs
- PDU power cord relationship
Power Cord-to-PDU Relationship (SPARC M7-16)
Power Cord-to-PDU Relationship (SPARC M8-8 and SPARC M7-8)
PDU Power Cord Facility Grid Relationship
- redundant operation
PDU Power Cord Facility Grid Relationship
- power supply
- AC voltage range
Power Supply Specifications
- capacity
Power Supply Specifications
- efficiency
Power Supply Specifications
- frequencies
Power Supply Specifications
- inrush current
Power Supply Specifications
- output
Power Supply Specifications
- power cord relationship
Stand-Alone Server Power Cord Requirements
- protective earth current
Power Supply Specifications
- specifications
Power Supply Specifications
- preparing for installation
- checklist
Site Preparation Checklist
- general guidelines
General Installation Site Guidelines
- site preparation
Confirm the Site Preparation
- pushing the server
Move the Server to the Installation Site
R
- rack
- compatibility
Rack Compatibility
- mounting holes, supported
Oracle Rack Requirements
- stabilizing
Prepare and Stabilize the Rack
- rack unit dimensions
Physical Dimensions (Stand-Alone Servers)
- rackmount kit
Rackmount Kit
- rackmounted server
- bridging floor gaps while moving server
Use a Metal Plate to Cross Gaps in the Floor
- cables
- managing
Cable Management Devices
- routing
Rear Cable Routing Options
- securing
Secure Cables
- caster dimensions
Leveling Feet and Caster Dimensions (Oracle Rack)
Leveling Feet and Caster Dimensions (Sun Rack II)
- cautions while moving
Move the Server to the Installation Site
- connecting cables
Connecting Rack Cables
- defined
Rackmounted and Stand-Alone Servers
- dimensions
Physical Dimensions (Rackmounted Servers)
- leveling feet
- dimensions
Leveling Feet and Caster Dimensions (Oracle Rack)
Leveling Feet and Caster Dimensions (Sun Rack II)
- lowering
Lower the Leveling Feet (Oracle Rack)
Lower the Leveling Feet (Sun Rack II)
- raising
Raise the Leveling Feet (Oracle Rack)
Raise the Leveling Feet (Sun Rack II)
- moving
Moving the Server
- PDU-to-power-supply cabling
Power Cord-to-PDU Relationship (SPARC M7-16)
Power Cord-to-PDU Relationship (SPARC M8-8 and SPARC M7-8)
- powering on
Supply Power to the Server
- preparing site
Confirm the Site Preparation
- pushing
Move the Server to the Installation Site
- ramp, using
Move Server Up or Down a Ramp
- receiving
Receive the Server
- routing cables
Connect the PDU Power Cords
- stabilizing
Lower the Leveling Feet (Oracle Rack)
Lower the Leveling Feet (Sun Rack II)
- task overview, installation
Rackmounted Server Installation Task Overview
- turning radius
Rackmounted Server Turning Radius
Installation and Service Area Dimensions (Oracle Rack)
- unpacking
Unpack the Server
- rackmounting stand-alone server
- anti-tilt legs, extending
Prepare and Stabilize the Rack
- cage nuts, installing
Insert Cage Nuts Into Rail Holes
- installing in rack
Install and Secure the Server
- kit
Rackmount Kit
- lower rear bracket, installing
Install the Lower Rear Bracket
- marking the location
Mark the Rail Mounting Hole Locations
- mechanical lift requirements
Tools Required for Stand-Alone Server Installation
- mechanical lift, using
Raise Server Using a Mechanical Lift
- power cords, preparing
Prepare the Stand-Alone Server Power Cords
- rackmount kit comparison
Rackmount Kit Comparison
- racks, compatible
Oracle Rack Requirements
- safety warnings
Rack Cautions
- shelf rails, installing
Install the Rackmount Shelf Rails
- stabilizing the rack
Prepare and Stabilize the Rack
- tools required
Tools Required for Stand-Alone Server Installation
- unpacking
Unpack the Stand-Alone Server
- raised floor
- access route
Access Route Requirements
- cable cutout
Cable Routing Floor Opening Specifications (Oracle Rack)
Cable Routing Floor Opening Specifications (Sun Rack II)
- cooling
Cooling Airflow From Perforated Floor Tiles
- server load
Raised Floor Load-Bearing Weight Requirements
- weight requirements
Raised Floor Load-Bearing Weight Requirements
- ramp, moving rackmounted server up or down
Move Server Up or Down a Ramp
- receptacle, facility power
Facility Power Receptacles
- relative humidity
Environmental Requirements
- requirements
- access route
Access Route Requirements
- acclimatization
Loading Dock and Receiving Area Requirements
- airborne contaminates
Airborne Contaminates
- airflow
Heat Dissipation and Airflow Requirements
- ambient temperature
Environmental Requirements
- cooling
Cooling Airflow From Ceiling Vents
- copper reactivity rate
Maximum Gaseous Contaminate Severity Levels for Copper and Silver
- environmental
Environmental Requirements
- heat dissipation
Heat Dissipation and Airflow Requirements
- loading dock
Loading Dock and Receiving Area Requirements
- relative humidity
Environmental Requirements
- shock
Environmental Requirements
- silver reactivity rate
Maximum Gaseous Contaminate Severity Levels for Copper and Silver
- vibration
Environmental Requirements
- RETMA rails
- depth
Prepare and Stabilize the Rack
- mounting hole locations
Mark the Rail Mounting Hole Locations
- requirements
Oracle Rack Requirements
- width
Prepare and Stabilize the Rack
- root password, Oracle ILOM
Log In to the Active SP
S
- safety information
Oracle Safety Information
- SAN
FC Storage Devices
- SER MGT 0 ports
- cabling
Connect Terminals or Emulators to the SP SER MGT Ports
Connect SP Cables
SP Cable Requirements
- described
SP Cable Requirements
- serial connection
Connect Terminals or Emulators to the SP SER MGT Ports
- server
- altitude, setting
Set the Server Altitude
- bridging floor gaps while moving server
Use a Metal Plate to Cross Gaps in the Floor
- clearance
Heat Dissipation and Airflow Requirements
- dimensions
- packaged
Stand-Alone Server Shipping Container Dimensions
Rackmounted Server Shipping Container Specifications
- unpackaged
Physical Dimensions (Stand-Alone Servers)
Physical Dimensions (Rackmounted Servers)
- handling precautions
Handling Precautions
- moving
Moving the Server
- PDomain, powering on
Power On a Server PDomain for the First Time
- powering on
Supply Power to the Server
- pushing
Move the Server to the Installation Site
- ramp, using
Move Server Up or Down a Ramp
- receiving
Receive the Server
- stabilizing
Lower the Leveling Feet (Oracle Rack)
Lower the Leveling Feet (Sun Rack II)
- service area
Installation and Service Area Dimensions (Oracle Rack)
Installation and Service Area Dimensions (Sun Rack II)
- set /SP system_altitude command
Set the Server Altitude
- set /SP/network command
Set Oracle ILOM Network Addresses (IPv4)
- shipping container
- access route
Access Route Requirements
- acclimatization
Loading Dock and Receiving Area Requirements
- dimensions
Stand-Alone Server Shipping Container Dimensions
Rackmounted Server Shipping Container Specifications
- rackmounted server
- unpacking
Unpack the Server
- unpacking area
Rackmounted Server Unpacking Area
- stand-alone server
- unpacking
Unpack the Server
- unpacking area
Stand-Alone Server Unpacking Area
- shock requirements
Environmental Requirements
- show /SP/network command
Set Oracle ILOM Network Addresses (IPv4)
- show command
Power On a Server PDomain for the First Time
- silver reactivity rate
Maximum Gaseous Contaminate Severity Levels for Copper and Silver
- site preparation See
preparing for installation
- slide rail assembly
Rackmount Kit
- software, preinstalled
Software Requirements
- Solaris See
Oracle Solaris OS
- SPARC M7-16
- DCUs
SPARC M7-16 Server DCUs
- features
SPARC M7-16 Server Overview
- front component locations
SPARC M7-16 Server Front Components (Installation)
- PDomains
SPARC M7-16 Server PDomains
- rear component locations
SPARC M7-16 Server Rear Components (Installation)
- SPPs, cabling
Confirm SPP Cable Connections (SPARC M7-16 Server)
- SPARC M7-8
- DCUs
SPARC M8-8 and SPARC M7-8 Servers DCUs
- differences between SPARC M8-8
SPARC M8-8 and SPARC M7-8 Server Differences
- features
SPARC M7-8 Server Overview
- front component locations
SPARC M8-8 and SPARC M7-8 Server Front Components (Installation)
- installing in rack
Installing a Stand-Alone Server in a Rack
- rear component locations
SPARC M8-8 and SPARC M7-8 Server Rear Components (Installation)
- static PDomain
SPARC M8-8 and SPARC M7-8 Server Static PDomains
- SPARC M8-8
- differences between SPARC M7-8
SPARC M8-8 and SPARC M7-8 Server Differences
- features
SPARC M8-8 Server Overview
- front component locations
SPARC M8-8 and SPARC M7-8 Server Front Components (Installation)
- installing in rack
Installing a Stand-Alone Server in a Rack
- rear component locations
SPARC M8-8 and SPARC M7-8 Server Rear Components (Installation)
- static PDomain
SPARC M8-8 and SPARC M7-8 Server Static PDomains
- specifications
- installation area
Installation and Service Area Dimensions (Oracle Rack)
Installation and Service Area Dimensions (Sun Rack II)
- PDU power cords
PDU Power Cord Specifications
- PDUs
PDU Specifications
- power supply
Power Supply Specifications
- service area
Installation and Service Area Dimensions (Oracle Rack)
Installation and Service Area Dimensions (Sun Rack II)
- shipping container
Stand-Alone Server Shipping Container Dimensions
Stand-Alone Server Shipping Container Dimensions
Rackmounted Server Shipping Container Specifications
Rackmounted Server Shipping Container Specifications
- unpacking area
- rackmounted server
Rackmounted Server Unpacking Area
- stand-alone server
Stand-Alone Server Unpacking Area
- SPMs
- described
SPs and SPPs
- network addresses
SP Network Addresses
- SPPs
- cabling
Confirm SPP Cable Connections (SPARC M7-16 Server)
- described
SPs and SPPs
- SP cable connections
Confirm SPP Cable Connections (SPARC M7-16 Server)
- SPs
- Active SP
SP Redundancy Considerations
SP Cable Requirements
- altitude, setting
Set the Server Altitude
- cabling
Connect SP Cables
- described
SP Cable Requirements
SPs and SPPs
- DHCP not supported
SP Network Addresses
- LEDs
Monitor LEDs
- logging in to
Log In to the Active SP
- NET MGT 0 port
- cabling
Connect Terminals or Emulators to the SP SER MGT Ports
- described
SP Cable Requirements
- network
- addresses
Required Oracle ILOM Network Addresses
SP Network Addresses
Cable Connections and Network Addresses
- topology
SP Network Examples
- Oracle ILOM prompt
Log In to the Active SP
- port covers
Confirm SPP Cable Connections (SPARC M7-16 Server)
SP Cable Requirements
- redundant
SP Redundancy Considerations
SP Cable Requirements
SPs and SPPs
- root password
Log In to the Active SP
- SER MGT 0 port
- cabling
Connect Terminals or Emulators to the SP SER MGT Ports
- described
SP Cable Requirements
- serial terminal, connecting
Connect Terminals or Emulators to the SP SER MGT Ports
- SPP cable connections
Confirm SPP Cable Connections (SPARC M7-16 Server)
- Standby SP
SP Redundancy Considerations
SP Cable Requirements
- stand-alone server
- cables, routing and securing
Routing and Securing Cables
- defined
Rackmounted and Stand-Alone Servers
- dimensions
Physical Dimensions (Stand-Alone Servers)
- installing
Install and Secure the Server
Installing a Stand-Alone Server in a Rack
Stand-Alone Server Installation Task Overview
- mechanical lift, using
Raise Server Using a Mechanical Lift
- power cord-to-power supply relationship
Stand-Alone Server Power Cord Requirements
- power cords
- cabling
Stand-Alone Server Power Cord Requirements
- preparing
Prepare the Stand-Alone Server Power Cords
- powering on
Supply Power to the Server
- rack kit weight
Physical Dimensions (Stand-Alone Servers)
- racks, supported
Rack Compatibility
- Sun Rack II locations
SPARC M8-8 and SPARC M7-8 Server Locations in an Oracle Rack
- tools required, rackmounting
Tools Required for Stand-Alone Server Installation
- unpacking
Unpack the Stand-Alone Server
- Standby SP
- described
SP Cable Requirements
- redundancy characteristics
SP Redundancy Considerations
- start command
Power On a Server PDomain for the First Time
Power On a Server PDomain for the First Time
- static PDomains
- described
SPARC M8-8 and SPARC M7-8 Server Static PDomains
- storage area network See
SAN
- storage devices
- FC
- planning
FC Storage Devices
- flash accelerator PCIe cards
- planning
Oracle Flash Accelerator PCIe Cards
- InfiniBand
- planning
InfiniBand Storage Devices
- iSCSI
- planning
iSCSI Storage Devices
- options
Planning Storage Devices
- PCIe card requirements
Planning Storage Devices
- planning
Planning Storage Devices
- Sun Rack II
- installation locations
SPARC M8-8 and SPARC M7-8 Server Locations in an Oracle Rack
- requirements
Oracle Rack Requirements
- system_altitude property
Set the Server Altitude
T
- temperature
- acclimatization
Loading Dock and Receiving Area Requirements
- ambient
- measuring
Ambient Temperature and Humidity Measurement
- range
Environmental Requirements
- by altitude
Environmental Requirements
- cooling
Cooling Airflow From Perforated Floor Tiles
Cooling Airflow From Ceiling Vents
- terminal settings
Connect Terminals or Emulators to the SP SER MGT Ports
- tools
- cage nut insertion tool
Insert Cage Nuts Into Rail Holes
- tools required
- rackmounted server
Tools and Equipment Needed for Installation
- stand-alone server
Tools Required for Stand-Alone Server Installation
- turning radius
Rackmounted Server Turning Radius
Installation and Service Area Dimensions (Oracle Rack)
U
- uninterruptible power supplies
Facility Power Requirements
- unloading
- rackmounted server
Receive the Server
- stand-alone server
Unpack the Stand-Alone Server
- unpacking
- area
- rackmounted server
Rackmounted Server Unpacking Area
- stand-alone server
Stand-Alone Server Unpacking Area
- rackmounted server
Unpack the Server
- stand-alone server
Unpack the Stand-Alone Server
V
- vibration requirements
Environmental Requirements
W
- weight
- CMIOU chassis
Physical Dimensions (Stand-Alone Servers)
- packaged
Stand-Alone Server Shipping Container Dimensions
Stand-Alone Server Shipping Container Dimensions
- rackmounted shipping container alone
Rackmounted Server Shipping Container Specifications
- raised floor requirements
Raised Floor Load-Bearing Weight Requirements
- SPARC M7-16, packaged
Rackmounted Server Shipping Container Specifications
- SPARC M7-16, unpackaged
Physical Dimensions (Rackmounted Servers)
- SPARC M7-8, packaged
Stand-Alone Server Shipping Container Dimensions
Rackmounted Server Shipping Container Specifications
- SPARC M7-8, unpackaged
Physical Dimensions (Rackmounted Servers)
- SPARC M8-8, packaged
Stand-Alone Server Shipping Container Dimensions
Rackmounted Server Shipping Container Specifications
- SPARC M8-8, unpackaged
Physical Dimensions (Rackmounted Servers)
- stand-alone shipping container alone
Stand-Alone Server Shipping Container Dimensions
- width, server
- packaged
Stand-Alone Server Shipping Container Dimensions
Rackmounted Server Shipping Container Specifications
- unpackaged
Physical Dimensions (Stand-Alone Servers)
Physical Dimensions (Rackmounted Servers)
- wrist strap, installing
Attach an Antistatic Wrist Strap