SPARC T5-2 Server Service Manual

Install a Drive Filler Panel

1. Remove a drive or a drive filler panel.

   See Remove a Drive or Remove a Drive Filler Panel.

2. Fully open the release lever on the drive filler panel.
3. Install the drive by completing the following tasks.
   
   1. Slide the drive filler panel into the drive slot until it is fully seated.
   2. Close the latch to lock the filler panel in place.

Related Information

• Locate a Faulty Drive

• Remove a Drive

• Install a Drive

• Remove a Drive Filler Panel

• Verify Drive Functionality