SPARC T5-2 Server Service Manual

Run POST With Maximum Testing

This procedure describes how to configure the server to run the maximum level of POST.

1. Log in to Oracle ILOM.

   See Log In to Oracle ILOM (Service).

2. Set the virtual keyswitch to diag so that POST runs in service mode.

   -> set /HOST keyswitch_state=diag
   Set keyswitch_state to Diag
   

3. Reset the server so that POST runs.

   There are several ways to initiate a reset. This example shows a reset using the reset command.

   -> reset /SYS
   Are you sure you want to reset /SYS (y/n)? y
   Resetting /SYS
   

Related Information

• POST Overview

• Oracle ILOM Properties That Affect POST Behavior

• Configure POST