SPARC T5-2 Server Service Manual

Install the Battery

1. Remove the battery.

   See Remove the Battery.

2. Attach an antistatic wrist wrap and unpack the replacement battery.
3. Press the new battery into the battery holder with the positive side (+) facing away from the metal tab that holds it in place.

   If the SP is configured to synchronize with a network time server using NTP, the Oracle ILOM clock will be reset as soon as the server is powered on and connected to the network. Otherwise, proceed to the next step.

4. If the SP is not configured to use NTP, you must reset the Oracle ILOM clock using the Oracle ILOM CLI or the web interface.

   For instructions, see the Oracle ILOM documentation.

5. Return the server to operation.
   1. Return the server to the normal operating position.

      See Return the Server to the Normal Operating Position.

   2. Reinstall the power cords to the power supplies and power on the server.

      See Returning the Server to Operation.

Related Information

• Remove the Battery