Go to main content

SPARC M8 and SPARC M7 Servers Installation Guide

Exit Print View

Updated: September 2017

Lower the Leveling Feet (Oracle Rack)

Use leveling feet at the four corners of the server to stabilize the server to the floor.

  1. Open the server doors.
  2. Insert a 6-mm hex wrench in the hole on top of the leveling foot. Turn the wrench clockwise to lower the leveling foot to the floor.

    Alternatively, you can use your fingers to turn the leveling foot clockwise to lower it to the floor. When lowered correctly, the four leveling feet should support the full weight of the server.

    image:Figure showing how to lower the leveling foot on an Oracle Rack                                 Cabinet 1242.
  3. Use a 18-mm wrench to secure the locking nut to the rack.

    Turn the wrench counter-clockwise to secure the locking nut.

  4. Close the server doors.

Related Information